1978

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - 16" x 3.00" Front or Rear Spoke Wheel fits '73-'84 FL, '73-'82 Rear Only FX Models Replica 16" X 3.00" single disc wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals. This wheel has a large valve stem hole to...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '73-'84 FL, '73-'81 FX (OEM #40908-81) Features: Valve Stem: SRV (Side Rubber Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Colony - 8876-5 Seat Bar Bushing Set fits '54-'80 Big Twin, '65-'80 Sportster Models (OEM #51925-65) Features: Precision-machined, heat treated and ground bushings Includes all mounting hardware Made in the U.S.A...

Colony - Cylinder Base XLR Type Nut fits '57-'84 Sportster Model Features: For use on specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000 XLX - - 1983-1984 Harley-Davidson Sportster 1000 XR - - 1979-1984...

Colony - Acorn Cylinder Base Hardware Kit fits '57-'85 Sportster Model Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000 XLX - - 1983-1984 Harley-Davidson...

Colony - Transmission Mounting Hardware Kit fits '77-'84 Shovelhead Model (OEM #47730-77) Features: Kit includes two carriage bolts, one 3/8" - 16 x 1" bolt, four 3/8" - 24 nuts, six 3/8" lock washers, two washers, 5-3/8" x 3/32" washers, and two...

Colony - Motor Case Kit fits '70-'78 Shovelhead Model (OEM #24806-36, 24815-40) - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Replacement Part for...

V-Twin - Black Front 1 Piston Caliper Set fits FXR & XL Models (OEM #44195-80) Features: Caliper set includes body, 1 piston, seals right and left, brake pads and inner and outer plates flat black finish Order mounting hardware separately Sold...

Colony - Seat Post Bushing fits '58-'80 Big Twin Models (OEM #47094-58) Features: Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special FLHX - - 1983-1984 Harley-Davidson Low Rider...

Colony - Front Fender Mounting Hardware Kit fits '49-'78 Big Twin Models (OEM #3991, 7410) - Parkerized Features: Kits include four locktabs, and four bolts Made in the U.S.A. Fitment 1978 Harley-Davidson Electra Glide...

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Model (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made...

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the...

Colony - Transmission Kicker Cover Stud Kit fits '36-'84 Big Twin Models (OEM #24818-52, 33298-36) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - Cylinder Base Acorn Hardware Kit fits '78-'84 Big Twin Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Drag Specialties - Fat Bob-Style 3½-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 54" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 10" Rear Vintage Drilled Brake Rotor Shovelhead - Polished Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Drilled for better heat dissipation and faster braking in wet...

Drag Specialties - Front Brake Caliper fits '72-'84 Touring Models (OEM #4400880) Features: OEM-style calipers in chrome finish Complete with all necessary mounting hardware and brake pads Check caliper-to-wheel clearance on custom wheels...

Drag Specialties - Chrome Rear Brake Caliper fits '73-'80FL/FX Models (OEM #4400078B) Features: Mounts directly to the OEM mounting bracket Accepts OEM bolts, shims, bushing and retainer (not included) Brake pads and bleeder screw...

DP - Heavy-Duty Clutch Kit fits '71-E'84 Sportster Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or...

Drag Specialties - Oil Pump Assembly fits '73-'91 Big Twin Models This is a high-quality replacement cast aluminum pump body with steel gears and a shaft. Features Raw cast aluminum finish Gaskets and seals included; mounting hardware sold...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Stainless-Steel) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Brass) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

Prism Supply Co. - Natural Stainless Steel Footpeg Support Bar Set fits Shovelhead/ Evo Motors w/ Cone Open Primary This Footpeg Support Bar Set is designed for frames featuring an installed "cone" type motor. It accepts female chopper footpegs that fit...

GMA - Classic Chrome 2-Piston Front Brake A-Caliper fits '73-'84 FLH Models (Single Disc) These front brake calipers are constructed with billet aluminum with a smooth or classic "fin" design. The single-disc applications require the 5/8" bore master...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1952-1978 Replaces Harley-Davidson part number 61006-57. Description: Replica gas tank has a right side petcock location, and fuel capacity of 3.5 gallons. Check the tank for flaws and fit before...

Drag Specialties - Buckhorn 1" Handlebars - Notched for TBW Drag Specialties 1" Buckhorn style handlebars for Harley model and custom applications. These bars are notched for Throttle By Wire (TBW) applications. Features: Available in a Chrome,...