Touring Electra Glide Highway King FLHFB

Chrome brake cable adjuster only for the front. Fits:XL 1952-1972FX 1971-1972FL 1950-1971Additional Information OEM No.45159-50

Black clutch cable features heavy duty construction designed for reliability and longer service. The cables casing length is 48 Fits:FX 1971-1984FL 1968-1984Additional Information <

V-Twin black clutch cable has a casing length of 51.625" and a 58.50" overall length. Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FX 1980-1986Additional Information

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

4 Tooth fine speedometer drive gear featuring a smaller inner diameter than OE.For use with 2:1 ratio speedometer and drive gear. Fits:FL 1962-1968Additional Information

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

Kit includes butterfly type Keihin carburetor assembly, stock intake manifold, spacer kit, clamp set and air cleaner mount kit. Fits:XL 1957-1977FL 1966-1977Additional Information <

Keihin carburetor kit with butterfly type carburetor without air cleaner includes manifold and intake clamps. Fits:FL 1966-1977FX 1973-1977Additional Information

Tillotson idle mixture screw features an adjustable knob and features a zinc finish. Fits:FL 1966-1970Additional Information OEM No.27688-66 <

OKO polished 3/8" NPT hex body petcock with downward facing 5/16 fuel spigot.Does not include 22mm nut. Includes stainless steel screen. Fits:FL 1966-1974XL 1955-1974Additional Information

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on...

Sifton chrome petcock rear facing with 3/8" National Pipe Thread. Features solid brass construction with on/off and reserve positions, screen, and a 3/8" fitting. Fits:FX 1971-1974XL 1955-1974FL...

Black petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29

Black Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Replica cadmium intake manifold clamp set features fillister head screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No

Intake manifold clamp update kit is used to update early intakes to late style seals or when intake flanges are damaged on early heads. Kit includes manifold rings, silicone seals, and stainless...

Intake manifold adapter ring set is used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Set includes four standard and two stroker rings. Fits:FX...

Stainlees steel power intake clamp set features a "floating bridge." Clamps close the gap under the "T" bolt for total 360  wrap around seal. This set has O-ring seals*NOTE: Includes USA made clamps...

Intake manifold adapter rings for stroker .200 taller cylind ers are used to update early style O-ring intake manifolds a nd cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL...

Intake manifold adapter rings for stock cylinders are used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL 1957-1977FL...

Polished stainless steel intake manifold clamp set features clamps constructed from a strong, light weight material that is very flexible and easy to install! Includes o-ring style seals.Clamp set...

Chrome petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Chrome Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information