Touring Electra Glide Highway King FLHFB

23 tooth transmission sprocket. Fits:FL 1941-1985EL 1936-1952Additional Information UOM1 - EA Manufac

23 tooth splined engine sprocket kit includes the spacer, nut and lock tab. Fits:FL 1955-1969Additional Information UOM1 - KIT

lonid engine sprocket kit includes a 23 tooth splined sprocket, nut, lock tab, seal and a .671" long spacer.*NOTE: For use with V-Twin and S&S case sets. Fits:FL 1965-1969Additional Information

Complete chain tensioner kit for 1965-1984 models. Kit includes chain tensioner hardware, nylon pad, primary chain adjuster, nut and anchor plate.*NOTE: This is the original style kit with the...

Zicad plated 16-1/2" foot clutch lever rod with 10/32" NF thread.*NOTE: Threads on the rods and ends are 10/32" N.F. ...

Clutch cable bracket features a zinc finish. Fits:FX 1971-1978FL 1965-1978Additional Information UOM1 - EA

Parkerized 16-1/2" foot clutch lever rod with 10/32" NF thread.*NOTE: Threads on the rods and ends are 10/32" N.F. Fits:FL 1965-1978Additional Information O

Clutch hub roller kit for 3 stud clutch hubs.Kit includes the following: clutch hub roller retainer kit, clutch hub bearing plate spring, clutch hub bearing retainer plate and a clutch hub lining...

Clutch release arm with a zinc finish. Fits:FX 1971-1978FL 1968-1978Additional Information UOM1 - EA

Chain tensioner plate Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

Ball end pushrod adjusting screw. Fits:FX 1971-1984FL 1941-1984Additional Information OEM No.37357-41

4-speed clutch release arm features a zinc plated finish. Fits:FX 1973-1978FL 1968-1978Additional Information UOM1 - EA

Pushrod is 13-1/2" long. Fits:FL 1965-1969Additional Information OEM No.37285-65 UOM1 - EA

10-Hole outer clutch pressure plate with a black finish. Fits:FX 1971-1984UL 1941-1948FL 1941-1984Additional Information OEM No.38010-4

3-Hole outer clutch pressure plate with a black finish. Fits:FX 1971-1984FL 1941-1984Additional Information OEM No.38010-41

Short clutch release arm features a steel zinc plated for Ultima 1.4kw starter kit. Fits:FL 1941-1984Additional Information UOM1 - EA

Rodan clutch ramp assembly mounts in the kick starter cover, which mounts with 3 screws. Assembly includes inner ramp, outer spring, washer and cotter pin.For use on 4-speed kicker starter cover...

Rodan kick cover plug for kick starter cover. Fits:FL 1941-1984Additional Information UOM1 - EA Manufacturer

Rodan clutch cable bushing for kick starter cover. Fits:FL 1941-1984Additional Information UOM1 - EA Manufactu

Rodan outer clutch ramp for kick starter cover. Fits:FL 1941-1984Additional Information UOM1 - EA Manufacturer

Rodan inner clutch ramp. Fits:FL 1941-1984Additional Information UOM1 - EA ManufacturerV-Twin

Clutch release arm features a zinc plated finish and is for use with electric start kits. Fits:FL 1965-1987Additional Information UOM1 - EA

Primary chain drive system is 82 link and features chain shoe adjuster assembly, clutch drum basket with starter ring gear, steel and fiber clutch plates with pressure plate assembly, and 24 tooth...

Kit is for 4-speed models and includes clutch drum, 3 stud clutch hub, 4 steel and 5 fiber plates, springs, outer clutch, releasing disc, and clutch hub nut with lock tab, key, and seal.Clutch drum...

Transmission reverse idler shaft for 3-speed models with reverse. Fits:FL 1941-1978Additional Information OEM No.36158-36

Reverse shift gear. Fits:FL 1952-1979Additional Information OEM No.33960-65 UOM1 - EA

New Old Stock" Coutnershaft reverse gear is for use on 3 speed reverse transmissions only.Reverse gear is to be used on 4-speed models. Fits:FL 1941-1976EL 1936-1952Additional Information

2020 New Production transmission shifter shaft assembly kit includes a shaft finger, lock screw, rollers, seal, bushing, nuts, locks, shims and a spacer.*NOTE: Must order fork separately. Fits:UL...

Kit includes an unpolished black replica kick starter arm, a black FLH "V" kick starter pedal assembly and the mounting hardware. Fits:FL 1954-1984Additional Information

Countershaft cluster gear assembly includes gear rollers and a shaft nut gear.*NOTE: Does not include end plate washers. Honing may be required to fit loose rollers. Fits:FL 1941-1975Additional...

York shifter fork set for 1941-1985 Big Twin 4-speed models.Sold as a pair. Fits:FLH 1941-1985FXE 1971-1985Additional Information UOM1 - S

Kick starter shaft thrust washer is the thinner version of the original with a thickness of .096". Fits:FL 1941-1969Additional Information UOM1 - EA

Kicker pedal assembly is the fudgesicle type with a zinc shaft.Does not include mount hardware, Fits:FL 1941-1980Additional Information UOM1 - KIT<

Kick cover filler plug features an aluminum finish. Fits:FL 1941-1984Additional Information UOM1 - EA Manufact

Bare ratchet top casting features mount for 1.4kw starter. Reainforced at outer mount flange and starter flange. Fits:FL 1952-1978FX 1973-1978Additional Information

Countershaft cluster 3 speed and reverse gear has 15 and 16 teeth. Fits:FL 1939-1976Additional Information OEM No.35286-39

FL 1st gear set includes a 15 x 20 cluster gear and a 26 tooth low gear.For 4 speed models. *NOTE: Must order bushing separately. Fits:FL 1959-1985Additional Information

Transmission countershaft retainer washer is for low or 2nd gear. Washer measures 1.14mm and .045" thick. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Transmission countershaft retainer washer is for low or 2nd gear. Washer measures 1.21mm and .048" thick. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Transmission countershaft retainer washer is for low or 2nd gear. Washer measures 1.27mm and .050" thick. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information