Sportster XLH 900 Electric Start

XLCH Magneto advance assembly includes all necessary pieces to have a cable operated advance on XL-WL magnetos. Fits:XL 1957-1970Additional Information UOM

XLH battery cable set for electric start models.Sold as a set of 3, which includes one 8-1/2" braided flat unsheathed battery cable and two 15-1/2" black positive battery cables. Fits:XLH...

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the...

XLH battery cable set includes a black positive/negetive 15-1/2" cable and a braided flat negative 9-1/2" cable.Sold as a set of 2. Fits:XLH 1967-1978Additional Information

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

Battery cable is braided, flat, and unsheathed ground strap.Fits negative terminal on battery. Fits:XLH 1967-1972Additional Information OEM No.7023

Battery cable for negative post. Cable is flat, braided, unsheathed and a 4 gauge with 17/64" and 11/32" hole sizes on heat shielded terminal ends. Fits:XLH 1967-1972Additional Information <

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

Steel fork boot retainer washer for XL models.Sold in a quantity of 2. Fits:XL 1957-1970Additional Information OEM No.46010-54

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

Includes seat plunger kit, seat "T", and pivot bolt. Fits:XL 1954-1970Additional Information UOM1 - KIT Manufa

V-Twin - 31-4057 - Exhaust Bracket ChromeDescriptionChrome exhaust bracket is for mounting drag pipes on mufflers with the use of T bolts.Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65

Distributor breaker hold down clamp. Fits:XL 1952-1970WL 1936-1973Additional Information OEM No.32515-66

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is...

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

Chrome front clamp pipe with angle.Clamp has an inner diameter of 1-3/4". Fits:XL 1958-1978Additional Information OEM No.65514-58

V-Twin - 31-1966 - Linkert Carburetor Mount Bracket Zinc PlatedDescriptionLinkert carburetor mount bracket features a zinc plated finish. Fits:XL 1957-1972Additional Information

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

Stainless steel XL muffler clamp features an inner diameter of 1-7/8" and a reinforced clamp pad area. Clamp features reinforcing pad spot that is welded in place for extra clamping power!*NOTE:...

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA<

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Black battery tray support carrier bracket. Battery tray mount, available separately. Fits:XLH 1967-1978Additional Information OEM No.66480-67

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E

Chrome seat spring support bar Fits:XL 1957-1978Additional Information UOM1 - EA Measurements

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Zinc carburetor cable bracket Fits:XL 1966-1971Additional Information OEM No.27449-66 UOM1 - EA<

Stainless steel exhaust header clamp set.Sold in a quantity of 2. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.65519-52<

Saddlebag bracket set chrome are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1952-1978Additional...

Solid State regulator mount bolts directly to 2-brush generator housings on Big Twin and Sportster models.Regulator mount fits Accel and V-Twin finned type regulators. Fits:XL 1958-1978FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information