Touring Electra Glide Classic FLHTC

Front oil tank bracket is zinc plated. Fits:FL 1965-1984Additional Information UOM1 - EA Manufacturer

Chrome cylinder air scoop brackets is for mounting an air scoop on the left side of your Big Twin Shovelhead. Bracket set has a chrome finish and makes mounting the air scoop a piece of cake...

V-Twin - 31-1015 - 10 inch Black Turn Signal Mount RearDescriptionBlack 10" rear turn signal bracket. Fits:FLHTC 2009-2013FL 1974-1984FLHR 1991-2008FLST 1986-UPFLT 1991-2008Additional Information

Black bracket set is for front fork triple tree mounting. Set includes right and left sides. Fits:FLH 1949-1984Additional Information OEM No.68603-62

Stainless steel exhaust header clamp for stock mufflers has a 3-1/2" inner diameter. Fits:FL 1978-1984Additional Information OEM No.65294-78 <

Chrome billet license plate holder measures 7" x 4". Bracket set is included. Fits:FLH 1978-1984FLT 1991-2008FLST 1986-2008Additional Information

Battery tray carrier bracket has a bright chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65

Chrome alternator plug retainer bracket bolts to the front left engine mount bolt and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

Chrome side mount tail lamp bracket will mount vertical flat side unit to FXD primary. Fits:FL 1965-1984FX 1965-1984FXST 1984-1988Additional Information

Zinc plated top motor mount is without the choke mount. Fits:FL 1948-1984Additional Information OEM No.16852-67

Regulator mount bracket attaches to engine mount and is made of steel with a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

V-Twin - 31-0776 - Chrome 7 inch Low Boyz Turn Signal Bar KitDescription7" low boyz bar kit chrome is threaded to accept stock rear turn signals and mounts to license plate bracket holes. Fits:FL...

Top motor mount chrome is without the coil mount holes. This engine mount is for Panhead and Shovelhead engines. Fits:FX 1971-1984FL 1948-1984Additional Information

Front engine mount block threads into regulator mount block.This chrome mount block acts as a nut for the front bolts and will mount the regulator. Sold in a quantity of 2. Fits:FXST 1984-1999FLST...

Side mount bracket mounts to stock swingarm and is chrome billet. This bracket will accept vertical or horizontal billet tail lamp assemblies from our selection.Order nut set separately. Fits:XL...

Dual exhaust clamp kit is for FLH models.Order pipe support for 1958-1984 appplications separately. Fits:FL 1970-1984Additional Information UOM1 -

V-Twin - 31-0661 - Chrome Seat Tab Assembly RearDescriptionRear seat tab assembly chrome has a thread size of 1/4"-28. Includes chrome spring loaded screw. Fits:FXST 1984-1999FXD 1991-1999FXR...

V-Twin - 31-0660 - Chrome Seat Tab AssemblyDescriptionSeat tab assembly chrome has a thread of 1/4" X 20. Includes spring loaded screw. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FLT...

Universal front solo seat mount includes mount and tilt up seat bracket for solo seats. Lower bracket is direct bolt onto FLH frames.The spacing between the hinge lugs measure 1-5/8". The stud thread...

Black one piece design with hardware stock style updated bracket includes nuts welded to bracket to accept cover mount screws and washers which mounts to the existing studs.Order mount studs...

Police type solo seat mount kit includes nose bracket, 2" hair pin springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Police type solo seat mount kit includes nose bracket, 2" chrome coil springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Stainless steel alternator plug retainer bracket bolts to the front left engine mount bolt, and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT...

Chrome Horn mount bracket. Fits:FLH 1968-1984FL 1968-1984Additional Information OEM No.69131-68 UOM

V-Twin - 31-0517 - Chrome 8-3/4 inch Turn Signal Mount Bar RearDescription8-3/4" chrome bracket is constructed of formed and welded steel which offers the greatest strength against vibration.The...

Solo seat T will mount police and buddy seats to all big twins with seat posts. Fabricated from square solid steel and features a black finish. Does not include bushing.Front spool has 3/8" hole for...

V-Twin - 31-0494 - Chrome 13 inch Turn Signal Mount Bar RearDescription13" chrome bar is constructed of formed and welded steel which offers the greatest strength against vibration.Threaded length on...

Front motor mount frame spacer will allow installation of a Knucklehead or Flathead engine in a 1948-1984 frame.The mount holes measure 3-1/4" center-to-center. *NOTE: The...

Chrome windshield right and left mount bracketsSold in a quantity of 2. Fits:FLHT 1983-1992FLT 1987-1992Additional Information OEM No.5806

Billet top motor mount with holes features a chrome finish.The two holes are drilled and tapped 5/16-18UNC with a center distance of 2 Fits:FX 1979-1984FLST 1986-2005FL 1979-1984FXST...

Zinc plated steel top motor mount features choke tab. Fits:FX 1971-1972FL 1977-1984Additional Information UOM1 - EA

Stanchion only is black for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do no include clamps...

Trumpet horn mount bracket for Shovelhead models. Fits:FL 1966-1984 ShovelheadAdditional Information UOM1 - EA

Stanchion only is chrome for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do not include clamps. ...

Chrome starter motor bracket fits Hitachi starter. Stock OE replacement. Fits:FL 1982-1984 Early 1984 FL with Hitachi starterFLH 1982-1984 Early 1984 FLHAdditional Information

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome steel 90  bend type turn signal mount set is used for front or rear application.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM

Cable guide clip. Fits:FL 1966-1984Additional Information OEM No.45092-66 UOM5 - PK

Battery tray carrier bracket has a chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65 UOM<

Chrome one piece bracket is for mounting spotlamps.The length between the mounting holes measures 13". Fits:FLH 1949-1984Additional Information OEM No.