Sportster XLH 900 Electric Start

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal...

Sifton - 1/4" NPT Brass Petcock Sifton petcock with 1/4" National Pipe Thread accepts 5/16" fuel line. Knurled knob turns on-off. Does not include reserve feature. Petcock accepts 1/4 or 5/16" fuel...

Colony - 2665-18 Cadmium Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #8881-18) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts,...

Colony - 2373-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models (OEM #45756-59) - Flat Top Features: Made in the U.S.A. Fitment

V-Twin - Replica Exhaust Header Pipe fits '57-'68 Sportster Model Replica chrome header pipe feature a 2 into 1 design. This pipe is one piece Fitment: XL 1957-1968

V-Twin - Black Oval Air Cleaner Insert fits '66-'75 XLH/XLCH, '67-'75 FLH/FL Models (OEM #29205-69) Oval air cleaner insert features alloy fins on a black background. Fitment: XLH 1966-1975 FX...

Colony - Cylinder Base XLR Type Nut fits '57-'84 Sportster Models Features: For use on specific applications Made in the U.S.A. Fit

Colony - Acorn Cylinder Base Hardware Kit fits '57-'85 Sportster Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A.

Colony - Head Bolt Kit fits '57-'72 Sportster Models (OEM #4714W) Features: Hardened to OEM specifications to prevent stretching Made in the U.S.A.

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts,...

Colony - 9899-1 Cadmium Spring Stud Starter fits '52-'70 Sportster Models (OEM #33088-52) Features: Quality reproduction of the original part Made in the U.S.A.

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1952-1978 Replaces Harley-Davidson part number 61006-57. Description: Replica gas tank has a right side petcock location, and fuel capacity of 3.5...

Colony - 2144-1 Aluminum Primary Cover Filler Caps fits '54-'70 Sportster Models (OEM #34742-52A) Features Chrome or raw aluminum finish Made in the U.S.A. Fitment

HardDrive 4-Speed Shocks: Replacement shocks for Sportsters Chrome Finish 14.5" Fitment: '54-'78 XL Models

HardDrive - 4-Speed Shocks 13.5" - fits '58-'72 FL, '54-'74 XL Features Replacement shocks for FL and XL models Chrome finish Available w/ short cover or full cover 13...

The H2 Bars look good on everything!  Features 1-inch O.D. x 0.120 wall seamless 4130 chromoly tubing with precision mitered and TIG welded joints. Threaded bungs on vertical uprights are...

Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits 1957-1978 XL models. Measures...

Chrome 16" sissy bar kit includes a 16" round bar and non-detachable side plates.Bar height is measured from the first bend to top. Fits: XL 1957-1978 Additional Information

Pull type throttle spiral is for Spring Fork front ends. It reverses direction on 1954-73 throttles.*NOTE: Use the "pull" type handbar spirals to use braided pull type cables. Use the same outer...

V-Twin - 49-0612 - 1964-1968 FL Saddlebag Lock Kit Description Saddlebag lock kit is for both the right and left sides, as pictured. The lock kit is chrome.Kit includes all pieces for both bags...

Throttle spark control pin roller collar Fits:FL 1941-1972G 1927-1972K 1952-1956J 1921-1929FX 1971-1972EL 1936-1940WL 1929-1952XL 1957-1972F 1910-1920VL 1930-1936Additional Information

Spring Fork throttle plunger Fits:K 1952-1956FX 1971-1972FL 1954-1972XL 1957-1973Additional Information OEM No.56400-53A<

Spring Fork handlebar grip cap screw with tapered end is 8-32 X 1/4". Fits:K 1956-1956G 1954-1972FX 1971-1972FL 1954-1972XL 1957-1972Additional Information

Handlebar throttle end screw is zinc plated and is for use with FLH and XL-K models Fits:K 1952-1956FL 1953-1971XL 1957-1970Additional Information

New Old Stock" from 1980, rear hub cap is 4-prong, rusty raw steel style. Fits:XL 1952-1978Additional Information UOM1 - EA

AMF parts book for 1954-1978 Sportsters. Fits:XL 1954-1981Additional Information UOM1 - EA Manufacturer

Parts and manual set includes 3 different books for 1970-1984 Ironhead models.This set features the following books: Spare Parts Book for 1954-1965 XL, XLH Service and Parts Manual and V-Twin XL...

V-Twin - 48-0904 - 1959-1969 XL Service ManualDescription1959-1969 XL service manual includes the factory service manual information.**NOTE Product May Not Be Returned. Fits:XL 1959-1969Additional...

V-Twin - Black Leather Solo Seat Kit fits '52-'78 Sportster Models Includes Bates style tuck and roll leather solo seat, chrome 2" spring and mounting hardware. Note: UPS may consider this part...

XLCH solo seat kit includes a replica black leather solo seat with a zinc front solo seat nose bracket, chrome seat spring support bar and a chrome 2" seat spring set.Solo seat kit requires frame to...

Spoke set features 40 spokes and 40 spoke nipples.Spokes are easy to clean and maintain. For use on a 18" conventional rim with a steel flat flange hub. ...

Spoke set features 40 spokes and 40 spoke nipples.Spokes are easy to clean and maintain. For use on a 19" front drop center rim with a front brake drum alloy hub. Measurement from center of spoke...

XR rear hub includes the bearings to accept a 11/16" axle and a 51 tooth sprocket.*NOTE: Rear sprocket adapter and lock nut tool included. Fits: XL 1957-1989 Additional Information

Chrome hubcap for rear hub. Fits:XLCH 1957-1978XLH 1957-1978Additional Information UOM1 - EA Finish

XR 750 front spool hub is full alloy construction and features a natural finish with 9/16 innner diameter ball bearings. Also includes center and center tube and hex nut.Accepts 11/16" axle shaft and...

V-Twin - 44-1959 - Swingarm Pivot Bolt KitDescriptionSwingarm pivot bolt kit includes the swingarm pivot bolt, race set, and lock tab. Fits:XL 1952-1973Additional Information

Assembly includes a parkerized pivot bolt, bearings, races, lock tabs, seals, spacers, hardware and zinc plated pivot pin.. Fits:XL 1952-1973Additional Information