Touring Electra Glide Highway King FLHFB

Chrome 2 bolt license plate bracket for fender mounting. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information OEM No.59995-5

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Chrome starter motor bracket fits Prestolite electric starter motor. Fits:FL 1966-1981Additional Information OEM No.31476-66

Black ignition coil mount kit includes the outer strip. These stock style brackets mount to existing studs and include nuts, screws, and washers to mount coil.Order separately studs to mount bracket...

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA<

Top engine mount replaces stock type and features a chrome finish.Mount does include choke mount for lever assembly. Fits:FX 1971-1972FL 1967-1984Additional Information

Seat T rear strap with radius corners features a raw finish. Fits:FL 1941-1980Additional Information UOM1 - EA

V-Twin - 31-0076 - Rear Seat T BracketDescriptionRear seat T bracket features a black finish. Allows police deluxe solo seat to be mounted on 2009-up FLT police bikes and 2021-up Highway King. For...

Chrome left vertical heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65707-77

V-Twin - 30-3187 - 1967 Replica Turn Out Muffler SetDescription1967 Replica chrome turn out muffler set features a seamless body design. Muffler is the exact replacement for 1967-1969 FL models...

Raw 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Chrome 15-1/4" megaphone tip features a round end with a 1-3/4" inlet. This is the tip only.Baffles and clamps not included. Fits:FL 1958-1984Additional Information

Chrome 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Bronx FL muffler tip kit includes chrome 24" muffler set. Set features two Bronx tips that fit on 1-7/8" outer diameter end. The inlet measures 1-3/4".For right or left side dual FLH muffler...

Chrome 15-1/4" megaphone tip set has a 1-7/8" inlet to fit over OE style cigar mufflers. Features a round end.Set of two. Baffles and clamps not included. For use with stock OEM style cigar mufflers...

Black front cylinder header pipe is for Shovelheads. Fits:FL 1966-1969Additional Information OEM No.65443-66 U

Rear head shield kit includes a rear pipe shield and y-pipe piece in chrome.*NOTE: Worm clamps included for installation. Fits:FL 1965-1969Additional Information

Short heat shield is to fit over 1-3/4" exhaust pipes. Fits:FL 1958-1984Additional Information UOM1 - EA Measu

Muffler includes one megaphone tip with heavy duty 1-7/8" clamp installed. Fits:FL 1958-1984Additional Information UOM1 - EA

Black combo exhaust connector pipe has bracket riveted in place as original, and includes 1-3/4" inside diameter "Y" connector.*NOTE: Flat (squash) pipe may require hand fitting. Edge of pipe may...

Chrome 31" muffler kit for use with dual exhaust. Muffler is 31" long with upsweep design. Inlet end fits 1-3/4" outer diameter pipes. Muffler set includes 1-7/8" clamp set, and 3" hanger clamps...

Kit includes two 22" FLH full chrome mufflers and two 15" long megaphone tips with heavy duty 1-7/8" clamps.For use with right and left side dual exhaust! ...

Chrome finish rear heat shield for 2:1 exhaust systems on Shovelheads and Panheads. Does not have the cut out for the crossover pipe.Includes two worm clamps. Heat shield includes 2 worm drive clamps...

Chrome muffler kit includes a single 22" muffler with 15" megaphone muffler tip and one 1-7/8" clamp.For one side. Fits:FL 1958-1984Additional Information U

Replica tubing set is chrome with a 1-7/8" inner diameter. This bendable slinky type tubing fits over 1-3/4" pipes. Constructed of steel.Set includes one 10" cover and one 11-1/2" cover. Sold in a...

Rear chrome heat shield has worm clamps included. Shield has a cutout for crossover pipes. Fits:FL 1965-1969Additional Information OEM No.65560-65A<

Chrome top left heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65710-65

Panhead rear crossover exhaust pipe features a chrome finish . For use with crossover exhaust systems when used with a rear header pipe with crossover junction.**CAUTION: These exhaust products are...

Chrome rear exhaust pipe for Big Twins with crossovers fits stock systems only.Exhaust pipe will work with kick starter models. **CAUTION: These exhaust products are not...

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Replica chrome dual crossover system without mufflers features inter section of left side crossover at rear pipe.System is for 1966-69 Shovelheads and is for kick or electric start. Four piece system...

2 into 1 exhaust header set is for rigid or swingarm frames on 1966-1969. It is a three piece set incorporating the Y flat pipe combination.Set needs to be powder coated. *Note: UPS may consider this...

Chrome 2 into 1 exhaust header is for rigid or swingarm frames on 1966-1969 models. Header comes as a three piece set incorporating the Y flat pipe combination.*Note: UPS may consider this part as...

Shovelhead front and rear upsweep header pipe set featrues a chrome finish and will accept straight fishtail extensions or mufflers.2 piece header set is for rigid frame installation with nose cone...

Chrome upsweep rear exhaust header for Shovelhead motors in a rigid frames.The channel mount is on the rear side of the header pipes, to attach to the frame with "T" bolts. For use with upsweep...

Shovelhead rigid upsweep exhaust 4 piece header set features a chrome finish. Includes a front upsweep extension header, upswwep rear exhaust header pipe, flat "squash" pipe, and a front cylinder...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information