Touring Electra Glide Classic FLHTC

Chrome bracket set is for front fork triple tree mounting. Set includes right and left sides.The bracket measures 1-1/2" center to center between the two top holes and 6-1/2" between the top and...

Turn signal chrome mounting kit has clamp and mounting bolt included. Kit is necessary for mounting the turn signals below spotlamp unit. Fits:FL 1968-1984Additional Information

Chrome steel flat type mount set for front or rear turn signal.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM No.68527-63

V-Twin - Zinc Plated Buddy Seat Nose Bracket fits '58-'84 FL Model Front nose seat bracket is used to mount buddy seats to mount systems and features a zinc plated finish. Fitment: FL 1958-1984

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Chrome rectifier regulator bracket mount Fits:FL 1976-1984FX 1976-1984Additional Information OEM No.74533-75B

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA<

Top engine mount replaces stock type and features a chrome finish.Mount does include choke mount for lever assembly. Fits:FX 1971-1972FL 1967-1984Additional Information

V-Twin - 31-0076 - Rear Seat T BracketDescriptionRear seat T bracket features a black finish. Allows police deluxe solo seat to be mounted on 2009-up FLT police bikes and 2021-up Highway King. For...

Chrome left vertical heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65707-77

Replica chrome muffler set includes four clamps. The muffler has an outside diameter of 3-1/4" and is 27-7/8" long. Set features non removable baffles.**CAUTION: These exhaust products are not legal...

Raw 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Chrome 15-1/4" megaphone tip features a round end with a 1-3/4" inlet. This is the tip only.Baffles and clamps not included. Fits:FL 1958-1984Additional Information

Chrome 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Bronx FL muffler tip kit includes chrome 24" muffler set. Set features two Bronx tips that fit on 1-7/8" outer diameter end. The inlet measures 1-3/4".For right or left side dual FLH muffler...

Exhaust heat shield 14" lower Y includes two worm clamps for installation. There is a notch on the end to fit other two i nto one FLH style header sets. Fits:FL 1970-1984Additional Information <

Chrome finish rear heat shield for 2:1 exhaust systems on Shovelheads features the cut out for the crossover pipe.Heat shield includes 2 worm drive clamps for installation. Fits:FLH...

Chrome 15-1/4" megaphone tip set has a 1-7/8" inlet to fit over OE style cigar mufflers. Features a round end.Set of two. Baffles and clamps not included. For use with stock OEM style cigar mufflers...

FL front exhaust header with built in y junction featuring a chrome finish. Rear pipe not included, order separately. Fits:FL 1970-1984Additional Information UOM<

Short heat shield is to fit over 1-3/4" exhaust pipes. Fits:FL 1958-1984Additional Information UOM1 - EA Measu

Rear heat shield features a chrome finish and is for the right side crossover pipe.*NOTE: Heat shield set is specifically true dual exhaust header pipe set and true dual chrome exhaust system...

Muffler includes one megaphone tip with heavy duty 1-7/8" clamp installed. Fits:FL 1958-1984Additional Information UOM1 - EA

Chrome 31" muffler kit for use with dual exhaust. Muffler is 31" long with upsweep design. Inlet end fits 1-3/4" outer diameter pipes. Muffler set includes 1-7/8" clamp set, and 3" hanger clamps...

Kit includes two 22" FLH full chrome mufflers and two 15" long megaphone tips with heavy duty 1-7/8" clamps.For use with right and left side dual exhaust! ...

Chrome muffler kit includes a single 22" muffler with 15" megaphone muffler tip and one 1-7/8" clamp.For one side. Fits:FL 1958-1984Additional Information U

Chrome heat shield set includes five pieces, two for the lef t and three for the right side to fit dual crossover systems .*Note: UPS may consider this part as packaged "oversize" for shipment, as...

Heat shield kit is for stock type two into one. Fits:FL 1970-1984Additional Information UOM1 - KIT Manufacture

Chrome 24" front heat shield has worm clamps included. Fits:FL 1970-1984Additional Information UOM1 - EA Manuf

Chrome rear crossover exhaust pipe are for Big Twin models with crossovers. Pipes will fit stock systems only.**CAUTION: These exhaust products are not legal for sale or use in California on...

Chrome top left heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65710-65

Chrome 8" Lower Y heat shield includes worm clamps. Fits:FL 1970-1984Additional Information OEM No.65565-70A U

Rear heat shield has worm clamps included. Shields have a cutout for crossover pipes. Fits:FL 1970-1984Additional Information OEM No.65563-70

Front heat shield is 26" long with worm clamps included. Fits:FL 1970-1984Additional Information OEM No.65561-70

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Chrome true dual exhaust system features independent exhaust pipes to fit 1970-1984 Shovelhead models with a fishtail kit.True dual exhaust system features completely separate exhaust pipes, heat...

True dual exhaust header set features pipes that function independently.True dual exhaust system features completely separate exhaust pipes. Front and rear pipes function independently. Pipe set...