Super Glide Custom FXRC

V-Twin - 35-0428 - Intake Manifold Flange Kit Natural FinishDescriptionIntake manifold flange kit with natural finish comes with seal and screws. Fits:FLST 1986-2006FXST 1984-2006FLT 1986-2006XL...

Chrome intake manifold flange kit with seal and screws. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

Chrome petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for...

Chrome handlebar throttle clamp and tube set is for dual cable applications. Fits:FXR 1982-1994FXST 1984-1995FX 1982-1984FL 1982-1984FLST 1986-1995XL 1982-1995FLT 1982-1995FXD 1991-1994Additional...

Dual handlebar throttle handle with grips. Grips are without chrome end plugs. Fits:FLT 1979-1995FXR 1982-1994FXST 1984-1995FLST 1986-1995XL 1981-1995FXD 1991-1995FL 1981-1984FX 1981-1984Additional...

V-Twin - 35-0220 - Carburetor Idle ScrewDescriptionKeihin and CV carburetor idle screw allows for easier adjustment by hand. Fits:FL 1976-1984FXD 1991-2017FX 1971-1984XL 1976-UPFLST 1986-2017FXST...

Keihin carburetor rebuild contains needle, proper O-rings, and diaphragm. Fits: FL 1984-1984 FXST 1984-1989 XL 1984-1989 FXR 1984-1989 FX 1984-1984 FLST 1986-1989 FLT 1984-1984 Additional...

Sifton intake manifold flange kit features zinc flanges. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

V-Twin - 35-0134 - High Flow Fuel Inlet BrassDescriptionBrass high flow carburetor fuel inlet replaces broken fuel inlet to the carburetor bowl for modified engines. For all Keihin carburetors...

Chrome petcock nut Fits:FX 1975-1984FL 1975-1984FXR 1982-1994FXD 1991-2017XL 1975-1995FLST 1986-2017FXST 1984-2017Additional Information

V-Twin - 35-0071 - 1 inch Twist Grip Assembly ChromeDescriptionSingle 1" cable type throttle handle assembly with Anderson type grips features chrome throttle housing.Cable not included. ...

Chrome OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

Black OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

V-Twin - 34-1687 - Black Wyatt Gatling Air Cleaner AssemblyDescriptionWyatt Gatling assembly includes round air cleaner with black mesh cover, integral breather system with bracket, and mounting kit...

Alloy air cleaner backing plate features a 3 post design to mount teardrop air cleaners.Plate is the two screw type and 160mm diameter in the round section to fit cover. Accepts Bendix-Keihin models...

Early style Bendix carburetor breather air snoot features a black cover without the filter, for Bendix and Keihin butterfly carburetors.*NOTE: Mount screws not included, must be ordered separately...

Teardrop air cleaner cover assembly is made of steel and has a smooth chrome finish. For use with Bendix and Keihin type carburetors.*NOTE: Backing plate and teardrop cover are of stamped steel...

FXR horn kit includes bracket to mount horn to top motor mount. Kit includes chrome bracket, chrome cover, 12 volt black horn and hardware.*NOTE: Horn body must be grounded after mounting. Fits:FXR...

FXR horn kit includes a black OE type horn and chrome bracket. Horn mounts to battery box underneath the seat. Horn does not accept a cover. Fits:FXR 1982-1994Additional Information

V-Twin - 33-2257 - Indicator Lamp Neutral Type GreenDescriptionGrean neutral indicator lamp, with a chrome bezel, is for 5/16" holes.This is a stock replacement and will fit most aftermarket brackets...

Lay down tail lamp with bracket features a red LED lens.*NOTE: For show or decorative use only and is not D.O.T. approved. Fits:XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL...

Round 12 volt solid state turn signal flasher. Fits:FXR 1982-1990FXST 1984-1990FLST 1984-1990FX 1973-1984FL 1964-1984XL 1973-1995Additional Information

Chrome red noid style LED lamp with laydown plate frame.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:FXST 1984-1998XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL...

This 12 volt flasher is for hazard or four flashing lights. Fits:FXST 1984-1990FLST 1984-1990FXR 1982-1984FX 1973-1984FL 1964-1984XL 1973-1995FXR 1985-1990Additional Information

Chrome laydown deco tail lamp kit includes lamp and die cast license plate holder with rubber mount block mounts. Fits:FXR 1982-1994FX 1973-1984FXD 1991-1998FL 1973-1984XL 1991-1998Additional...

Chrome die cast kit includes license plate bracket and chrome plated steel adapter. Fits:XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL 1973-1984Additional Information

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter and includes rear cylinder timing adjustment for rate of advance. Kit includes coil, 8.5mm wires, sensor...

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter, and includes rear cylinder timing adjustment for rate of advance.Ignition kit fits all 1970-1998...

Headlamp wiring harness bushing is straight type. Fits:FXR 1982-1994FX 1974-1984XL 1974-1994Additional Information OEM No.72501-74

Ignition sensor cup screw with washer.Sold in a pack of 10. *NOTE: Not for sale in California. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FL 1982-1984XL 1982-1999FLT...

FXR electric starter kit features a 6" starter motor and includes components for complete installation. Fits:FXR 1986-1988Additional Information UOM1 - K

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-2037 - Left FXR Electrical Panel BlackDescriptionFXR electrical panel for the left side features a black finish and is the flat type. Panel will mount starter relay. Use 1/4"-20 well nuts...

V-Twin - 32-2022 - Right FXR Electrical Panel BlackDescriptionFXR electrical panel for the right side features a black finish and is the offset type.Accepts a starter relay and 4 circuit breakers...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

V-Twin - 32-1910 - Battery Cable Set BlackDescriptionFour gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 3 cables. Includes extra red shrink tubing and...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Accel starter solenoid has a zinc finish.Use 4-Speed style solenoid on 1984-1988 FXST 5-Speed models. Fits:FXR 1982-1988FLT 1979-1988Additional Information

Main wiring harness kit features plastic wire in original factory color codes, with all terminals applied in vinyl loom.Handlebar and tail lamp wiring must be purchased separately. Fits:FXR...