Sportster XLH 900 Electric Start

Brake rod adjuster nut Fits:XL 1957-1978K 1952-1956Additional Information OEM No.42264-52 UOM

XL starter screw is stainless steel, round head and slotted that measures 1-64 x 1/4". Fits:XL 1967-1980Additional Information UOM10 - PK

V-Twin - 37-2096 - Phillips Head Chrome ScrewsDescriptionChrome 5/16"-24 phillips head screws for air cleaner and luggage rack applications. Fits:FXST 1984-1989FX 1971-1984WL 1941-1952UL 1941-1948FL...

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Magneto mount plate kit includes breaker arm contact screw and washer.Use with 1965-70 XL mount plate and advance arm mechanism. Fits:XL 1965-1970Additional Information

Oil tank mount kit. Fits:XLH 1967-1978Additional Information UOM1 - KIT ManufacturerV-Twin

Domed fork stem nut with a chrome finish. Fits:XL 1952-1977Additional Information UOM1 - EA Manufacturer<

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

Stock single slot primary cover filler and clutch hole cap are easily installed and removaled with a standard 15/16" wrench. These are sold each and two are required. Fits:XL 1952-1970Additional...

Stock single slot primary cover filler and clutch hole caps are easily installed and removed with a standard 15/16" wrench. These are sold each and two are required. Fits:XL 1952-1970Additional...

#58 magnetic 1/4"-20 set screw for Fairbanks Morse models. Fits:XL 1955-1970Additional Information UOM1 - PK M

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has a length of 46". Fits:XL 1957-1970Additional Information OEM No.67051-52A

Cable kit is for one side with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Black transmission drive speedometer cable with 16mm top nut . This cable has a length of 45.25". Fits:KH 1954-1956XLH 1957-1972Additional Information OE

Carburetor choke cable assembly includes knob, casing and inner wire.Set of four. Fits:XL 1967-1970FL 1967-1970Additional Information UOM1

Carburetor choke tube only. Fits:XL 1967-1970FL 1967-1970Additional Information OEM No.29220-67 UOM

Black tachometer cable for mechanical tachometer features a 16mm top nut.For use on 1965-1969 Sportster models with a magneto ignition. ...

Replica outer throttle and spark control cable is 42" long and features a vinyl casing. Cable is a cone braided type multi-strand wire. May be shortened for specific applications.Cable is...

Kit includes the magneto tachometer cable driven gear and a 29-1/2" magneto black tachometer cable.Includes a 16mm top nut. Fits:XL 1962-1970Additional Information

Stainless steel braided clutch cable features heavy duty construction designed for reliability and longer service. This cable has a casing length of 51" and an overall length of 60.375". Fits:XL...

Cable kit is for two sides with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Chrome brake cable adjuster only for the front. Fits:XL 1952-1972FX 1971-1972FL 1950-1971Additional Information OEM No.45159-50

Black clutch cable features a heavy duty construction designed for reliability and longer service. The 55" long cable is 4" over stock. Fits:XL 1952-1970Additional Information

Replica clutch cable with adjuster, 51" casing, overall length 59-1/2".*NOTE: Requires 7/16" hole in the lever to mount stock cable adjuster, which is included with the cable. Fits:XL...

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

Kit includes butterfly type Keihin carburetor assembly, stock intake manifold, spacer kit, clamp set and air cleaner mount kit. Fits:XL 1957-1977FL 1966-1977Additional Information <

XL Keihin carburetor kit. Fits:XL 1957-1977Additional Information UOM1 - KIT ManufacturerV-Twin<

OKO polished 3/8" NPT hex body petcock with downward facing 5/16 fuel spigot.Does not include 22mm nut. Includes stainless steel screen. Fits:FL 1966-1974XL 1955-1974Additional Information

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on...