1978

Stroker intake manifold is flat seal type. It is a replacement for all OKO and S&S B & E 1-7/8" Super carburetors. For models with a .200 longer cylinder. Fits:FL 1978-1984FX 1978-1984Additional...

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Nylon throttle tube for single cable throttle. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information OEM No.56220-74

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2031 - 47mm OKO Shorty Carburetor Kit BlackDescriptionPerformance 47mm shorty carburetor with a black finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated...

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Black intake manifold clamp set is two piece type without seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 -

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

Keihin carburetor jet replacement. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA

Keihin carburetor air neddle. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Replica butterfly type Keihin carburetor accepts all replacement OEM components. Complete carburetor assembly includes updated needle and jet with fuel passages.Keihin carburetor is single cable...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

2024 New Production natural alloy cast 1-7/8" intake manifol d is the flat seal type for use on OKO and S&S carburetors as a stock replacement.Machined for use with S&S and OKO carburetor...

Keihin carburetor rebuild kit contains all components for a professional accelerator pump rebuild.Includes 59.5mm Keihin accelerator pump rod for valve. Fits:XL 1976-1987FXD 1976-1992FLST...

Solid stainless steel intake manifold clamp kit is flexible for a form fit around the seals. Includes Vtwin's original "Red" flat seals. Fits:XL 1978-1985FL 1978-1984Additional Information

OKO Keihin carburetor kit with single throttle operation is for Ironhead models. Original butterfly type with choke and accelerator pump as original, with OEM type manifold and clamps. Flat seals...

Polished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

Accelerator pump housing features a diaphragm body with a ball and passage. Fits:XL 1976-1978 early 1978 modelsFL 1976-1978 early 1978 modelsFLST 1976-1978 early 1978 modelsFXST 1976-1978 early 1978...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

Heavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information

Black intake manifold clamp set includes flat style seals and fillister screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information

40mm XL carburetor kit. Fits:XL 1971-1985Additional Information UOM1 - KIT ManufacturerV-Twin

Single handlebar throttle cable assembly with black grips.Includes 2 chrome end plugs for grips. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on...

Sifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated position on...

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29

Replica zinc intake manifold clamp set features fillister head screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information OEM No.

Intake manifold clamp update kit is used to update early intakes to late style seals or when intake flanges are damaged on early heads. Kit includes manifold rings, silicone seals, and stainless...

Stainless steel intake manifold clamp set includes flat type seals and fillister screws.*NOTE: May require thicker manifold seal. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information

Stainless steel power intake clamp set features a "floating bridge." Kit includes flat seals.This kit closes the gap under the "T" bolt for a total 360  wrap around seal. *NOTE: Includes USA made...

Chrome petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for...