Touring Electra Glide Police FLHTP

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

Pull adjuster only. Fits:FX 1985-1985FX 1973-1984FL 1973-1984FL 1985-1985Additional Information UOM1 - SET

Assembly includes 2 of each bearing, race, seal and one seal spacer.Order snap rings, seal washer and internal bearing spacers separately. Fits:FLT 1984-1999 steel hub, wire wheelFXST 1986-1999 steel...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...

Rear wheel hub bearing race and seal kit includes two each of bearing, race, and proper seals. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearXL 1979-1999 RearFX...

Front wheel bearing race and seal kit includes 2 each of the bearing, race and seals. Fits:FXD 1991-1999 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST 1986-1999...

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Zinc plated .750 rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle.The axle features a 3/4" outer diameter with a...

3/4" axle with hex head and threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 1980-1999FLST 1986-2006FXST 1984-2006FXR...

Axle with threaded end has a 10-5/8" bearing surface length and can be used to replace a worn out or damaged axle.For use on 41mm forks. Order nut kit separately. Fits:FXDWG 1993-2005FXST...

Axle with threaded end and a 10-5/8" bearing surface length can be used to replace a worn out or damaged axle.Order nut kit separately. Fits:FL 1981-1985Additional Information

Swingarm bushing set includes two of each: mount bushing rubbers, tolerance rings and retaining rings.Sold as a 6 piece set. Fits:FLT 1980-2001FXR 1983-1994Additional Information

Chrome engine dress up kit includes chrome parts and hardware for installation.Kit requires removal of engine to install the rocker box covers. This kit includes chrome rocker box cover set,...

Chrome 5-speed outer primary cover kit includes primary cover, allen screws, outer cover starter bearing, and gaskets for derby, inspection and outer cover.*Note: UPS may consider this part as...

Chrome outer primary cover kit is for 1985-1988 FLT models.Order inspection cover separately, drain plug is not included. ...

Black 5-speed outer primary cover is made from new die cast tooling to replace stock parts.*NOTE: Must order gaskets, starter bearing and screw kit separately. Fits:FXR 1985-1988FLT...

Chrome outer primary derby cover features engraved early syle bird logo.Order gasket and screws separately. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR 1985-1994FXD 1991-1998FLST...

3 hole derby cover features a chrome finish with a gold inlay Eagle Spirit design.Order gaskets and screws separately. Screws not included. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR...

Chrome billet raised iron cross primary derby cover with 3 holes.Order gasket and screws separately. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR 1985-1994FXD 1991-1998FLST...

Engine skid plate features narrow width ribs as exact original for 1936-39. The correct shape! Fits:FL 1941-1999FX 1970-1999EL 1936-1952Additional Information

V-Twin - 42-2025 - 3-Hole Derby Cover ChromeDescriptionChrome steel with black mesh 3 hole outer primary derby cover.*NOTE: It's closed behind the mesh. Fits:FL 1970-1984FXR 1984-1984FX 1971-1984FXST...

Finned derby cover features a powder coated polished finish.Order gasket and screws separately. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXR 1985-1994FXD 1991-1998FLST...

Description Finned derby cover features a powder coated chrome finish.Order gasket and screws separately. Fits: FL 1970-1984 FXST 1984-1998 FLT 1979-1998 FX 1971-1984 FXR 1985-1994 FXD...

Horn cover with a black finish for high note horns. Fits:FL 1976-1984FLT 1984-1990FXST 1984-1990XL 1965-1978FX 1976-1984Additional Information

Chrome air flow ignition system cover. Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST 1986-1998Additional Information

Vented V-Twin derby and inspection cover kit.Kit is chrome plated. Kit is vented and for drive belt only. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1984FXR 1987-1994FX 1971-1984FXD 1991-1998FLT...

Billet vented derby and inspection cover kit.Kit is vented and for drive belt only. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1984FXR 1987-1994FX 1971-1984FXD 1991-1998FLT 1985-1998FLST...

Steel alternator type inner primary cover allows use of 1955-1964 type compensator outer covers on alternator, electric start must be sacrificed. Features a black finish. Fits:FL 1970-1985...

V-Twin - 42-1201 - Skull Ignition System Cover 2-Hole BlackDescriptionIgnition points cover is the horizontal 2-hole style featuring a black finish with a skull design. Fits:FL 1970-1984FXST...

V-Twin - 42-1200 - Skull Ignition System Cover 2-Hole ChromeDescriptionIgnition points cover is the horizontal 2-hole style featuring a chrome finish with a skull design. Fits:FL 1970-1984FXST...

V2 ignition system cover features an alloy construction with a bright silver finish. For use with Evolution and Big Twin models.The holes in the cover are vertical. Held in place by rivets or screws,...

Grooved 3-hole derby cover features cast aluminum construction and a black finish with chrome highlights. Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX 1971-1984FXD 1991-1998FXR 1984-1994FLST...

Black grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1 -

Chrome grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1

Grooved 3-hole derby cover features cast aluminum construction and a chrome finish.The distance between the holes center to center measures 4-7/8". Fits:FL 1970-1984FXST 1984-1998FLT 1979-1998FX...

V-Twin - 42-1125 - Black 2-Hole Perforated Ignition System CoverDescriptionBlack 2-hole perforated ignition system cover can be mounted vertically or horizontally. Fits:FL 1970-1984FXST 1984-1998FXR...

V-Twin - 42-1116 - Black Smooth Domed Ignition System CoverDescriptionDomed ignition system cover has a smooth black finish. Cover will mount either vertically or horizontally. Fits:FL 1970-1984FXST...