1978

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Seat spring yoke bracket mounting kit includes hardware to mount two buddy seat yoke brakets. Kit features a parkerized finish. Fits:FL 1965-1984FLH 1965-1984Additional Information

Headlamp cowl screw kit features a polished chrome finish.Includes (4) 5/16"-24 UNF x 3/4", (4) 5/16"-24 UNF x 9/16", (2) 1/4"-20 UNC x 3/4" allen button head screws, and (2) .0289" I.D. x .6299" O.D...

Chrome kick starter pedal shoulder bolt is 3/8"-24 X 1-1/4". Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL 1941-1984WL 1929-1952Additional Information

Triple tree stem nut washer. Fits:FXR 1982-1986FX 1971-1984XL 1971-1986Additional Information UOM1 - EA

Seat spring mounting kit includes shoulder bolts, cupped washers, bolt, nuts and washers. Fits:FLH 1968-1984FL 1968-1984Additional Information UOM

7/16" brake rotor bolt set features carriage bolt head with square position under head, to press into 7/16"holes on rotor side of hub.Includes (5) 7/16"-14 x 1 bolts and (5) nyloc nuts. *NOTE: Fit...

Chrome pedal bolt kit includes spacer, lock washer, and spring washer. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL 1941-1984WL 1929-1952Additional Information

Front fender trim rail mount kit. Fits:FLH 1949-1984Additional Information UOM1 - KIT ManufacturerV-T

Oil tank mount kit. Fits:XLH 1967-1978Additional Information UOM1 - KIT ManufacturerV-Twin

Oil tank mount kit.We recommend using V-Twin #42-1875, XLCH battery tray, to fit a 16 amp Harley Davidson battery for an FXE or 2004-up XL. V-Twin #42-1875 also mounts to "Lunch Box" type oil tanks...

Headlamp cowl screw kit features a brushed chrome finish.Includes (4) 5/16"-24 UNF x 3/4", (4) 5/16"-24 UNF x 9/16", (2) 1/4"-20 UNC x 3/4" allen button head screws, and (2) .0289" I.D. x .6299" O.D...

Stainless steel headlamp cowl screw kit. Fits:FL 1960-1984Additional Information OEM No.2824W UOM1 -

Chain guard mount kit has a zinc finish. Fits:FX 1973-1984Additional Information UOM1 - KIT FinishChr

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

Cast dash panel mount studs only. Fits:FXDWG 1991-1995FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information

Luggage rack strut spacers.Spacers can be used with 5/16" bolts. Sold as a set of 4. Fits:FL 1958-1984Additional Information OEM No.90908-58

3/8" Internal biter lock washers Fits: XL 1971-1984 Additional Information OEM No. 7130W UOM 25

Auxiliary seat square head bolts with a 5/16"-24 X 7/8" thread.Sold as a set of 2. Fits:FL 1965-1984Additional Information OEM No.3951B

Acorn type fork triple tree stem nut has a chrome finish without shoulder. Fits:FXST 1984-1999FL 1948-1984FLH 1948-1984Additional Information UO

Acorn type triple tree stem nut with shoulder, 1" - 24 thread. Fits:FXST 1984-1999FLST 1986-1999FL 1948-1984FLH 1948-1984FX 1980-1986Additional Information

Magnetic oil tank drain plug and timing hole plug prevents metal particles from circulating through engine, and oil tank. Plug is 5/8" - 18 UNF. Fits:FL 1965-1984FX 1971-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through engine, and oil tanks. Plug is 3/8" - 24 UNF. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through the transmission. Plug is 1/2" - 13 UNC. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating. Plug is 1/2" - 20 UNF. Fits:FXST 1984-1986FL 1965-1984FX 1971-1984FXR 1984-1986Additional Information

Raw steel motor mount repair bushing kit has a 3/8" inner diameter and a 1/2" outer diameter. This kit is used to align motor after frame mount repair.Drill a 1/2" hole in motor mount. The 3/8"...

Chrome front axle cap cover set is cap style. Includes right and left caps with set screws for glide type forks.Sold as a pair. Fits:FXDWG 1993-2005FLST 1986-2006FXST 1984-2006FLT 1980-1984FLT...

Allen type rocker arm shaft plugs have a chrome finish and includes sockets and cups. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR 1982-1983XL 1971-1984Additional Information

Clutch cable in braided stainless steel with clear coat fits Sportster models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Transmission drive speedometer cable features cadmium plating and has an outer diameter of 10mm and a length of 35". Cable has a flexible metal housing and a hex nut fitting. Includes 5/8" top nut...

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 6.5mm and is 35" long. Cable is constructed of zinc plated flexible metal casing. Fits:FLHS...

Zicad transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 10mm and a length of 35". Cable has a zi-cad plated flexible metal housing and a hex nut fitting...

Tachometer drive gear assembly features a cadmium finish. Fits:XLH 1971-1980XLCH 1971-1980Additional Information OEM No.92097-71

Black clutch cable feature heavy duty construction designed for reliability and longer service. This 64.56" long cable is 12" over stock. Fits:FL 1970-1984FXEF 1984-1985FXS 1977-1982FXST...

Right side speedometer drive is for 2:1 ratio and the front wheel only. Speedometer drive has a .750 axle hole and a spacer. The spacer width is .268 and has an overall length of .789. Features a...

Chrome plated transmission drive speedometer cable with 5/8" top nut. This cable has a length of 35" and has a chrome plated flexible metal housing with a hex nut fitting, for the transmission drive...

Stainless steel braided clutch cable has a casing length of 60.56". Cable is 8" over stock length.Features a heavy duty construction designed for reliability and longer service. Fits:FX 1971-1984FL...

Throttle cable ends for Keihin carburetor. Fits:XL 1976-1980FL 1976-1980FX 1976-1980Additional Information OEM No.56508-76 <

Carburetor choke wire includes inner wire and thread size of 10-32. Fits:XL 1972-1978Additional Information OEM No.29216-72

Carburetor choke tube kit. Fits:FX 1973-1978FXS 1973-1978Additional Information UOM1 - KIT Measuremen