1980

LA Choppers - County Brake Pedal fits '80-'23 Touring and Softail Models Available in your choice of a raw, black or chrome finish. Features Machined billet aluminum brake pedal for Touring/Softail has an aggressive yet subdued look Stock length,...

S&S Cycle - Stock Bore 80" Cylinder and Standard Compression Piston Kit fits '78-'84 Shovelhead Engines This Kit is built to replace the cylinders and pistons of an 80" Shovelhead engine whilst maintaining the stock compression ratio of 8:1. It...

S&S Cycle - 3⅝" Big Bore Cylinder & Big Bore Piston Kit fits '66-'84 Shovelhead Engines This kit can be used to construct an 88" engine, or to replace the cylinders and piston in an engine with an existing S&S® stock bore stroker kit...

S&S Cycle - Retro Top-End Conversion Kit for 3.625" Bore Cylinders fits '66-'84 Shovelhead Engines Your Shovelhead will achieve the ultimate blast-from-the-past appearance of a Panhead with this Retro Top-End Conversion Kit from S&S Cycle! It...

S&S Cycle - Retro Top-End Conversion Kit for Stock Bore Cylinders fits '66-'84 Shovelhead Engines Your Shovelhead will achieve the ultimate blast-from-the-past appearance of a Panhead with this Retro Top-End Conversion Kit from S&S Cycle! It...

S&S Cycle - Super Stock™ Single Spark Plug Cylinder Heads - fits '79-'84 (Rubber Band Intake) 3 ⅜" Bore Cylinders Heads come completely assembled with valve seats, valves, guides, seals, .590" lift valve springs, collars and valve...

S&S Cycle - Super Stock™ Dual Spark Plug Cylinder Heads - fits '79-'84 (Rubber Band Intake) 3 ⅜" Bore Cylinders Heads come completely assembled with valve seats, valves, guides, seals, .590" lift valve springs, collars and valve...

Saddlemen - Profiler Lattice Stitch Seat fits '79-'03 Harley Sportster Models Trying to keep a low profile? Saddlemen's Profiler Lattice Stitch Seats are slammed feature narrow styling, a thin profile and low riding height. The lattice stitch (LS)...

Saddlemen - Profiler Basket Weave Seat fits 3.3 Gal Tank '79-'03 Harley Sportster Models Trying to keep a low profile? Saddlemen's Profiler Basket Weave Seats are slammed two-up seats that feature narrow styling, a thin profile and low riding height...

Saddlemen - Profiler Tuck N' Roll Seat fits '79-'03 Harley Sportster Models Trying to keep a low profile? Saddlemen's Profiler Tuck N' Roll Seats are slammed two-up seats that feature narrow styling, a thin profile and low riding height. These...

Hofmann Designs - H/D Billet Brake Pedal Pad - Raw fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Fits factory brake arms on 1980-2023 FLH models Lightweight with a sleek custom appeal Proudly Made in the...

Hofmann Designs H/D Billet Floorboards - Raw fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Better design for additional durability Lightweight with a sleek custom appeal Proudly Made in the USA Fitment 2022 - FLHC...

Hofmann Designs H/D Billet Floorboards - Black fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Better design for additional durability Lightweight with a sleek custom appeal Proudly Made in the USA Fitment 2022 - FLHC...

Hofmann Designs - H/D Billet Brake Pedal Pad - Black fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Fits factory brake arms on 1980-2023 FLH models Lightweight with a sleek custom appeal Proudly Made in the...

Pro-One - Pro-Board Floorboards fits '84-'21 Touring Models The Pro-Board Floorboards are designed from CNC-machined from Billet 6061 Aluminum and measure 12" long and 5" wide. They have a lightweight thin tapered design and come with set screw traction...

Performance Machine - Superlight Driver Floorboards fits Harley Touring Models Features CNC-machined from billet aluminum Matching passenger floorboards For use with stock H-D floorboard mounts Made in the U.S.A.  

Drag Specialties - Clutch Shell fits '70-'E84 Big Twin Chain-Drive Models  Sold each. Replaces OEM#37702-70A. Features Replacement clutch shell with starter ring gear Fitment 1984 Harley-Davidson Electra Glide Special...

Drag Specialties - Pressure Plate Fits '41-'E84 Big Twin Models Sold each. Features Stamped steel construction Designed for use with five-stud clutch hubs Fitment 1984 Harley-Davidson Disc Glide FXRDG 1984 Harley-Davidson Softail Standard FXST ...

Drag Specialties - Matte Black 1" Dual Cable Rail Grips Get a grip with the Matte Black Rail-Style Handlebar Grips from Drag Specialties. The grips are made for handlebars 1" in diameter. 

LA Choppers Kage Fighter Handlebars Chrome Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch on-center...

Drag Specialties Muffler Support for Harley Sportster '80 to Early '84 Drag Specialties Muffler Support for Harley Sportster '80 to Early '84 replaces Harley-Davidson OEM part number 65599-80A. 1" OD steel tubing Made in the U.S.A. Fitment: ...

Paughco Rear Heat Shield for Drag Pipes (DBC-2620) This heat shield is made for use with the Paughco Drag Pipes Fits Harley 70-84 FX Models w/ Swingarm Frame (DBC-2620).

Paughco Rear Heat Shield This heat shield is made for use with the Paughco 1-3/4" Drag Pipes for FL Models (DBC-2619)

Paughco Front Heat Shield This heat shield is made for use with various Paughco brand exhaust systems.

Paughco Rear Heat Shield This heat shield is made for use with various Paughco brand exhaust systems.

Paughco - 1-3/4" Muffler Pipes W/ Tapered End - Fits Harley 70-84 FL Models w/ Electric Start These muffler pipes by Paughco measure 38" in length, 1-3/4" in diameter. The pipes are available with a tapered end. Heat shields are available...

Paughco Front Heat Shield This heat shield is made for use with various Paughco brand exhaust systems. Fitment: YearMakeModel 1979 - 1980 Harley-Davidson 1200 Fat Bob - FXEF 1977 - 1979 Harley-Davidson 1200 Low Rider - FXS 1971 - 1978...

S&S Kick Starter Cover Kit Fits Harley FLH 1936-1987, FXST 1984-1987, FX 1971-1986 Models S&S's Kick Starter Cover are reproductions that are as close as possible to OEM kick starter covers with some internal improvements. Composed of CNC...

Colony Filler/Clutch Plug fits '77-'85 XL The Colony filler/clutch plug is a chrome cap for transmission filler/clutch adjustment holes on non-vented Sportster primary covers. This plug has a hex style head and was made right here in the U.S.A. This is a...

Drag Specialties - Mini King and Queen Seat fits '58-'84 FL/​FLH, '66-'84 FX & '80-'84 FXWG Models The Drag Specialties Mini King and Queen seat provides a vintage look with a new and improved fit. It is molded from polyurethane foam and covered...

Spyke Supertorque Starters Looking for superior cranking torque? Starters from Spyke are exactly what you need. Requiring only a small amp draw, there's no need to buy a high-amp battery. Available in chrome, black, or polished finish and super easy to...

The HardDrive starter clutch is a durable, high quality clutch. Developed using special metals, high tempature springs, and special hardness coated cam and rollers. Clutches come with heavy duty bearings and hardened intermediate gear Fitment: '65-'88...

Colony - 8144-34 Cadmium Stock Engine Case Bolt Kit fits '79-'84 FX/FL, '84-'95 FXST, '86-'95 FLST Models Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FLT 1979-1995 FX 1979-1984 FXR 1982-1994 FXST...

Colony - 9212-16 Cadmium Headbolt Kit fits '73-'85 Sportster Models Headbolt kit with a cadmium finish. Fitment: XL 1973-1985

Progressive Suspension - Heavy-Duty Fork Spring Kit fits '00-'13 Harley Touring Models Fits: '00-'01 FLT/FLHT/FLTR, '94-'13 FLHR, '06-'13 FLT/FLHT/FLTR (all except H-D FL Trike) Features: Heavy-duty version of the Progressive Suspension fork...

Joker Machine - Points Cover fits '04-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S Models) - Anodized Black This cover is available in your choice of a finned or smooth finish. Features Include mounting screws Made in the U.S.A...

Biltwell - Tracker 1" Handlebars The Tracker bars look great on dirt-track inspired custom builds. They are available in your choice of a chrome or black electroplated finish in both smooth and slotted options. Please Note: The only Biltwell Handlebars...

Pro-One - Riser Bushing Kit fits '73-'13 Softail, FX, FXR, Dyna, XL Harley Davidson - Silver Features Kit contains high-quality polyurethane bushings that reduce handlebar slop & vibration Includes CNC machined billet aluminum caps Sold in...

Thrashin Supply - P-54 Extra Grip Front/Rear Footpegs Thrashin's P-54 Extra Grip Front/Rear Footpegs are 2.25" Wide Tapered Platform pegs designed with grip surfaces that have a slight radius for improved shifting and braking whilst maintaining the...

Deadbeat Customs Tracker High Handlebars - Red These tracker handlebars are made from .120" chromoly steel tubing and come in a bright red powdercoat finish. Dimpled for stock Harley Davidson controls (Externally Wired). Slotted for Throttle By Wire...