Super Glide FXE Electric Start

Ignition coil strap has a black finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-65

Stainless steel alternator plug retainer bracket bolts to the front left engine mount bolt, and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT...

V-Twin - 31-0510 - Chrome 1-3/4 inch Universal Solo Seat Nose BracketDescriptionChrome 1-3/4" universal solo seat nose bracket allows the seat to be mounted to frame tubes or mount brackets.*NOTE:...

V-Twin - 31-0472 - Tail Lamp Bracket for Bobbed FendersDescriptionChrome tail lamp bracket for a bobbed fender Fits:Replacement application for fenderReplacement application for fender on 1972-1984...

Ignition coil strap has a chrome finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-72

Zinc dash mount cross bracket features center hole for mounting. Bracket allows mounting of dash kits with GPS speedometer and tachometer to 1973-1984 FXE models.*NOTE: Accepts dash mount kit to...

V-Twin - 31-0271 - License Plate Frame Bracket Kit ChromeDescriptionLicense plate kit includes stock style 3-hole bracket assembly, license backing plate, frame and 4 krommets.For show or off road...

V-Twin - 31-0255 - Turn Signal Mounting Clamp Screw KitDescriptionTurn signal mounting kit contains 4 pieces, 2 short and 2 long screws. Fits:FXST 1984-UPFX 1973-1984XL 1973-UPFXR 1984-1994Additional...

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome bracket set includes right and left sides for front fork triple tree spotlamp mounting.Sold in a quantity of 2. Fits:FX 1971-1984Additional Information

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Electric starter motor bracket has a chrome finish. Bracket acts as a starter and battery box mount. Fits:FXE 1974-1984 Hitachi starterAdditional Information OEM

V-Twin - 31-0158 - License Plate Frame Bracket ChromeDescriptionChrome 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Zinc plated air cleaner support bracket. Fits:FL 1971-1977FX 1971-1976Additional Information OEM No.29018-71A

Black ignition coil mount kit includes the outer strip. These stock style brackets mount to existing studs and include nuts, screws, and washers to mount coil.Order separately studs to mount bracket...

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA<

Top engine mount replaces stock type and features choke mount and key switch. Fits:FX 1973-1980Additional Information OEM No.69018-73A

V-Twin - 31-0086 - License Plate Frame Bracket BlackDescriptionBlack 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Parkerized plain head bolt gas tank mounting kit. Fits:FL 1973-1975FX 1971-1987Additional Information UOM1 - KIT

Replica muffler features the cigar style for kick start models.Also fits boat tail models. *NOTE: Use with 24" cigar muffler, sold separately. Fits:FX 1970-1975Additional Information <

Alphabet FX-FXE exhaust header set features a black finish.Installation may not be compatible with some forward or mid controls. Front and rear header included. *NOTE: Not connected by equalizer tube...

Alphabet FX-FXE exhaust header set features a chrome finish.Installation may not be compatible with some forward or mid controls. Front and rear header included. Front and rear exhaust are two...

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Replica Shovelhead chrome upsweep drag header set will accept straight fishtail extensions or mufflers. Includes a rear header pipe and a front header pipe.For use on Shovelhead nose cone motors in...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

V-Twin - 28-2251 - O-Ring Style Handlebar Grip SetDescriptionV-Fire grip set has flat O-ring rubber bands and chrome plating. The throttle sleeve will accept single or dual cables. Features a die...

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

V-Twin - 28-2229 - Rail Style Grip SetDescriptionV-Fire black rubber rail style. Chrome die cast construction with black rails. For use with 1" handlebars.Sold in a quantity of 2. Fits:FXR...

Handlebar damper is nylon and provides stiffer dampening action and longer life. Fits: FXR 1982-1994 FXD 1991-2017 XL 1973-2003 FX 1973-1984 FLST 1986-2017 FXST 1984-2017 FL 1973-1984 Additional...

Stop tail lamp switch cap is made of rubber and protects the stop switch from moisture. Stock replacement type. Fits:XL 1972-1981FX 1972-1981Additional Information

V-Twin - 28-2004 - Headlamp Boot RubberDescriptionRubber headlamp boot. Fits:FX 1974-1984XL 1974-1984Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1985 - Replica Black Waffle Handlebar Grip Set with Plug HoleDescriptionReplica black waffle grips are soft rubber and have a 1-1/8" inner diameter on the throttle grip and 1" on the left...

V-Twin - 28-1955 - Rear Master Cylinder Rubber BootDescriptionRear master cylinder boots are sold in an assortment of 5 early and 5 late type. Stock OE replacement. Fits:FL 1958-1978FX...

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

V-Twin - 28-0975 - Grey Grip Set 1909 StyleDescriptionThese grey rubber 1909 style grips will give your modern bike a cool retro style. Grips are for a 1" and 1-1/8" handlebar.Sold in a quantity of 2...