Super Glide Police FXRP

Clevis pin fits 1982-1986 FXR brake pedal assemblies. The pin is serrated on the shoulder end. Sold as a pack of 5. *NOTE: Accepts cotter pin (OEM #515) not included. Fitment: FXR 1982-1986

FXR/FLT starter plug for the starter pivot arm. Starter plug is 1/4 inch NPT x 15/32 length x 1/4 inch. Sold in a pack of 5. Instructions: http://www.vtwinmfg.com/Instructions/12/12-1783...

FXR steel shifter lever features a chrome plated finish. Fitment: FXR 1982-1994

FXR stainless steel heel toe shifter lever is a one piece deseign for 5-speed models with mid controls. Includes 2 rubber pads. *NOTE: The distance from the center of the spline to the very end of...

FXR kickstand mount bracket features a raw finish and must be welded in place. Accepts stock kickstand pin and spring. Fitment: FXR 1982-1994

Black exhaust bracket mounting block is for FXR models. Fitment: FXR 1982-1986

FXE rear exhaust mount kit includes a black bolt on style rear pipe bracket and zinc hardware. *NOTE: The bracket bolts to the pivot bolt hex bolts to replace the weld-on bracket. Fitment: FXR...

FXR horn mount bracket is the later version with a zinc plated finish. Tech Notes: Suggested to use with #33-2116 Replica Replacement Horn Black Fitment: FXR 1984-1994

Exhaust bracket for FXR models features a raw finish. Support bracket is welded to the frame to house the isolator block available separately. *NOTE: Must order hardware separately. Fitment: FXR...

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

FXR chrome 35mm flat top stem nut fits 35 inch and 39 inch fork stems. Tech Notes: Suggested to use with #24-0827 Lower Triple Tree Chrome. Fitment: Fx 1978-1984 FXR 1982-1994 XL 1978-1987

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR inner shift washer and seal kit is for the 1/2 inch diameter inner shift shafts. Sold as a 6 piece kit. Fitment: FXR 1982-1984

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

Zinc plated FXR pedal rod end 4 piece kit includes the rod end zinc clevis pin zinc 5/16 inch x 24 thread nut and a cotter pin. *NOTE: Measures 2-3/8 inch from the hole to the end of the thread...

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16...

James Gasket - 5th Gear Clutch Side Mainshaft Seal fits '80-'E84 Big Twin 5-Speed Models (OEM #12044, 12044A) Features: Made in the U.S.A. Fitment

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two...

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit...

Uni Filter - Air Filter Element fits '84-'85 80” Evolution Big Twin Models (Except FLT, FLHT (OEM #29259-83A)) Features: Constructed of a unique, open-cell polyurethane material that allows...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball...

Small FXR shifter shaft bushing set features brass construction. Application uses one piece in the inner primary cover and the other one in the outer primary inspection cover. Fitment: FXR...

Colony - 9645-2 Cadmium OEM-Style Oil Pump Plug fits '84-'99 Evolution Big Twin Models (OEM #26263-80) Features: Made in the U.S.A. Fitment

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

V-Twin - 35mm Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models Chrome lower fork stem cover can be installed without disassembling forks. Fork stem cover is for FXR...

V-Twin - Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models (OEM #45751-71A) Chrome lower fork stem cover is 1 piece and for FXR and FXD models. Fitment: FXR...

V-Twin - 3/4" Inner Diameter Rear Axle Spacer fits '82-'94 FXR, '85-'94 FXRT Models (OEM #41591-81) Chrome rear axle spacer features 3/4" inner diameter and 1-3/16" overall length. Axle spacer is for...

V-Twin - Black Embossed Battery Side Cover fits '73-'84 FXB/FXS/FX/FXE/FXEF Models (OEM #66347-91) Battery side cover is embossed style with a black finish Fitment: FXB 1973-1984 FXWG 1985-1986 FXS...