1967

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

V-Twin - 50-2064 - Lindby Custom Front Engine BarDescriptionFront engine bar feature 1-1/8" tubing with built in O-rings on the footpeg area.Front engine bar is constructed of a high strength steel...

Raw alignment clips are for hinged rear fenders, to be spot welded on the front portion of the fender.Sold as a pair. *NOTE: Used to align and hold the rear tail flap edges in place. Fits:FLH...

Swingarm rear fender hinge features a raw finish. Hinge includes both halves with pin but without wire loom tail.Hinge halves are produced with correct pin and hinge offset for installing on original...

Raw steel wire loom fender strip for inside of the left FL rear hinged fender, radiused to fit the fender contour, and segmented to accept tail lamp wires.Must be spot welded to the left side or...

Wire loom spring clamp features a raw finish and is for use with the rear fender. To hold spring loom cover in place use #32-2036. Clamp is sold in a pack of 5.*NOTE: Must be spot welded on. Fits:FL...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Front fender trim kit includes chrome front fender tip and front fender trim side rails for FL models. Fits:FL 1967-1972Additional Information UOM1 - SET

Bobbed rear fender kit includes a steel fender, cateye tail lamp, chrome tail lamp bracket, and chrome struts.We suggest pre fitting fender prior to painting. Order sissy bar components separately. ...

2022 New Production Replica rear fender is flip style with updated hinged tail.Fender will accept 1955-1972 type tail light. We suggest pre fitting the fender prior to painting. Before priming or...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Magneto advance plate screw set includes four allen flathead screws and 2 hex screws with lock nuts.Kit includes 4 tapered screws for mounting base to magneto head. Fits 1965-70 XL with Magneto cable...

Drag Specialties - DS325386 - Rear Brake Shoes - '63-'72 Big TwinFeaturesHigh-quality brake shoesReplacement Part for OEM Number(s):4180163Specs

Drag Specialties - DS272097 - ignition Switch - '36-'72 Big TwinFeaturesReplacement ignition and light switch with lock for Fat Bob-style dash panelsMeets or exceeds all OEM specificationsIncludes...

Drag Specialties - DS240360 - Fork Boots - 41 mm - FL/FLH '48-'77 (Early)FeaturesMolded rubber constructionReplacement Part for OEM Number(s):4598373Specs

Drag Specialties - DS240215 - Long Clutch Lever Rod End - '36-'78 FLFeaturesRod end for long "mousetrap" clutch lever rodReplacement Part for OEM Number(s):3691636Specs

Drag Specialties - DS190820 - Bolt Kit - Cam Cover - Knurled - Chrome - '36-'69 Harley-DavidsonFeaturesReplacement hardware for cam coverMade in the USASpecs

Drag Specialties - 24010850 - Board Mount Screws with Nuts - FrontFeaturesHas all required hardware for mounting driver floorboards to the mount bracketsIncludes four shouldered bolts and four...

Drag Specialties - 21130669 - Black Battery Cable Set - '65-'84 FLFeaturesBlack cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and...

Drag Specialties - 21130216 - Battery Kit - CHD4-12FeaturesMSDS Migration DataDrag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as...

Drag Specialties - 21121078 - Regulator - XL '65-'77 - BlackFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...

Drag Specialties - 21120927 - Regulator Mount - Harley Davidson - BlackFeaturesAllows the regulator to be mounted down and back out of sightOptional 10-24 holes on back of mount for ground wireMade...

Drag Specialties - 21120822 - Regulator - 12 Volt - BlackFeaturesHigh-reliability voltage regulators feature rugged aluminum alloy constructionProvides accurately regulated voltage under all...

Drag Specialties - 21100327 - Starter SolenoidFeaturesDesigned with extra current capacity for starting high-compression motorsRecommended for use with Drag Specialties High Performance...

Drag Specialties - 21100224 - Starter - High-Torque - ChromeFeaturesFeatures 15% more power and torque than OEM unitsManufactured using heavy-duty armature commutators, large drive-end bearings and...

Drag Specialties - 21100223 - Starter - High-Torque - BlackFeaturesFeatures 15% more power and torque than OEM unitsManufactured using heavy-duty armature commutators, large drive-end bearings and...

Drag Specialties - 21040136 - Plug Wires - '58-'69 XL with MagnetoFeaturesRated at SAE Class E J2031Constructed with silicone throughout the jacket to deliver high-temperature resistanceContinuous...

Drag Specialties - 21020365 - Magneto Coil - OrangeFeaturesFor use with 12-volt Magneto-style ignitions and Joe Hunt MagnetoReplacement Part for OEM Number(s):2952455ASpecs

Drag Specialties - 20500034 - Flasher Relay - 12 VFeaturesOEM replacement 12 V hazard flasher relayReplacement Part for OEM Number(s):6854164ASpecs

Drag Specialties - 20300886 - Fender License Plate Mount - BlackFeatures4" x 7" mount includes dual rubber gaskets, allowing the angle of the mount to be raised or lowered as neededIncludes all...

Drag Specialties - 16100013 - Brake Pedal - Chrome - FL/FXFeaturesReplacement pedal for Drag Specialties Forward ControlsSpecs

Drag Specialties - 16020081 - Shift Lever - Chrome - FXST/FLSTFeaturesUpdated forward controls come complete with brake and shift forward controlsChrome-plated mounts and hardware; comes complete...

Drag Specialties - 13050700 - Neck Post Bearing Cups with Races InstalledFeaturesChrome Timken-type bearing cupsSpecs

Drag Specialties - 13020001 - Swingarm Bearing KitFeaturesIndividual bearing kits that include required bearings, seals, spacers and lock tabsSpecs

Drag Specialties - 12120729 - Transmission Mainshaft Sprocket - 21 Tooth - XLFeaturesHigh-quality steel replacement sprocketHeat treated for added durabilityReplacement Part for OEM...

Drag Specialties - 11320602 - Clutch Release FingerFeaturesHigh-quality OEM replacement componentFor use with '36-'84 Big Twin 4-speedReplacement Part for OEM Number(s):3707039BSpecs