Sportster XLCH 900 Kick Start

Straight barbed oil line fitting is for 3/8" hose.Nut measures 7/16". Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL 1968-1984Additional Information

Deluxe 1-1/2" liquid filled oil gauge features a sealed lens with chrome rim and stainless steel case.The liquid filled face eliminates needle bouncing giving a constant reading. Includes necessary...

Nugget oil gauge fitting only for 1957-1970 has 5/6"-24 thread. Fits:FL 1966-1970XL 1957-1970Additional Information UOM1 - EA

This Pura Flow oil filter kit includes left side motor mount plate, chrome filter and 3/8" x 5 foot hose with 1/4" clamps. Fits:XLH 1957-1977XLCH 1957-1977Additional Information

Single gauge kit with a chrome early type housing features a GPS signaled speedometer and coil triggered tachometer.The chrome bracket mounts to the handlebar riser clamp. *NOTE: Must order red...

Kit includes chrome single gauge mount, with combo 85mm 0-120 mph GPS signaled speedometer and electronic tachometer, which is triggered by the coil.Gauge is attached to housing by nylon guard nut on...

85mm gauge bracket features a chrome finish. Fits:FL 1960-1972XL 1957-1972Additional Information UOM1 - EA

85mm signaled speedometer GPS includes chrome gauge bracket and black speedometer gauge with stainless steel bezel and red needle. Fits:FL 1960-1972XL 1957-1972Additional Information

Kit includes a 85mm GPS speedometer and a chrome bracket. Speedometer gauge reads 0-120 mph.The chrome bracket mounts to the handlebar riser clamp. Kit includes red generator and blue hi-beam...

Kit includes 85mm GPS electric tachometer and a chrome bracket. Tachometer is 12 volt and operates from a coil impulse.The chrome bracket mounts to the handlebar riser clamp. Kit includes red...

Deco 48mm speedometer kit has a ratio of 2:1, and features a white face with black numbers reading 0-110 mph.Includes gauge, bracket, rubber handlebar clamps, and proper cable which can be installed...

Magneto tachometer kit includes mount bracket to mount to XL handlebar mount.Tachometer is OEM HD, manufactured in Italy. Fits:XL 1957-1970Additional Information

Set of weld on mounts for models with stock mounting holes features a raw steel construction. Fits:XL 1957-1978Additional Information UOM1 - SET

Gas tank has a left side petcock opening, and a fuel capacity of 3.2 gallons.Kit features dual cap type tank with a smooth top and includes mount bracket and necessary hardware for installation...

Gas tank is dual cap style with a left side petcock location, and a fuel capacity of 3.2 gallons.Kit has a one piece tank that will bolt to existing mounting holes. Includes three light dash cover...

Gas tank mount rear spacer. Fits:XL 1952-1981Additional Information OEM No.61135-57 UOM5 - PK

Front motor mount biter washer. Fits:XL 1952-1984Additional Information OEM No.16218-52 UOM5 - PK

Forged end kickstand pin. Fits:XL 1952-1983Additional Information UOM1 - EA FinishZinc

V-Twin - 37-9079 - Skull Pushrod Cover Cup Set GoldDescriptionGold plated skull pushrod cover cup set.Sold as a 4 piece set. *NOTE Gold plate is very delicate. Do not Polish. *No warranty or returns...

Boot vent screws for 1954-1970 XLH and XLCH.Sold as a pair. Fits:XL 1954-1970Additional Information OEM No.46020-57

Upper fork boot retainer setSold as a pair. Fits:KH 1954-1956XLH 1957-1970XLCH 1957-1970Additional Information OEM No.46007-54A

Front fork hardware kit includes gaskets, felts, retainers, washers, vent tubes and clamps.Kit does not include boots, order separately. Fits:XL 1954-1970Additional Information

Chrome die cast spark plug cover fits perfectly on a spark h ex for Big Twin 14mm pre 1999 models. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL...

V-Twin - 37-8881 - Riser Cup Washer ChromeDescriptionChrome riser cup washer Fits:FXST 1984-UPFXR 1982-1994FXD 1991-2017FX 1973-1984XL 1962-UPAdditional Information

Kit includes nut, tapered spacer, lock washer, and chrome cap plug. Fits:FXR 1982-1988FX 1971-1984XL 1954-1988Additional Information UOM

Swivel tapered headlamp washers Fits:XL 1959-1995FX 1971-1984Additional Information OEM No.67815-59A

Horn cover mount hardware includes 3 screws, 3 lock washers, 3 nuts, 1 speed nut and 1 spacer. Used to mount FX and FL horns. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST...

Drain plug is 1/8" National Pipe Thread, and can be used on a variety of applications.Plug can be used on lower fork sliders for FLH models and rocker arm covers, crank case, gear case, and oil pump...

Stainless steel exhaust header clamp bolt. Fits:XL 1957-1985FL 1948-1965Additional Information UOM1 - KIT

Brake rod adjuster nut Fits:XL 1957-1978K 1952-1956Additional Information OEM No.42264-52 UOM

V-Twin - 37-2096 - Phillips Head Chrome ScrewsDescriptionChrome 5/16"-24 phillips head screws for air cleaner and luggage rack applications. Fits:FXST 1984-1989FX 1971-1984WL 1941-1952UL 1941-1948FL...

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Magneto mount plate kit includes breaker arm contact screw and washer.Use with 1965-70 XL mount plate and advance arm mechanism. Fits:XL 1965-1970Additional Information

Domed fork stem nut with a chrome finish. Fits:XL 1952-1977Additional Information UOM1 - EA Manufacturer<

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

Stock single slot primary cover filler and clutch hole cap are easily installed and removaled with a standard 15/16" wrench. These are sold each and two are required. Fits:XL 1952-1970Additional...

Stock single slot primary cover filler and clutch hole caps are easily installed and removed with a standard 15/16" wrench. These are sold each and two are required. Fits:XL 1952-1970Additional...

#58 magnetic 1/4"-20 set screw for Fairbanks Morse models. Fits:XL 1955-1970Additional Information UOM1 - PK M

Zinc spacer for switch mount kit. Fits:XLCH 1958-1969Additional Information UOM5 - PK FinishZinc

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has a length of 46". Fits:XL 1957-1970Additional Information OEM No.67051-52A