Touring Street Glide FLHX

Saddlebag set features a black finish with round hole cutouts for the lock on the lids.Bags will accept OE or V-Twin lids and related hardware, available separately. The process of injection creates...

Black saddlebag lid kit for the right and left side includes FRP lids, gasket kit, and hardware kit.Pre-drilled and pre-fit for ease of installation. The process of injection created smooth inside...

Left side black plastic saddlebag lid with round hole cutout for the lock.Lid is pre-drilled and pre-fit for ease of installation. The surface is not "finished", must be primed and painted. *NOTE:...

Right side black plastic saddlebag lid with round hole cutout for the lock.Lid is pre-drilled and pre-fit for ease of installation. The surface is not "finished", must be primed and painted. *NOTE:...

Saddlebag hinge kit includes hook, and rivets for both right and left side.All saddlebags and lids are constructed of FRP, reinforced plastic, readyy for primer and paint. FRP is made up of...

V-Twin - 49-1993 - Side Car Mount KitDescriptionSide car connector kit.*NOTE: Some components may be NOS, "New Old Stock", and may have "shelf" wear, scratches or discoloration. Please finish to suit...

V-Twin - 49-1989 - Front Lower Side Car Clamp SetDescriptionSide Valve lower front bracket set is the clamp on style.U-clamp not included. Requires four U-Bolts for mouting. *NOTE: Order U-Bolts...

Black heavy duty construction is 15% thicker than stock for added support to prevent breakage.Mounts with stock hardware. ...

Tour-pack lock hook set.Sold as a pair. Fits:FL 1984-1992Additional Information OEM No.53194-07 UOM

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Saddlebag lock set comes with 2 keys.*NOTE: Hooks included as shown. Fits:FLT 1985-1992Additional Information OEM No.53587-85

Saddlebag bottom set for the right and left sides.Locks and hinges not included. Bags will accept OE or V-Twin lids and related hardware, available separately. All pieces are constructed of black...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

40 spoke extra wide offset dual flage rear hub features a chrome finish. The drive side is offset 0.875" further out than standard 1973-1985 style hubs. Includes 3/4" bearings, races, seals and seal...

Chrome front wheel hub includes 3/4" bearings installed, races, seals and seal spacers. Fits:FLT 1984-1999Additional Information OEM No.43404-87

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2044 - Swingarm Rebuild KitDescriptionKit includes two bushing assemblies, spacers, plastic retainer rings, plastic dust covers, rubber isolators, and one pivot shaft with lock nut and...

V-Twin - 44-2039 - Swingarm Retaining Ring PlasticDescriptionPlastic swingarm retaining ring. Fits:FXR 1987-1994FLT 1980-2001Additional Information

V-Twin - 44-2029 - Wheel Hub Bearing Shim .008 ThickDescriptionWheel hub bearing shim is .008 thick. Fits:FLT 1982-1999Additional Information

V-Twin - 44-2027 - Front Wheel Hub Bearing Shim .032 ThickDescriptionWheel hub bearing shim is .032 thick. Fits:FXR 1982-1994FLT 1979-1999Additional Information

V-Twin - 44-2026 - Wheel Hub Bearing Tube SpacerDescriptionWheel hub bearing tube spacer. Fits:FLT 1982-1999Additional Information

V-Twin - 44-1984 - Swingarm Pivot ShaftDescriptionSwingarm pivot shaft only measures 12" x 5/8". Fits:FXR 1982-1988FLT 1982-1988Additional Information <

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

Pull adjuster only. Fits:FX 1985-1985FX 1973-1984FL 1973-1984FL 1985-1985Additional Information UOM1 - SET

Assembly includes 2 of each bearing, race, seal and one seal spacer.Order snap rings, seal washer and internal bearing spacers separately. Fits:FLT 1984-1999 steel hub, wire wheelFXST 1986-1999 steel...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...

Rear wheel hub bearing race and seal kit includes two each of bearing, race, and proper seals. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearXL 1979-1999 RearFX...

Front wheel bearing race and seal kit includes 2 each of the bearing, race and seals. Fits:FXD 1991-1999 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST 1986-1999...

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Zinc plated .750 rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle.The axle features a 3/4" outer diameter with a...

3/4" axle with hex head and threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 1980-1999FLST 1986-2006FXST 1984-2006FXR...

Axle with threaded end has a 10-5/8" bearing surface length and can be used to replace a worn out or damaged axle.For use on 41mm forks. Order nut kit separately. Fits:FXDWG 1993-2005FXST...

Axle with threaded end and a 10-5/8" bearing surface length can be used to replace a worn out or damaged axle.Order nut kit separately. Fits:FL 1981-1985Additional Information

Swingarm bushing set includes two of each: mount bushing rubbers, tolerance rings and retaining rings.Sold as a 6 piece set. Fits:FLT 1980-2001FXR 1983-1994Additional Information

Chrome engine dress up kit includes chrome parts and hardware for installation.Kit requires removal of engine to install the rocker box covers. This kit includes chrome rocker box cover set,...

Chrome 5-speed outer primary cover kit includes primary cover, allen screws, outer cover starter bearing, and gaskets for derby, inspection and outer cover.*Note: UPS may consider this part as...

Chrome outer primary cover kit is for 1985-1988 FLT models.Order inspection cover separately, drain plug is not included. ...