Touring Electra Glide Ultra Classic FLHTCU

Tour-pak latch kit. Fits:FLTRU 1987-2013FLT 1987-2013FLHT 1987-2013Additional Information UOM1 - KIT

V-Twin - 49-1283 - Tour-Pak Tether Cable KitDescriptionTour-Pak tether cable kit. Fits:FLT 1991-UPAdditional Information UOM

Saddlebag hardware kit includes small clips, hinges, face plates, and key-lock set for both bags.All saddlebags and lids are constructed of FRP, fiberglass reinforced plastic, readyy for primer and...

Saddlebag latch cover set features chrome face plates with black flame design inserts. Fits:FLT 1993-2013Additional Information OEM No.90690-04A

Saddlebag lock and key kit features a chrome finish. Fits:FLTR 1993-2013FLHR 1993-2013FLHTC 1993-2013FLHT 1993-2013FLHX 1993-2013Additional Information

Saddle bag lock and key kit includes 2 keys and 2 locks.All saddlebags and lids are constructed of FRP, reinforced plastic, readyy for primer and paint. FRP is made up of polyphenylene...

Saddlebag hardware kit includes all necessary tethers, hardware, seals, and hinges.*NOTE: Must order locks and face plates separately. Comprehensive saddlebag lid latch kits are great for aftermarket...

V-Twin - 49-0887 - Saddlebag Top StrapsDescriptionTop straps for saddlebag. Includes 8 screws.Includes qty 4 pieces 12-16x5/8" self tapping screws (OEM #3596) and 4 pieces 8-32x1/2" stainless truss...

V-Twin - 49-0886 - Saddlebag Lid Wear PlatesDescriptionStainless steel wear plates are for the saddlebag lid. Plates come in a set of four, and require installation with adhesive. Fits:FLT...

V-Twin - 49-0885 - Saddlebag Reinforcing Lid Back Plate SetDescriptionNew Old Stock" Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set.*NOTE: No...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent.Reflector set not included. Plate set is OE style die cast and chrome. They will accept reflector set or flame...

V-Twin - 49-0882 - Original Style Saddlebag Latch SetDescriptionSet includes four plastic rub bars installed and right and left side latches for saddlebag.Order screws and hardware separately...

Set includes four bail head studs, four washers, four grommets, four receptacles, and four mounts for the left and right side for mounting saddlebags.Does not include the lid hardware or latch plates...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set.. Fits:FLT 1993-2013Additional Information

Hardware kit is for the saddlebag lids.Hardware lid kit does not include locks or face plates. Fits:FLT 1993-2013Additional Information OEM No.9092

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Front trim style speaker grill set features a chrome finish with a cross bar design.Sold as a set of 2. Fits:FLT 1996-2013Additional Information UOM

Saddle bag lock and key kit includes 2 key and 2 locks.Kit includes 2 x 90682-93 Cam Hooks and 2 x 7586 Jam Nuts 9/32-28 x 1/4. Fits:FLT 1993-2013FLHT 1993-2013Additional Information

Saddlebag Lock and key kit includes 2 locks and 2 keys, 2 cam hooks, 2 9/32 x 28 x 1/4 jam nuts, 2 8# x 32 x 3/8 screws, and right and left side plastic rub bars. Each lock is keyed different.All...

Saddlebag liner kit for stretched saddlebags features felt material.Customer may opt to use velcro strips to better secure liners inside of saddlebags. (Velcro not included.) Fits:FLT...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Saddlebag lid set includes right and left side lids with speaker cutout. Lids are plastic with a primed finish, ready for paint.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for...

Saddlebag hardware set includes saddlebag backing plate set, stud and hardware kit, top straps, two saddlebag gaskets, and four lower rubber bumpers.Hardware set does not include locks or latch set. ...

Saddlebag hardware kit with left and right latch assembly set, includes bail head studs.Kit includes Touring pack hardware, OE saddlebag hardware, saddlebag lid wear plates, reinforcing lid back...

V-Twin - 49-0000 - Saddlebag LED Lamp KitDescriptionSaddlebag lamp kit includes a set of red LED lamps with red lens and the Touring electrical connection update kit.Harness included. *NOTE: Does not...

Flame insert set for Touring saddlebag latch covers replace reflectors.Will replace reflectors on stock latch covers. Order latch covers separately. Face plate is metal and includes an adhesive strip...

V-Twin - 47-1941 - Driver Backrest Pad BlackDescriptionDriver backrest pad is covered in black vinyl for Touring models. Fits:FLT 1997-UPAdditional Information <

V-Twin - 45-0819 - Nickel Plated 16 inch Spoke SetDescriptionFront or rear spoke set features (40) 16" nickel plated spokes and nipples. Spokes are easy to clean and maintain. Spoke set include...

V-Twin - 45-0409 - Polished Stainless Steel 16 inch Spoke SetDescriptionPolished stainless steel spoke set features 40 short shank spokes and spoke nipples.The spokes are easy to clean and maintain...

V-Twin - 45-0384 - 16 inch Wire Wheel Cover SetDescription16" wire wheel cover set is for spoked front and rear wheels with alloy hubs. Set includes 2 chrome cover with 4.1" round holes.Covers have...

Chrome front wheel hub includes installed 1" sealed bearings and bearing spacer. Fits:FLT 2000-2007 Dual DiscAdditional Information OEM No.40988-00<

V-Twin - 45-0333 - Chrome Rear Wheel Hub 1 inch BearingsDescriptionIncludes sealed 1" bearings and inner tube spacer.Alloy rear hubs has 7/16-14 pulley mount threaded hole and a 3/8-16 brake disc...

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2054 - Swingarm Pivot ShaftDescriptionSwingarm pivot shaft only, without hardware. Fits:FLT 2002-2010Additional Information

V-Twin - 44-1977 - Rear Axle Spacer Set 1 inch Inner DiameterDescriptionChrome rear axle spacer set fits Touring models with a 1" axle. This set has an inner diameter of 1".One spacer has an length...

Replica front or rear wheel hub 1" bearing kit. For use with non-ABS models. Fits:FLT 2000-2007Additional Information OEM No.43517-00

These are replacement nuts for the swingarm pivot pin. Fits:FLT 2002-2008Additional Information OEM No.47606-02

V-Twin - 44-0883 - Swingarm Bearing SetDescriptionSwingarm bearing set.*NOTE: Replace OEM bearings with stock components. Fits:FLT 2002-UPAdditional Information

Swingarm cup washer set. Fits:FLT 2002-2010Additional Information OEM No.47491-02 UOM1 - SET

V-Twin - 44-0858 - Wheel Hub Bearing Tube Spacer 1 inch Inner DiameterDescriptionFront or rear wheel hub bearing tube spacer with an inner diameter of 1". Fits:XL 2005-UPFLT 2002-UP Front and...