Electra Glide Sport FLHS

Drag Specialties - Spark Plugs fits '75-'99 Big Twin Models (MID) The Drag Specialties Spark Plugs are a great choice for those looking to upgrade their '75-'99 Big Twin Models (MID). These

Flo Motorsports V5 Bagger Moto Floorboards fits Harley Touring Models Upgrade your Harley Touring model with the Flo Motorsports V5 Floorboards — built for riders chasing the perfect balance of...

V-Twin - Black Nose Cone Cam Cover fits '73-'93 Big Twin Models OEM #25268-84A V-Twin's Nose Cone Cam Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included...

Old-STF Cycle - Carb Support Bracket fits '66-'84 Shovelhead Features: Carburetor/intake support bracket for S&S carbs.  Requires a through case bolt.  Contrast cut 6061-T6 Aluminum Supports...

Drag Specialties - Cam Covers - Fits '93-'99 Evo Big Twin, '73-'92 Big Twin Drag has developed these cam covers out of durable, die-cast aluminum. They come in satin or gloss black and are super...

Belt Drives Ltd. - Competitor Clutch fits 1970 - 1983 Harley Big Twin Features nine springs and shoulder bolts for simple clutch spring adjustment Eliminates the outdated 3-stud clutch hub along...

V-Twin Jockey Shifter Control Kit Police Style - fits '79-'84 FL Police style jockey shift kit clamps to all front 1-1/8" down tubes for 4-speed rotary top. Kit includes a smooth gate without dents. ...

Drag Specialties - Spoon-Style Seat fits '54-'84 FX/FL/FLH & '80-'84 FXWG Models The Drag Specialties Spoon-Style Seat is made from flexible urethane foam and automotive-grade vinyl providing...

Paughco Transmission Mounting Plate repl. OEM #47968-36, 47698-65 For 4-speed transmissions in Paughco standard width swingarm and rigid frames (not Easyride frames), or stock HD swingarm and rigid...

Paughco Hanger Bracket Hanger bracket used for the Paughco 1-3/4" Drag Pipe for FL Models exhaust systems.

Paughco Floorboard Adapter for FL Drag Pipes This floorboard adapter is made to be used with the Paughco 1-3/4" Drag Pipes for FL Models (DBC-2619).

Drag Specialties - Complete Three- and Five- Stud Clutch Hubs fits '36-'E84 Big Twin Models These Stud Clutch Hubs are available with three or five studs; both options come complete with all of the...

Old-STF Cycle - Brass Rocker Box Split Oil Line Features: No hassle kit for Shovelheads 1966-84. Heavy 1/4" Brass oil lines are pre bent with all necessary fittings. These lines will eliminate...

Paughco Muffler Support Bracket Fits Harley 58-84 FX, FL Models This muffler support bracket is a direct replacement for stock support bracket. Features: Heavy-duty, heli-arc constructed...

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48 and 49-tooth. Features: Convert rear...

Drag Specialties - Predator Seat fits '54-'84 FX/FL/FLH &'80-'84 FXWG This low profile predator seat is a sleek looking seat and is molded with polyurethane foam promoting supreme comfort. Made with...

All Balls Racing - Swing Arm Bearing Kit fits '58-'85 Harley Big Twin Models (Except Softail) Features Contains all of the bearings, shafts, seals, and bushings required to build a swing arm to...

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was...

V-Twin - Chrome Battery Carrier Kit fits '80-'84 FXE, '81-'84 FLHS-80 Models (OEM #66191-80) Battery carrier kit fits stock frames with bracket and ISO mounts included as required. Unit is chrome...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch...

Drag Specialties - 10" Front Center Hub Mount Brake Rotor Shovelhead - Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Ground finish Drilled for better heat dissipation and improved...

Drag Specialties - Rear Axle Kit fits '80-'99 Touring Models (12.625") This kit's bright chrome finish on the axle and hardware will beautify your bike. NOTE: Rear axle length given is measured...

V-Twin - Black 7" LED Headlamp Unit W/ Turn Signal fits '94-'13 Touring Models This unit comes with an LED turn signal ring. NOTES: Requires 31-0080 mounting bracket for installation on 1999-2013 FLT...

Hofmann Designs - H/D Billet Brake Pedal Pad - Raw fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Fits factory brake arms on 1980-2023 FLH models Lightweight with a...

Hofmann Designs H/D Billet Floorboards - Raw fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Better design for additional durability Lightweight with a sleek custom...

Hofmann Designs H/D Billet Floorboards - Black fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Better design for additional durability Lightweight with a sleek custom...

Hofmann Designs - H/D Billet Brake Pedal Pad - Black fits '80-Up FLH Model Features: CNC machined from T6061 Billet Aluminum Fits factory brake arms on 1980-2023 FLH models Lightweight with a...

Drag Specialties - Clutch Shell fits '70-'E84 Big Twin Chain-Drive Models  Sold each. Replaces OEM#37702-70A. Features Replacement clutch shell with starter ring gear Fitment

Drag Specialties - Pressure Plate Fits '41-'E84 Big Twin Models Sold each. Features Stamped steel construction Designed for use with five-stud clutch hubs Fitment

Paughco Rear Heat Shield for Drag Pipes (DBC-2620) This heat shield is made for use with the Paughco Drag Pipes Fits Harley 70-84 FX Models w/ Swingarm Frame (DBC-2620).

Paughco Rear Heat Shield This heat shield is made for use with the Paughco 1-3/4" Drag Pipes for FL Models (DBC-2619)

Paughco Rear Heat Shield This heat shield is made for use with various Paughco brand exhaust systems.

Paughco - 1-3/4" Muffler Pipes W/ Tapered End - Fits Harley 70-84 FL Models w/ Electric Start These muffler pipes by Paughco measure 38" in length, 1-3/4" in diameter. The pipes are available with a...

Paughco Front Heat Shield This heat shield is made for use with various Paughco brand exhaust systems. Fitment YearMakeModel

S&S Kick Starter Cover Kit Fits Harley FLH 1936-1987, FXST 1984-1987, FX 1971-1986 Models S&S's Kick Starter Cover are reproductions that are as close as possible to OEM kick starter covers with...

Drag Specialties - Mini King and Queen Seat fits '58-'84 FL/​FLH, '66-'84 FX & '80-'84 FXWG Models The Drag Specialties Mini King and Queen seat provides a vintage look with a new and improved fit...

Spyke Supertorque Starters Looking for superior cranking torque? Starters from Spyke are exactly what you need. Requiring only a small amp draw, there's no need to buy a high-amp battery. Available...

The HardDrive starter clutch is a durable, high quality clutch. Developed using special metals, high tempature springs, and special hardness coated cam and rollers. Clutches come with heavy duty...

V-Twin - Chrome Petcock W/ Nut and 90° Left Outlet fits '75-'94 Big Twin & '75-'95 Sportster Models This petcock is designed to be used with stock gas tanks or custom tanks with a 22mm outside thread...

The Gasbox Voltage Regulator Mount: Stainless Steel 6 x 6 x 1 Made in the USA   Fitment: Fitment