1968

Colony - 9753-9 Allen Type Primary Cover Screw Kit fits '57-'69 XLCH Model Allen type primary cover allen screw kit with stamp. Fitment: XLCH 1957-1969

Colony - 9757-2 Allen Type Generator Screw fits '57-'70 Sportster Model Allen type generator screw. Fitment: XL 1957-1970

V-Twin - 35mm Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models Chrome lower fork stem cover can be installed without disassembling forks. Fork stem cover is for FXR and FXD models with 35mm fork tubes Fitment: FXR...

V-Twin - Chrome Lower Fork Stem Cover fits '57-'85 XLCH Model Chrome lower fork stem cover is one piece and includes small vent holes located behind the fork tube holes. Features "XLCH" stamped on the front of the fork cover. Fitment: XLCH...

Colony - 9783-4 Headlamp Visor Mount Kit Allen Type fits '82-'94 FXR, '91-'17 FXD, '59-Up Sportster Models Allen type headlamp visor mount kit. Fitment: FXR 1982-1994 FXD 1991-2017 FX 1971-1984 XL 1959-UP

Colony - 9797-20 Front Motor Mount Kit Allen Type fits '57-'84 Sportster Model Allen type front motor mount kit. Fitment: XL 1957-1984

Colony - 9799-20 Front Motor Mount Kit Hex Type fits '57-'84 Sportster Model Hex type front motor mount kit with a cadmium finish. Fitment: XL 1957-1984

V-Twin - Black Battery Top Cover fits '67-'78 XLH Model Battery top cover features a black finish Fitment: XLH 1967-1978

V-Twin - Zinc Rear Axle Kit fits '52-'56 K, '52-'78 Sportster Models XL zinc rear axle kit includes 10-1/2" bearing surface length axle, nut, sleeves, and spacers. Note: For 11/16" axle diameter Fitment: K 1952-1956 XL...

Colony - 9898-1 Chrome Kick Starter Spring Stud fits '52-'56 K, '57-'70 Sportster Models (OEM #33088-52) Chrome kick starter spring stud Fitment: K 1952-1956 XL 1957-1970

Colony - 9907-4 Chrome Fork Slider Drain Screws fits '52-'56 K, '71-'72 FX, '57-'72 Sportster Models (OEM #46201-52) Chrome fork slider drain screws are supplied with washers an d are sold in pairs Fitment: K 1952-1956 FX 1971-1972 XL 1957-1972

Colony - 9908-4 Cadmium Fork Slider Drain Screws fits '52-'56 K, '71-'72 FX, '57-'72 Sportster Models (OEM #46201-52) Cadmium fork slider drain screws are supplied with washers a nd are sold in pairs Fitment: K 1952-1956 FX 1971-1972 XL 1957-1972

Colony - 9960-1 Chrome Oversize Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '57-'85 Sportster Models Chrome allen timing plug is 11/16" - 16 oversize Fitment: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL...

V-Twin - Shifter Cam Plunger Kit fits '39-'76 FLT Model Shifter cam plunger kit. Fitment: FLT 1939-1976

V-Twin - Starter Gasket fits '67-'80 Sportster Model (OEM #31471-67A) Starter gasket for XL York electric start kit. Fitment: XL 1967-1980 Tech Note: Suggested to use with #32-1642 XL York Electric Start Kit

Sifton - 3/8" Stainless steel Petcock fits '57-74 Sportster Model Stainless steel Sifton petcock with 3/8" National Pipe Thread accepts 5/16" fuel line. Knurled knob turns fuel on and off. Does not include reserve feature.Petcock accepts 1/4 or 5/16"...

V-Twin - 12 Volt H-12 Battery Dry fits '67-'78 XLH, '65-'84 FLH/FL Models (OEM #66007-84) H-12 12 volt battery kit features a black case as original. Kit includes a 12 volt battery, red filler tube, hardware kit and clear vent tube. Battery is lead...

V-Twin - Replica Front Brake Shoe Set fits '71-'72 FX, '64-'72 Sportster Models (OEM #41849-64) Replica front brake shoe set features a die cast construction with linings bonded on. Sold as a pair Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Front Brake Backing Plate fits '71-'72 FX, '64-'72 Sportster Models (OEM #44148-64) Polished aluminum front brake backing plate is for front mechanical drum models Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Front Wheel Hub fits '71-'72 FX, '64-'72 Sportster Models (OEM #43600-64) Front hub wheel includes bearings and snap ring installed and comes completely assembled Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Chrome Header Pipe fits '57 '69 XLCH, '57-'78 Sportster Models (OEM #65454-59) XLCH header pipe features a chrome finish. Header set fits with XLCH wrap around tank only. The rear muffler attaches to the rear strut with clamp and stud kit...

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 WL 1929-1952 FXD 1991-1994 XL...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold cranking amps and amp hour capacity. AGM battery...

Motorshop - Pinion Shaft End Nut fits '54-'56 K, '57-'80 Sportster Models (OEM #8011) Pinion shaft end nut.Used on tapered end of pinion shaft when installing shaft into flywheel. Fitment: XL 1957-1980 K 1954-1956

V-Twin - AEE Mid Footpeg Support Bar Set fits '41-'99 FLH/FLT Models Natural stainless steel mid footpeg support bar set is for frames with a Flatside motor. Footpeg arms fit male FX style passenger pegs, not included. Order welded on lower frame...

V-Twin - XR 750 18" x 2.15" Rear Wheel fits '70-'84 XR, '37-'52 W, '57-'78 Sportster Models 18" x 2.15" WR/KR/XR rear wheel includes alloy hub with 9/16" bearings and a lock nut for the sprocket, stainless steel spokes and nipples and an 18" alloy H-C...

V-Twin - XR 750 19" x 2.50" Rear Flat Track Wheel fits '70-'84 XR, '52-'56 K, '57-'78  Sportster Models 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel...

V-Twin - WR 19" x 3.00" Front Spool Wheel fits '52-'56 K, '57-'72 Sportster Models WR 19" x 3.00" front spool wheel includes a nickel plated hub with 11/16" bearings installed, laced to a 19" x 3.00" chrome rim with stainless steel spokes and nipples...

V-Twin - Teardrop Carburetor Cover Kit fits '41-'65 FL, '71-'85 FX, '71-'87 Sportster Models Teardrop carburetor cover kit includes a 4 bolt Linkert carburetor face. Includes left and right side 1940 style painted tank emblem for right Overhead...

Buchanan Spoke - 19" Stainless Steel Spoke Set Buchanan fits Front '64-'72 Sportster, '71-'72 FX Models Buchanan spoke set features 40 spokes and 40 spoke nipples. Spokes are easy to clean and maintain. For use on a 19" front conventional rim with...

V-Twin - Zinc Plated XL Carburetor Support Bracket fits '57-'85 Sportster Model Zinc plated XL carburetor support bracket mounts to the tappet base stud on Ironhead models and is zinc plated. Order stud kit, separately. Fitment: XL 1957-1985

Motorshop - Black Replica Spool Kick Starter Pedal fits '57-'79 Sportster, '71-'84 FX, '36-'40 EL Models (OEM #2091-16) Replica spool black kicker starter pedal. Order bolt kit separately. Fitment: UL 1937-1948 K 1952-1956 XL 1957-1979 FX...

Drag Specialties - Rear Chain Adjuster Bolt fits '48-'72 Big Twin (3/ 8”-24 x 3”) (OEM #41576-36) Features: Adjuster bolts for rear chain Fitment 1971-1972 Harley-Davidson 1200 Super Glide...

Colony - 8307 Cadmium Complete Stock Hardware Kit fits '66-'69 Shovelhead Models Features: Kit includes all stock motor nuts, bolts, washers and studs All hardware meets or exceeds original H-D specifications Made in the U.S.A. Fitment: 1966-1969...

Colony - Throttle Roller/Pin Kit fits '54-'65 Big Twin Models (OEM #56276-31, 56278-10) Features: Kit includes hardened and grounded rollers, pins, coil plug set screws and control wire ends Designed specifically for Harley-Davidson­® Made...

Colony - Cam Cover Acorn Hardware Kit fits '66-'69 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1965-1969 Harley-Davidson Electra Glide FL - - 1965-1969 Harley-Davidson 1200...

Colony - Pushrod Kit fits '57-'85 Sportster w/ Solid Lifters (OEM #17904-57) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster...

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A...

Colony - Cylinder Base Nut Kit fits '36-'77 Big Twin Models (OEM #0265, 7839) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A. Fitment 2003-2006 Kawasaki KDX 50 - - 1978-2006 Suzuki JR...

Drag Specialties - Rear Master Cylinder fits '58-'72 FX/FL, 3/4” bore (OEM #41761-58) - Chrome Features: Complete rear master cylinder assembly Polished and chrome-plated Fully assembled for easy...