1977

V-Twin - Black Finned Derby Cover fits '84-'98 FXST, '85-'94 FXR, '86-'98 FLST Models Finned derby cover features a powder coated black finish. Order gasket and screws separately. Fitment: FL 1970-1984 FXST 1984-1998 FLT 1979-1998 FX...

V-Twin - Chrome Acorn Type Rear Axle Kit fits '73-'84 FL/FX Models Chrome rear axle kit includes a 11-3/8" bearing surface length axle. Fitment: FL 1973-1984 Rear axle FX 1973-1984 Rear axle Measurements: Bearing Surface: 11-3/8" Overall...

Colony - 9901-1 Cadmium Kick Starter Spring Stud fits '71-'78 Sportster Model (OEM #33088-71) Cadmium kick starter spring stud Fitment: XL 1971-1978

Colony - 9960-1 Chrome Oversize Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '57-'85 Sportster Models Chrome allen timing plug is 11/16" - 16 oversize Fitment: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL...

V-Twin - Shifter Cam Plunger Kit fits '39-'76 FLT Model Shifter cam plunger kit. Fitment: FLT 1939-1976

V-Twin - Starter Gasket fits '67-'80 Sportster Model (OEM #31471-67A) Starter gasket for XL York electric start kit. Fitment: XL 1967-1980 Tech Note: Suggested to use with #32-1642 XL York Electric Start Kit

V-Twin - 12 Volt H-12 Battery Dry fits '67-'78 XLH, '65-'84 FLH/FL Models (OEM #66007-84) H-12 12 volt battery kit features a black case as original. Kit includes a 12 volt battery, red filler tube, hardware kit and clear vent tube. Battery is lead...

V-Twin - Outer Primary Gasket Kit fits '65-'81 FL, '71-'81 FX Models Outer primary gasket kit includes one primary cover gasket, one derby cover gasket and one inspection plate gasket. Gaskets are not beaded Fitment: FL 1965-1981 FX 1971-1981

V-Twin - Chrome Header Pipe fits '57 '69 XLCH, '57-'78 Sportster Models (OEM #65454-59) XLCH header pipe features a chrome finish. Header set fits with XLCH wrap around tank only. The rear muffler attaches to the rear strut with clamp and stud kit...

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 WL 1929-1952 FXD 1991-1994 XL...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold cranking amps and amp hour capacity. AGM battery...

Motorshop - Pinion Shaft End Nut fits '54-'56 K, '57-'80 Sportster Models (OEM #8011) Pinion shaft end nut.Used on tapered end of pinion shaft when installing shaft into flywheel. Fitment: XL 1957-1980 K 1954-1956

V-Twin - AEE Mid Footpeg Support Bar Set fits '41-'99 FLH/FLT Models Natural stainless steel mid footpeg support bar set is for frames with a Flatside motor. Footpeg arms fit male FX style passenger pegs, not included. Order welded on lower frame...

V-Twin - XR 750 18" x 2.15" Rear Wheel fits '70-'84 XR, '37-'52 W, '57-'78 Sportster Models 18" x 2.15" WR/KR/XR rear wheel includes alloy hub with 9/16" bearings and a lock nut for the sprocket, stainless steel spokes and nipples and an 18" alloy H-C...

V-Twin - XR 750 19" x 2.50" Rear Flat Track Wheel fits '70-'84 XR, '52-'56 K, '57-'78  Sportster Models 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel...

Colony - 7616-1 7/8" X 18 Thread Cadmium Transmission Fill Plug fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models Cadmium transmission fill plug, standard 7/8" X 18 thread Fitment: UL 1937-1948 FX 1971-1984 EL 1936-1940 FL 1941-1984

Colony - 7619-1 Chrome Domed Triple Tree Fork Stem Nut fits '71-'84 FX, '78-'87 Sportster Models (OEM #45718-71) Chrome domed triple tree fork stem nut features 7/8" x 24 inside threads. Fitment: FX 1971-1984 XL 1978-1987 Measurements: Inner...

Colony - 7622-1 Chrome Fork Tube Cap fits '73-'84 FX, '82-'85 FXR, '73-'85 Sportster Models (OEM #45993-73) Chrome fork tube cap. Fitment: FX 1973-1984 FXR 1982-1985 XL 1973-1985

V-Twin - Transmission Mainshaft Seal Kit fits '71-'79 FX, '39-'48 UL, '39-'40 EL Models (OEM #35230-39) Transmission mainshaft seal kit. Ssal, coated cork and key included in kit Fitment: FX 1971-1979 UL 1939-1948 EL 1939-1940 FL 1941-1979

V-Twin - Teardrop Carburetor Cover Kit fits '41-'65 FL, '71-'85 FX, '71-'87 Sportster Models Teardrop carburetor cover kit includes a 4 bolt Linkert carburetor face. Includes left and right side 1940 style painted tank emblem for right Overhead...

V-Twin - Zinc Plated XL Carburetor Support Bracket fits '57-'85 Sportster Model Zinc plated XL carburetor support bracket mounts to the tappet base stud on Ironhead models and is zinc plated. Order stud kit, separately. Fitment: XL 1957-1985

Motorshop - Black Replica Spool Kick Starter Pedal fits '57-'79 Sportster, '71-'84 FX, '36-'40 EL Models (OEM #2091-16) Replica spool black kicker starter pedal. Order bolt kit separately. Fitment: UL 1937-1948 K 1952-1956 XL 1957-1979 FX...

Edart - 10" Razor Style Rear Brake Disc fits '72-'80 FX, '72-'80 FL Rear Models Polished stainless steel with chrome center razor style disc is interchangeable with stock brake discs. Disc has a center hole inner diameter of 1.98". Disc will also...

V-Twin - Nugget Oil Gauge Kit fits '71-'85 Sportster, '71-'84 FL/FX Models Kit includes a 0-60lbs liguid oil pressure gauge, featuring a black face, stainless steel case, chrome rim housing and weather resistant sealed lens with a chrome large knuckle...

Wyatt Gatling - Shovelhead Chrome Rocker Box Line Kit fits '79-'83 FLT, '66-'84 FL, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Tubes feature a chrome finish over the brass...

Wyatt Gatling - Brass Shovelhead Rocker Box Line Kit fits '79-'83 FLT, '71-'84 FX, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Install hex fitting in the engine block...

V-Twin - Drag Exhaust Pipe Heat Shield Set fits '70-'84 FX, '70-'84 FXS, '70-'84 FXE Models - Chrome Chrome heat shield set for drag pipes on FX, FXE and FXS models. Could fit muffler pipes if trimmed down. Pipes are 38" long with slash cut ends and...

V-Twin - 1-3/4" Black Exhaust Pipe Mount Bracket fits for Custom Application Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

V-Twin - Black Exhaust Bracket fits '71-'85 FX Model Black channel exhaust mount bracket fits MCM drag pipes. Pipes are 38" long with slash cut ends and features channel mounts for mounting. For mounting drag pipes, use t-bolts...

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits Front Wheel '73-'84 FL, Rear Wheel '73-'84 FL, '73-'81 FX Models (OEM #40908-81) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

V-Twin - Corbin Gentry Tuck and Roll Seat fits '71-'84 FX, '65-'84 FL Models - Black Black Corbin Gentry tuck and roll seat features the original design of the 1970's. The seat does not come with the rear mounting tab. Measurements: Length:...

V-Twin - Frame Mount Solo Seat fits '70-'84 FX, '65-'84 FL Models - Black Vinyl Frame mount vinyl solo seat is equipped with molded high density foam padding and a plastic seat pan. This solo seat mounts directly to the frame without springs. The...

V-Twin - AEE Shock Set with Covered Springs fits '73-'84 FX '73-'84 FL Models (OEM #54500-73A) AEE chrome 12" shock set comes with full covered springs. The inner diameter of the top eyelet is .512". The inner diameter of the bottom eyelet are...

V-Twin - MCM FXE Exhaust System fits '71-'84 FX, '71-'84 FXE Models Chrome plated muffler pipe set features a steel core baffled tapered muffler and 1-3/4" header pipes with one piece construction and channel mounting. Features bolt on installation...

V-Twin - MCM FXE Goose Drag Pipe Set fits '70-'84 FXE Model - Chrome Chrome goose style drag pipes feature retro chopper styling in 1-3/4" diameter, with channel mounts and is 35" long with slash cut ends. *NOTE: Does not have baffles or drilled...

V-Twin - Chrome 2 into 1 Exhaust Header Set fits '70-'84 FL, '71-'84 FX Models Chrome 2 into 1 exhaust header pipe set is for use with forward controls only. Set includes 12mm oxygen sensor bung. The turn out end is 3" in diameter. For use with...

Colony - Fork Drain Screws fits '84-'99 FXST/​FLST, '84-'98 FLT/​FLHT/​FLHR/​FLTR, '84-'86 FXWG Models (OEM #45858-77) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - 8769-3 Front Axle Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4"...

Colony - Pushrod Kit fits '57-'85 Sportster w/ Solid Lifters (OEM #17904-57) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster...

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A...