Super Glide FXE Electric Start

Cable ferrule set for the carburetor lever connection cable end.Sold as a set of 10. Fits:FLT 1982-1984FLT 1979-1984FL 1974-1984FX 1974-1984FXR 1982-1984XL 1974-1984Additional Information

One piece billet twist grip tube is for single or dual cable applications. Machined from aluminum bar stock. Fits:FL 1975-1996FX 1973-1996Additional Information

Right side speedometer drive is for a speedometer with a 2:1 ratio and is for front wheel drive and works great when converting from an electronic speedometer.Speedometer drive unit has a .750 axle...

Black front wheel drive speedometer cable with 16mm top nut. This 49" long cable is 6" over stock. Fits:FXR 1987-1992FXRS 1984-1987FXSB 1984-1986FXE 1973-1982FX 1973-1982XLH 1984-1984FXB 1981-1982XLH...

Inner carburetor choke wire. Fits:FX 1973-1984FL 1979-1980 Early 1980Additional Information UOM1 - EA

Stainless steel clutch cable features heavy duty constructio n designed for reliability and longer service. This cable ha s a casing length of 52.56 Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FXWG...

Black clutch cable features a heavy duty construction, designed for reliability and longer service. The cables casing length is 48" with a stock outer diameter. Fits:FX 1971-1984FL...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 48" casing length and is 52.5625" in overall length. Fits:FLH 1970-1984FXEF...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 56" cas ing length and an overall length of 62.625". Cable is 4" ove r stock. Fits:FL...

Black clutch cable features heavy duty construction designed for reliability and longer service. The cables casing length is 48 Fits:FX 1971-1984FL 1968-1984Additional Information <

V-Twin black clutch cable is 6" over stock length. Casing is 57" with an overall length of 65".Features a heavy duty construction designed for reliability and longer service life. Fits:FL...

V-Twin black clutch cable has a casing length of 51.625" and a 58.50" overall length. Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FX 1980-1986Additional Information

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

Black throttle cable has is 12" over stock length. Casing length is 45". Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information UOM

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Nylon throttle tube for single cable throttle. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information OEM No.56220-74

V-Twin - 35-3007 - Anderson Twist Grip Assembly ChromeDescriptionDual cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with a...

V-Twin - 35-3004 - Anderson Twist Grip Assembly BlackDescriptionSingle cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with...

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Friction spring throttle tension screw fits 1974-2022 with single or dual throttle.Sold in a pack of 10. Fits:XL 1974-2022FXR 1982-1994FL 1974-1984FX 1974-1984FXD 1991-2017FLST 1986-2017FXST...

40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

Keihin carburetor kit with butterfly type carburetor without air cleaner includes manifold and intake clamps. Fits:FL 1966-1977FX 1973-1977Additional Information

Polished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information

Single handlebar throttle cable assembly with black grips.Includes 2 chrome end plugs for grips. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...