1978

Exact replica black footboards with factory style "X" ribs and construction. Features black half moon footboard rubber inserts with bullseye.Set of two. Footboard rubbers are glued in place, rivets...

Short front footboard stud is for the right side. Fits:FL 1970-1984Additional Information OEM No.50657-70A UOM

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.Uses large female driver footpegs. Order footpegs and return springs separately. Fits:XL...

Chrome mustache highway bar kit with cats paw footpegs.These bars are not to be used with a front engine bar. Fits:FX 1971-1984FL 1958-1984Additional Information

Passenger footboard kit includes brackets and chrome boards with rubber inserts. Fits:FL 1973-1984Additional Information UOM1 - KIT

V-Twin - 27-0570 - Footboard Pad SetDescriptionPads for D-shaped footboards.Mounting bracket features 10" spacing. Fits:FLT 1980-UPFL 1974-1984FLST 1986-UPAdditional Information

V-Twin - 27-0560 - Shifter Peg Kit for Heel-Toe ShifterDescriptionFlame shifter peg kit for use with heel toe shifters. Features chrome flames with rubber accents.Sold as a pair. Fits:FL...

Center kickstand kit is constructed of cast aluminum and includes spring, and hardware for mounting to stock swingarm frames. Fits:XL 1957-1981K 1952-1956Additional Information

Chrome kickstand tab kit includes washer, acorn nut, and tab . Fits:FXST 1984-1999FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Constructed of steel and chrome plated, this adjustable kickstand stop is installed on the kickstand shaft to prevent the leg from banging into the primary case. Fits:FLST 1986-1990UL 1938-1947FXST...

Chrome kickstand mounting kit includes kickstand mount, spring, leg stop, and spring plate. Kickstand measures 11-1/2" from bend to top. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL...

Chrome kickstand mount bracket is without holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand spring plate. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Stop your kickstand from hitting your primary cases by installing this steel leg stop on your kickstand shaft. Fits:FLST 1986-2006FXST 1984-2006FX 1971-1984EL 1936-1940FL 1941-1984Additional...

Stamped forged steel footboard mount tab set. Fits:EL 1936-1940FL 1941-1984UL 1936-1940Additional Information UOM1 - SET

Kickstand shaft washer set installs between the stand and the bracket. Features a zinc plated finish.Used to adjust the height when the stand is attached to the bracket. Fits:FL 1941-1985Additional...

Skeleton foot kickstand features constructed polished stainless steel. End is threaded for hex bolt.May require shim wedge under kickstand mount or washer on shaft. Order spring and lock tab...

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes...

Zinc oval inspection cover for the left side with footpeg spline.. Fits:FL 1965-1984Additional Information UOM1 - SET

Zinc right side footpeg mount support is straight type.Mounting hole inner diameter measures 11/16". Fits:FX 1978-1984Additional Information OEM No.

ISO mount swingarm chain guard has a black finish and comes with rubber bushing and rear bracket.Can also be used on 1958-1984 FL for the lighter FX look. Fits:FX 1966-1978FL 1958-1984FXE...

FLH style full chain guard has a gloss black finish and includes bushing. Fits:FL 1963-1982Additional Information OEM No.60302-63

FLH style full chain guard has a chrome finish and includes bushing.Center hole to center hole measures 10-5/8". Fits:FL 1963-1982Additional Information OEM

Passenger Peg Mounts are polished aluminum. Mounts can be adjusted up and down to provide passenger a comfortable ride.These passenger peg mounts install footpegs or passenger footboards. Fits:FL...

Footpeg mount stud has 1/2" x 20 thread with a zinc finish. Fits:FL 1974-1984FX 1974-1984Additional Information OEM No.52683-74 <

Lower front mount tie rod ball joint.The ball diameter is 1.259", the step downo from that is .940", the center is 1.007", the step down from the center is .857" and the end is 1.012". Fits:VL...

Rear wheel brake rod and cable adjusting nut features a cadmium finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM<

Rear wheel brake rod and cable adjusting nut features a chrome finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM

Includes 16-7/8" extra long rod, nuts and spacers.For use with 1.060" diameter seat posts. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information

Seat post kit includes 15-7/8" rod and mounting hardware. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information UOM1 - KIT

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a polished finish.Switch wiring is not included. The master cylinder has a 3/4"...

Kit includes master cylinder with clamp, clutch handle with clamp, chrome switch housings, black switches, and bracket.Handlebar wiring harness and switch assembly in this kit includes wire...

Chrome contour hand lever set are designed for easy grip. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - SET

Polished smooth handlebar control switch coverIncludes rubber grommets in riser top vibration damper. Accepts 1/2" x 13 bolts sold separately. Fits:FL 1972-1981FX 1973-1981XL 1973-1981Additional...

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a chrome finish.Switch wiring is not included. The master cylinder has a 3/4" bore...

Nylon bushing for hand lever Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Polished clutch hand lever assembly.Order switch housing separately. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM

V-Twin - 26-2099 - Polished Handlebar Master Cylinder AssemblyDescriptionPolished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all...

V-Twin - 26-2097 - Black Handlebar Master Cylinder and Clutch Lever AssemblyDescriptionBrake master cylinder has a 3/4" bore and includes the brake lever, reservoir cover, switch housing and all...

V-Twin - 26-2093 - Handlebar Control Kit BlackDescriptionBlack handlebar control kit includes black master cylinder, chrome brake and clutch levers, black switch housings and wired switches.The...