1983

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH...

Top beaded windshield is short style. Fits:FLH 1949-1984Additional Information OEM No.58020-49A UOM1

Frame saver mounting kit for gas tanks must be welded to Big Twin stock or custom frames. Casting features provision for damper pin, as required on 1949-1984 Big Twins.*Note: Includes speedometer...

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Tool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL...

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Drag Specialties - DS280219 - 8-1/4" Turn Signal Bracket - '85-'90 FLTFeaturesMounting brackets are 4-3/4" shorter than stock bracketsGive the rear of the bike a sleeker look; uses stock mounting...

Drag Specialties - 24041047 - Speed Nut - 4-PackFeaturesOE replacementSpecsColor/FinishSilver<

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24010851 - Screws with/Washers - Damper TubeFeaturesKit includes two black socket-head bolts and two copper washersReplacement Part for OEM Number(s):4540575ASpecs

Drag Specialties - 24010850 - Board Mount Screws with Nuts - FrontFeaturesHas all required hardware for mounting driver floorboards to the mount bracketsIncludes four shouldered bolts and four...

Drag Specialties - 22100345 - 5" KPH FL-Style 2:1 Speedometer - '89-'95 Black FaceFeaturesSpeedometers have 12mm threadTo install speed heads on 47-67 FL, use cable adapter PART #2210-0062 (sold...

Drag Specialties - 21130793 - AGM Battery - YTX20H FTFeaturesPremium-quality, maintenance-free batterySpecial absorbed-glass mat battery eliminates water lossBattery seals to prevent water lossHolds...

Drag Specialties - 21130780 - Battery - YTX20HBSFTFeaturesSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology delivers higher...

Drag Specialties - 21130669 - Black Battery Cable Set - '65-'84 FLFeaturesBlack cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and...

Drag Specialties - 21130668 - Black Battery Cable Set - '82-'88 FXRFeaturesBlack cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and...

Drag Specialties - 21130496 - Battery Cover - Raised - BlackFeaturesFeatures precise formed covers for sealed and conventional batteriesThe use of AGM sealed maintenance-free batteries requires...

Drag Specialties - 21130216 - Battery Kit - CHD4-12FeaturesMSDS Migration DataDrag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as...

Drag Specialties - 21130212 - AGM Battery - YTX24HLBSFeaturesMSDS Migration DataSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology...

Drag Specialties - 21130298 - Battery Cover - Smooth - ChromeFeaturesFeatures precise formed covers for sealed and conventional batteriesThe use of AGM sealed maintenance-free batteries requires...

Drag Specialties - 21121204 - 32A Charging Kit - Black RegulatorFeaturesKit includes an encapsulated magnetic rotor, precision-wound stator and an 89-99 32A chrome voltage regulatorFeatures a thick ...

Drag Specialties - 21121071 - Regulator - BT '81-'88 - ChromeFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...

Drag Specialties - 21121070 - Regulator - BT '81-'88 - BlackFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...

Drag Specialties - 21120927 - Regulator Mount - Harley Davidson - BlackFeaturesAllows the regulator to be mounted down and back out of sightOptional 10-24 holes on back of mount for ground wireMade...

Drag Specialties - 21120824 - Regulator - XL '82-'84 - BlackFeaturesHigh-reliability voltage regulators feature rugged aluminum alloy constructionProvides accurately regulated voltage under all...

Drag Specialties - 21120782 - Regulator - Black - '81-'88 Evolution Big TwinFeaturesHigh-reliability 12 V voltage regulators feature rugged aluminum alloy constructionProvides accurately regulated...

Drag Specialties - 21120778 - Regulator - Chrome - '81-'88 Evolution Big TwinFeaturesHigh-reliability 12 V voltage regulators feature rugged aluminum alloy constructionProvides accurately regulated...

Drag Specialties - 21101333 - Starter Housing - '83-'85 FLT/FXRFeaturesSpecsTypeStarter

Drag Specialties - 21100327 - Starter SolenoidFeaturesDesigned with extra current capacity for starting high-compression motorsRecommended for use with Drag Specialties High Performance...

Drag Specialties - 21100225 - Starter - High Torque - BlackFeaturesFeatures 15% more power and torque than OEM unitsManufactured using heavy-duty armature commutators, large drive-end bearings and...