1968

Old-STF Cycle - Brass Rocker Box Split Oil Line Features: No hassle kit for Shovelheads 1966-84. Heavy 1/4" Brass oil lines are pre bent with all necessary fittings. These lines will eliminate the problem of the "starving front head" All compression...

Paughco 1-3/4" Drag Pipes Fits Harley-Davidson 57-78, 80-85 XL Models Hanger bracket is required for installation, not included in package. Refer to part list below for additional accessories. Required parts and optional parts: 1861-1047 - Brake...

S&S Cycle - Stock Bore Cylinder and Stroker Piston Kit fits '66-'84 Shovelhead Engines This cylinder and piston kit can be used to create 84", 86" or 88" stroker engines, or to replace the cylinders and piston in an engine that already has an...

V-Twin - Tourist Trophy Gas Tank Set with Brackets fits '36-'52 EL, '41-'84 FL, '70-'84 FX Models Tourist Trophy gas tank set with brackets is 2.8 gallons without the dash cutout featuring a raw metal finish constructed of steel. For use with bayonet...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 1957-1978 Replica 2 gallon gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Accepts bung style vented gas cap and 1986-up vented type gas caps...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

The Accel Electo-Mechanical Voltage Regulator: Provides precise control of charging system voltage for maximum performance and reliability Built with high quality components set to OEM factory specifications Black Enamel or Chrome Finish

Belt Drives LTD. Kevlar Clutch Kit fits '68-E'64 Big Twin Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved. Different...

Biltwell Moto Smooth 1"  Handlebars These bars are almost identical to the height of most stock handlebars, but just slightly wider. They have a tracker style and look great on Hinckley Triumph Bonnevilles and Scramblers, Harley 48, Hugger,...

Colony - 3/8"-20 Brake Drum Wheel Mounting Socket Screw Set fits '36-'72 Big Twin Models (OEM #4026-35, 43530-35) Features: Complete with chip curls at bottom of the socket hole Reproduction of hardened 3/8"-20 bolts Made in the U.S.A...

Colony - 1"-24 Thread  Acorn Stem Nut Hardware Kit fits '00-'13 Touring, '00-'13 Softail, '99-'17 Dyna Models (OEM #45718-60) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A...

Colony - 11/16"-16 Acorn/Oversized Timing Plug Crankcase/Oil Tank with Special Tap fits '86-'95 Sportster Models Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 11/16"-16 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-38) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 2000 Harley-Davidson FXR...

Colony - 12-Point Lift Block Screws fits Big Twin Models (OEM #3750, 3770) Features: Made in the USA Sold in sets of 8 Fitment 1974-1976 Harley-Davidson 1200 Super Glide FXE - Notes: 1976Fits Early 1976...

Colony - 2144-1 Aluminum Primary Cover Filler Caps fits '54-'70 Sportster Model (OEM #34742-52A) Features Chrome or raw aluminum finish Made in the U.S.A. Fitment YearMakeModel 1958 - 1970 Harley-Davidson Sportster 900...

Colony - 2373-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models (OEM #45756-59) - Flat Top Features: Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000...

Colony - 2450-1 Front Wire/Cable Clip (OEM #9979) Features: Can be used for various custom applications High-quality reproduction of original clips Made in the U.S.A. Fitment 1965-1969 Harley-Davidson Electra Glide FL - - 1965-1969...

Colony - 2595-13 Cadmium Upper Motor Mount Bolt Kit fits '36-'69 Big Twin Models (OEM #16865-52, 7867) Features: Kits includes top motor mount bolt, locknut, three flat washers, two castle nuts, cotter key, one 29/64" washer, one 7/16" washer and one...

Colony - 2684-1 Chrome Rear Break Adjuster Nut fits '52-'78 Sportster Model (OEM #42264-52) Features: Made in the U.S.A. Fitment 1977-1978 Harley-Davidson Sportster 1000 XLT - - 1972-1978 Harley-Davidson Sportster 1000...

Colony - 3475-8 Cadmium-Plated Gas Tank Mounting Hardware Kit fits '52-'78 K KH Sportster Model Features: Gas tank mounting bolt and nut kit Made in the USA Fitment 1977-1978 Harley-Davidson Café Racer...

Colony - 3484-4 Front Brake Cable Adjuster Flat Type fits  '57-'72 Sportster Model Front brake cable adjuster screw is the round head with two flat style and features a cadmium plated finish Fitment: XL 1957-1972

Colony - 3498-2 Throttle Control Coil and Tail Lamp Stud Clamp Set fit '61-'77 XLH/XLCH, Models (OEM #9965W) Throttle control coil clamp and tail lamp stud clamp features a parkerized finish. Includes mounting hardware Fitment: XLH...

Colony - 3499-10 Fender to Brace Rivet Set fits '49-'84 FLH, '86-Up FLST, '79-Up FLT Models Fender to brace rivets set includes 10 3/16" x 3/8" fender to brace rivets Fitment: FLH 1949-1984 FLST 1986-UP FLT 1979-UP

Colony - 3533-3 Cadmium Front Brake Cable Clip fits '50-'71 FLH, '50-'71 FL Models (OEM #9963) Front brake cable clip features a cadmium finish Fitment: FLH 1950-1971 FL 1950-1971

Colony - 4-Speed Kicker Spring Stud fits '36-'86 Big Twin Models (OEM #33152-59) Features: Chrome-plated reproduction of original kicker spring stud Round, smooth head Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide...

Colony - 41mm Fork Slider Bottom Cap Studs with Nut fits '66-'77 Shovelhead, '49-'65 Shovelhead Models (OEM #45840-48) Features: Package of two Made in the U.S.A. Fitment 1965-1977 Harley-Davidson Electra Glide...

Colony - 5/8"-18 Hex Crankcase Timing Plug (OEM #704, 720) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 1983-1985 Harley-Davidson Sportster 1000...

Colony - 5/8"-18 Timing Plug Crankcase/Oil Tank fits '86-'95 Sportster Model Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 2000 Harley-Davidson FXR...

Colony - 7621-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models - Custom Features: Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000 XLH - - 1972 Harley-Davidson Sportster 1000...

Colony - 8112-20 Chrome Transmission Kicker Cover Nut Kit fits '36-'84 Big Twin Models (OEM #7055, 7752, 7835) Features: Kits include (9) nuts, (9) flat washers, (1) nut and (1) washer Made in the U.S.A...

Colony - 8160-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of original...

Colony - 8165-19 Cadmium Motor Mount Bolt Kit fits '36-'69 Big Twin Models (OEM #24791-36, 24794-36) Features: Kit Includes top motor mount bolt, two 3/8"-24 x 31/4" bolts, two front engine mounting bolts, three 3/8" x 7/64" washers, three castle...

Colony - 8307 Cadmium Complete Stock Hardware Kit fits '66-'69 Shovelhead Models Features: Kit includes all stock motor nuts, bolts, washers and studs All hardware meets or exceeds original H-D specifications Made in the U.S.A. Fitment: 1966-1969...

Colony - 8773-12 Cadmium Footboard Hinge Bolt Kit fits '49-'81 FL/​FLH Model (OEM #50635-14) Features: Kits include four shoulder bolts, with nuts, and lock washers Made in the U.S.A. Fitment 1981 Harley-Davidson Electra Glide Heritage...

Colony - 8876-5 Seat Bar Bushing Set fits '54-'80 Big Twin, '65-'80 Sportster Models (OEM #51925-65) Features: Precision-machined, heat treated and ground bushings Includes all mounting hardware Made in the U.S.A...

Colony - 8879-30 Chrome Rear Fender Mount Kit fits '58-'80 FL/​FLH Model (OEM #2272, 4018W, 4043W) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock...

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Model (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made...

Colony - 8924-8 Handlebar Throttle Spark Roller and Pin Kit fits '71-'72 FX, '54-'72 FL Models (OEM #56278-10) Handlebar throttle spark roller and pin kit. Fitment: FX 1971-1972 FL 1954-1972