1967

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as...

Jims - 1700 Main/Shaft Clutch Gear Tool fits '36-'86 Big Twin Models w/ Kick-Start 4-Speed Transmission Features: Removes kick starter clutch gear successfully, without damage to the gear

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket

Jims - 95660-42 Main Seal Tool fits '41-'79 4-Speed Transmissions Features: Used to remove and install the main drive seal on specific Harley-Davidson® Big Twin models Made in the U.S.A

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 33096-54B Kickstarter Shaft fits '36-'86 Big Twin Models Features: Precision-machined replacement shaft Made in the U.S.A.

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models Features: Use on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length H

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal<

Jims - 96384-39 Shift Fork Gauge fits '39-'78 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A.

Jims - 96780-58A Piston Pin Lock Ring Tool fits Pre-'73 Big Twin & Sportster Models w/ 0.515” ID Wrist Pins Features: Use to install lock ring (Harley-Davidson® No. 22582-52) in piston having ...

Jims - 94557-55A Compensating Sprocket Socket Head fits '55-'70 Big Twin & Sportster Models Features: Used to remove and install compensating nut Made in the U.S.A.

V-Twin - SMC Electric Start Oil Tank fits '58-'64 FL, '71-'85 FX Models Swingarm York oil tank features a chrome finish. Oil tank is for use on 4-speed models with a stock swingarm frame. tncludes...

V-Twin - Nickel Plated Tappet Block Screw Kit fits '48-'84 FL Model Tappet base bolt set of eight with 1/4" x 20UNC thread, is nickel plated, and has a hex shaped head. Screw does not have taper and...

3 speed and reverse chrome left side tank hand shifter gate, has a 32N1R front to rear shift pattern. The distance center to center of the screw holes is 3.5". Note: Use 1/4"-28 x 1/2" hex head...

Zinc plated shift gate hex screws is 1/4"-28 x 1/2", National Coarse. Sold in a pack of 5. Fitment: G 1947-1973 FL 1947-1965

Swingarm frame oil tank rear mount bracket with spacers features bright zinc plating. Fitment: FL 1958-1984

V-Twin - Footboard Tabs fits '41-'84 FL, '36-'40 EL/UL Models Forged steel footboard tabs for 1" frame tubes. Fitment: EL 1936-1940 FL 1941-1984 UL 1936-1940

Namz - Speedometer Drive Block-Off Kit Features: Kit includes polished stainless steel block-off plate, gasket,10 x 24 stainless steel button-head screw and lockwasher Easy to install

Namz - Chrome Distributor Clamp Features: For models with aftermarket/electronic distributor Polished stainless steel construction Simple

Colony - 8137-34 Chrome Stock Engine Case Bolt Kit fits '65-'69 FL Model Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FL 1965-1969

Colony - 9018-5 Tank Hand Shifter Lever Stud fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33775-37) - Chrome Chrome Tank Hand Shifter Lever Stud Fitment: UL 1936-1948 EL 1936-1940 FL...

Colony - 9103-4 Shoulder Bolt fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33879-36) - Chrome Chrome shoulder bolt. Fitment: UL 1936-1948 EL 1936-1940 FL 1941-1984

Colony - 9203-3 Mousetrap Clutch Rod End Shoulder Bolt fits '52-'67 FL Model (OEM #36921-52) - Chrome Chrome mousetrap clutch rod end shoulder bolt. Fitment: FL 1952-1967

Colony - 9204-3 Mousetrap Clutch Rod End Shoulder Bolt fits '52-'67 FL Model (OEM #36921-52) - Cadmium Camdium mousetrap clutch rod end shoulder bolt. Fitment: FL 1952-1967

Colony - 9523-1 Chrome Oil Pump Check Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Chrome oil pump check valve plug Fitment: EL 1936-1940 FL 1941-1980

Colony - 9524-1 Cadmium Oil Pump Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Oil pump check valve plug with a cadmium finish Fitment: EL 1936-1940 FL 1941-1980

Colony - 9525-1 Parkerized Oil Pump Check Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Oil pump check valve plug with a parkerized finish Fitment: EL 1936-1940 FL 1941-1980

Colony - 9605-2 Chrome Oil Pump Relief Valve Plug fits '54-'67 FL Model (OEM #26377-54)  Chrome oil pump relief valve plug. Fitment: Chrome oil pump relief valve plug.

Colony - 9606-2 Cadmium Oil Pump Relief Valve Plug fits  '54-'67 FL Model (OEM #26377-54) Oil pump relief valve plug with a cadmium finish. Fitment: FL 1954-1967