1978

V-Twin - 26-0939 - Narrow Bar Riser KitDescriptionNarrow bar riser kit features a polished lower riser mount and top clamp.Mounts to all top trees with 3-1/2" center to center riser holes. Fits:FX...

V-Twin - 26-0938 - Narrow Bar Riser KitDescriptionNarrow bar riser kit features a black lower riser mount and top clamp.Mounts to all top trees with 3-1/2" center to center riser holes. Fits:FX...

V-Twin - 26-0935 - Narrow Bar Riser KitDescriptionNarrow bar riser kit features a chrome lower riser mount and top clamp.Mounts to all top trees with 3-1/2" center to center riser holes. Fits:FX...

Bates polished stainless steel hand lever assembly with ball end includes slotted lever bushing as original with 3/8" hole for brake or clutch. Fits:FL 1968-1984Additional Information

Black vertical switch housing only, will also accepts factory rocker switches and buttons. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Replica black clutch lever assembly for 1973-81 models. The clutch lever assembly comes complete with a black lever bracket, an alloy lever, pivot pin and anchor pin.*NOTE: Order switch housings...

Polished handlebar switch housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM

Black handlebar plain switch housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Black clutch lever mount Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM No.38608-72

Master cylinder has a 3/4" bore and includes the brake lever, stop light switch, reservoir cover, and all internal components.Accepts a 10mm banjo bolt. Fits:XL 1972-1981FL 1972-1981FX...

Chrome angle fitting for the brake hose to the front master cylinder. Fits:XL 1972-1981FL 1972-1981Additional Information OEM No.43307-78

Front master cylinder plunger assembly hardware only. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - KIT

Wide hand levers are formed to make them easier and more comfortable, for use on big twin models.Set of two. Lever shape is similar to those found on the 1996-up motorcycles. Can be used on 1972-1981...

3/4" handlebar master cylinder rebuild kit includes the plunger hardware. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM

Hand lever pivot pin set consists of one pin, one grease fit ting and one retaining ring. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information

V-Twin - 26-0540 - Top Riser Clamp Set ChromeDescriptionChrome billet top handlebar clamp set is a curved 2 piece design. For riser that accepts the 1 piece clamp.Set of two. Fits:FXST 1984-UPFXR...

Replica chrome clutch lever assembly for 1973-81 models. The clutch lever assembly comes complete with lever bracket, lever, pivot pin and anchor pin.*NOTE: Order switch housings separately. Fits:FL...

Polished hand lever is clutch or brake type. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Chrome hand lever is clutch or brake type Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Polished brake hand lever. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Chrome brake hand lever Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Smooth chrome handlebar control switch housing.Housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome vertical switch housing only, will also accepts factory rocker switches and buttons.. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome clutch hand lever bracket.Order switch housing separately. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM No.<

Pivot pin and bushings for hand lever. Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Master cylinder assembly includes the brake lever, stop light switch, reservoir cover and all internal components. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Polished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all internal components assembled. Fits:XL 1972-1981FL 1972-1981FX...

Master cylinder has a 3/4" bore and includes the brake lever, stop light switch, reservoir cover, and all internal components. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

V-Twin - 26-0453 - Cutout Design Riser Top Clamp BlackDescriptionBlack cutout design handlebar top clamp mounts with 4 5/16" screws on existing risers. Fits:FXST 1984-UPFXR 1982-1994FX 1973-1984XL...

V-Twin - 26-0451 - Cutout Design Riser Top Clamp ChromeDescriptionChrome cutout design handlebar top clamp mounts with 4 5/16" screws on existing risers. Fits:XL 1974-UPFX 1985-UPFX...

V-Twin - 25-2132 - 1-1/8 inch Riser Set ChromeDescriptionChrome 1-1/8" riser set with finned riser cap and screws.Use with 1/2" x 13 mount bolts which are sold separately. Fits:FX 1977-1984XL...

1" drag handlebar without indents and without knurls features a black finish with 30  bends. Fits:XL 1974-1981FL 1974-1981FX 1974-1981Additional Information

Cover set is stainless steel and 6-5/8" overall length. Use with 1/4-28 x 5/8" allen socket cap. Mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL...

Tweek bar polished 41mm fork brace is a 2 piece design which clamps directly to fork tube.The distance center to center measures 10". Fits:FXDWG 1999-2005FXWG 1980-1986FXST 1984-2013FLH...

Chrome handlebar riser cover has a hole for steering damper control. Fits:FL 1960-1979Additional Information OEM No.56589-60

Stainless steel fork slider cover set is stock length 6-5/8" and mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information

Cover set is chrome and 6-5/8" overall. Mount holes measure 1/4"x 28 thread.Use with 1/4-20 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

Fork assembly 41mm with chrome sliders for single disc applications.Fork assembly 41mm with chrome sliders is single disc model which accepts large banana caliper to accept 10" disc. Assembly...

Fork neck cup kit includes 2 chrome cups, 2 tapered bearings , and 2 dust shields.Used to convert ball bearing style cups to Timken tapered type. Fits:XL 1978-1981Additional Information

Stainless steel top triple tree cover has a measurement of 3-1/2" center to center. Fits:FL 1960-1984Additional Information OEM No.45741-60