1980

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits Front Wheel '73-'84 FL, Rear Wheel '73-'84 FL, '73-'81 FX Models (OEM #40908-81) Features: Uses OEM mounting hardware; designed to use...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '78-'83 FX, '78-'83 XL Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors

Drag Specialties - 40 Spoke Chrome Laced Wheel 19" x 2.5" fits '78-'83 FXR/FX, '78-'83 XL (Dual Disc (OEM #43341-78)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware;...

V-Twin - Frame Mount Solo Seat fits '70-'84 FX, '65-'84 FL Models - Black Vinyl Frame mount vinyl solo seat is equipped with molded high density foam padding and a plastic seat pan. This solo seat...

V-Twin - AEE Shock Set with Covered Springs fits '73-'84 FX '73-'84 FL Models (OEM #54500-73A) AEE chrome 12" shock set comes with full covered springs. The inner diameter of the top eyelet is .512"...

V-Twin - MCM FXE Goose Drag Pipe Set fits '70-'84 FXE Model - Chrome Chrome goose style drag pipes feature retro chopper styling in 1-3/4" diameter, with channel mounts and is 35" long with slash cut...

Chrome drag pipe set slash cut style with channel mounts has a 1-3/4" diameter X 38" long. Order channel mounting bracket and heat shields separately. Sold in a quantity of 2.  Fitment: FX...

V-Twin - Chrome 2 into 1 Exhaust Header Set fits '70-'84 FL, '71-'84 FX Models Chrome 2 into 1 exhaust header pipe set is for use with forward controls only. Set includes 12mm oxygen sensor bung. The...

Shovelhead shotgun exhaust straight pipes are for FX-FL model engines and features a chrome finish. *Note: For nose cone or flat side Shovelhead applications with forward brake controls. May not fit...

Colony - 8769-3 Front Axle Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut,...

Colony - Pushrod Kit fits '57-'85 Sportster w/ Solid Lifters (OEM #17904-57) Features: Aircraft-grade aluminum tubing Heat-treated steel tips

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips

Colony - Cylinder Base Nut Kit fits '78-'84 Big Twin Models (OEM #16838-78) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A.

Drag Specialties - Chrome Master Cylinder Cover fits '72-'81 Big Twin, '73-'81 Sportster Models (OEM #45012-72, 45057-72) Features: Chrome finish Include gasket

Drag Specialties - Rear Master Cylinder Repair Kit fits '84-'85 FLT, 'L79-'82 FX/FL (Except FXWG), '79-'81 XL, '77-'78 XLCR (Kelsey), 3/4” bore (OEM #42374-77) Features: Rebuild kits fit a...

Drag Specialties - Front Master Cylinder Repair Kit fits '73-'81 Big Twin & Sportster 3/ 4” bore (OEM #45063-72) Features: Meet or exceed OEM specifications Fitment

Drag Specialties - Rear Master Cylinder Dust Boot fits 'L79-'84 FX Model (OEM #41764-79) Features: Replacement rubber boots for rear master cylinders Fitment

Custom Dynamics - 5.75" Pro Beam LED Headlamp (OEM #677002-48, 67757-92) Features: Low beam consists of three high-power advanced optical D lenses and a DRL High Beam keeps low beam illuminated...

Progressive Suspension - 944 Ultra Low Shocks fits '99-'23 Touring Model (Except H-D FL Trike) Features: Unique Ultra spring configuration provides the superb ride quality and suspension travel...

Drag Specialties - Oil Plug Temperature Gauge fits '66-'84 FX/FL/FXWG Models Features: Sensitive to oil temperatures up to 350°F Chrome gauge bezel For 66-84 FX, FL, FXWG (3 7/8”...

Drag Specialties - Replacement Oil Tank fits '65-'E82 FX/FL Models (OEM #62483-81) Features: Includes drain/fill plugs, cap assembly and gasket Approximately 3-quart capacity

V-Twin - 24 Tooth Compensator Sprocket Kit fits '70-'84 FL, '71-'84 FX Model Kit Includes: 24 tooth sprocket, retainer and cover assembly, a raw compensator sprocket cup, motor sprocket nut , a...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers,...

V-Twin - Chrome 35mm Fork Tube w/ 25-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models (OEM #45644-77) Fork tube set is 2" over stock length for XLH, XLXH, XLCR, 1983 XLX, XLS models and...

V-Twin - 23-1/4" Hard Chrome 35mm Fork Tube Set fits '76-'83 FX, '75-'83 XLCH/XLH Models Features: Hard chrome fork tubes are Showa type with a stock length of 23-1/4" Before installing, compare new...

Original Garage - 41mm Speed Fork Brace fits '13-Down Touring Model Introducing our Fork braces for H-Ds 13-down Touring models with stock 41mm front end. Carefully designed to improve your ride...

Colony - Rear Brake Disc Rotor to Hub Screw & Nut Kit fits '79-'91 FX, '79-'85 XL & '81-'84 FL Features: Zinc plated allen screws and locknuts Fitment

Colony - Allen Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if...

Colony - Seat Post Rod Assembly fits '48-'80 Big Twin Models (OEM #51634-36, 51661-36) Features: Made in the U.S.A. Replacement Part for OEM:

Colony - 9400-1 Chrome Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models

Colony - 8768-3 Axle Nut/Washer Kit fits '86-'91 Sportster; 5/8”-18 Thread (OEM #6653, 7038, 7813) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4"...

Colony - Zinc Speedometer Cable Clamp fits '61-'80 Big Twin, '61-'80 Sportster Models (OEM #67074-57A) Features: Complete reproduction of original H-D clamps Made in the U.S.A.

Colony - Jiffy Stand Pin and Screw Kit fits '57-'84 Sportster Models (OEM #1760B, 50090-53) Features: Replaces Jiffy stand pin and screw Made in the U.S.A.

Colony - Seat Post Nut Kit fits '36-'80 Big Twin Models (OEM #51674-25) Features: Seat post rod locknut and lockwasher Made in the U.S.A. <

Colony - Seat Tee Mount Kit for '48-'80 FL/​FLH (OEM #52092-34, 52096-34) Features: Reproduction of studs, nuts, seat height adjustment spacers, round head bolt and tapered washers to mount the...

Colony - Coil Mounting Stud Kit fits '56-'82 Big Twin Models (OEM #72341-56A) Features: Kit features two studs, two nuts, four internal star lock washers, and two flat washers Made in the U.S.A...

Colony - 8112-20 Chrome Transmission Kicker Cover Nut Kit fits '36-'84 Big Twin Models (OEM #7055, 7752, 7835) Features: Kits include (9) nuts, (9) flat washers, (1) nut and (1) washer Made in...

Colony - 8773-12 Cadmium Footboard Hinge Bolt Kit fits '49-'81 FL/​FLH Models (OEM #50635-14) Features: Kits include four shoulder bolts, with nuts, and lock washers

Colony - Upper and Lower Motor Mount Hardware fits '70-'84 Shovelhead Model (OEM #4401W, 4435W) Features: Includes one 7/16" - 20 x 1-1/2" bolt, one 7/16" - 20 nylock nut, three 5/16" OD x 7/16"...

Colony - 41mm Fork Tube Bolt Washers fits '78-'84 Wide Glide Model (OEM #5710) Features: Washer outside diameter is 41 mm Made in the U.S.A. Fitment: