1978

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

Raw alignment clips are for hinged rear fenders, to be spot welded on the front portion of the fender.Sold as a pair. *NOTE: Used to align and hold the rear tail flap edges in place. Fits:FLH...

Swingarm rear fender hinge features a raw finish. Hinge includes both halves with pin but without wire loom tail.Hinge halves are produced with correct pin and hinge offset for installing on original...

Raw steel wire loom fender strip for inside of the left FL rear hinged fender, radiused to fit the fender contour, and segmented to accept tail lamp wires.Must be spot welded to the left side or...

Wire loom spring clamp features a raw finish and is for use with the rear fender. To hold spring loom cover in place use #32-2036. Clamp is sold in a pack of 5.*NOTE: Must be spot welded on. Fits:FL...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Tool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL...

Bobbed rear fender kit includes a steel fender, cateye tail lamp, chrome tail lamp bracket, and chrome struts.We suggest pre fitting fender prior to painting. Order sissy bar components separately. ...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

V-Twin - 10-0003 - S&S Stock Bore Shovelhead Engine Crankcase SetDescriptionCrankcase set comes ready to assemble.S&S Crankcase Sets are shipped set-up with Timken left side bearing and race...

Drag Specialties - DS324120 - Battery Top Cover - '67-'78 XLCH,FXFeaturesReplacement battery top cover fits precisely and features vibration-absorbing cushionsReplacement Part for OEM...

Drag Specialties - DS324116 - Battery Top Cover - '65-'84 FLHFeaturesChromed replacement battery top cover fits precisely and features vibration-absorbing cushionsSpecs

Drag Specialties - DS317468 - Battery Strap - '73-'86 FX / '82-'97 XLFeaturesHigh-quality replacement battery strapsMeet or exceed OEM specificationsReplacement Part for OEM...

Drag Specialties - DS317463 - Battery Strap - '70-'78 FX/XLCHFeaturesHigh-quality replacement battery strapsMeets or exceed OEM specificationsSpecs

Drag Specialties - DS317465 - Battery Strap - F/'80-'92 FLT Features High-quality replacement battery straps Meet or exceed OEM specifications Specs

Drag Specialties - DS317462 - Battery Strap - '70-'84 FL/FLHFeaturesHigh-quality replacement battery strapsMeets or exceed OEM specificationsSpecs

Drag Specialties - DS317461 - Battery Strap - '67-'78 XLH Features High-quality replacement battery straps Meets or exceed OEM specifications Specs

Drag Specialties - DS310040 - Shock Top Cap - Chrome - '58-'64 FLFeatures3/8” longer than stock for a better fitCome with polished stainless steel clamps, screws and nutsFor all swingarm Harleys with...

Drag Specialties - DS253484 - Passenger Footpeg Mount - With Clevis - FL/FXFeaturesChrome passenger footpeg mounting plates and clevis replace the rear footrest bracketsAny male mount pegs can be...

Drag Specialties - DS246010 - Rocker Oil Line Set - Chrome - ShovelheadFeaturesChromed steel overhead oil line set includes crossover line and crankcase-to-rocker box lineComplete with fittings and...

Drag Specialties - DS243874 - 5" MPH FL-'36-'40 Style 1:1 Speedometer - White FaceFeaturesSpeedometers have 5/8"-18 threadSpeedometers include reset knob, unless notedMileage cannot be reset on...

Drag Specialties - DS243883 - 5" MPH FL-'62-'67 Style 1:1 Speedometer - Black FaceFeaturesSpeedometers have 5/8"-18 threadSpeedometers include reset knob, unless notedMileage cannot be reset on...

Drag Specialties - DS243817 - Mounting Kit for FL-Style SpeedometerFeaturesUsed for mounting speedometers found in cast dashesKit includes rubber grommets, pins and clipsReplacement Part for OEM...

Drag Specialties - DS240215 - Long Clutch Lever Rod End - '36-'78 FLFeaturesRod end for long "mousetrap" clutch lever rodReplacement Part for OEM Number(s):3691636Specs

Drag Specialties - DS222880 - Axle Cap - Front - Each - '73-'87 Harley-DavidsonFeaturesEach set includes caps for both the axle nut and axle head (where required), setscrews and hex key wrenchEach...

Drag Specialties - DS222777 - Steering Stem Bearing Adjusting Nut - '49-'17 BT Features Steering stem bearing adjusting nut Replacement Part for OEM...

Drag Specialties - DS195054 - Swingarm End Cap Adjusters - '73-'86 Big TwinFeaturesFeatures die-cast construction with highly chromed finishDelivers increased rear axle adjustmentFits models with...

Drag Specialties - DS190750S - Bolt Set - Cam/Primary/Sprocket Cover - Socket-Head/Smooth - '77-'85 SportsterFeaturesReplacement hardware for cam, primary and sprocket coverIncludes oil check...

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24010851 - Screws with/Washers - Damper TubeFeaturesKit includes two black socket-head bolts and two copper washersReplacement Part for OEM Number(s):4540575ASpecs

Drag Specialties - 24010850 - Board Mount Screws with Nuts - FrontFeaturesHas all required hardware for mounting driver floorboards to the mount bracketsIncludes four shouldered bolts and four...

Drag Specialties - 21130793 - AGM Battery - YTX20H FTFeaturesPremium-quality, maintenance-free batterySpecial absorbed-glass mat battery eliminates water lossBattery seals to prevent water lossHolds...

Drag Specialties - 21130780 - Battery - YTX20HBSFTFeaturesSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology delivers higher...

Drag Specialties - 21130669 - Black Battery Cable Set - '65-'84 FLFeaturesBlack cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and...

Drag Specialties - 21130496 - Battery Cover - Raised - BlackFeaturesFeatures precise formed covers for sealed and conventional batteriesThe use of AGM sealed maintenance-free batteries requires...

Drag Specialties - 21130216 - Battery Kit - CHD4-12FeaturesMSDS Migration DataDrag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as...