1984

FXR horn mount bracket is the later version with a zinc plated finish. Tech Notes: Suggested to use with #33-2116 Replica Replacement Horn Black Fitment: FXR 1984-1994

Exhaust bracket for FXR models features a raw finish. Support bracket is welded to the frame to house the isolator block available separately. *NOTE: Must order hardware separately. Fitment: FXR...

FXR exhaust mount bracket. FXR exhaust mount bracket is mounted with (2) 7/16-20x1* pivot bolt cap screws. Our bracket mounting block can be bolted on to the opposing side using (2) 5/16-24x 5/8...

Battery strap clamp for FXR models features a black finish. Includes nut that is welded in place. Use with 1/4 x 20 bolt 1-1/2 inch hex head and 1/4 x 20 jam nut. Fitment: FXR 1984-1988 FXR 1990-1994

FXR pipe bracket kit includes a raw weld on type bracket and an ISO mount block. *NOTE: Bracket must be welded on. Fitment: FXR 1982-1994

FXR chrome 35mm flat top stem nut fits 35 inch and 39 inch fork stems. Tech Notes: Suggested to use with #24-0827 Lower Triple Tree Chrome. Fitment: Fx 1978-1984 FXR 1982-1994 XL 1978-1987

Silver dash panel decal set. Sold as a 2 piece set. Fitment: FXR 1982-1994

Sold as a pair. Fitment: FXR 1982-1994

Rear axle adjuster has a 3/4 inch inner diameter and includes heavy pull blocks and two 1/4 inch-20 x 2 inch full thread allen cap screws. Fitment: FXR 1982-1994

WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to...

FXRP footboard control kit includes a brake pedal chrome footboard set zinc plated frame mount brackets and a heel-toe shifter lever. Fitment: FXR 1982-1994

FXR inner shift washer and seal kit is for the 1/2 inch diameter inner shift shafts. Sold as a 6 piece kit. Fitment: FXR 1982-1984

FXR shifter shaft bushing includes 4 o-ring alloy type with two bronze bushings on each end. Sleeve is used to replace the stock plastic part. Fitment: FXR 1984-1994

FXR shifter rod assembly features a zinc finish and includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1994

Zinc plated FXR pedal rod end 4 piece kit includes the rod end zinc clevis pin zinc 5/16 inch x 24 thread nut and a cotter pin. *NOTE: Measures 2-3/8 inch from the hole to the end of the thread...

FXR driver footpeg set features zinc plated peg shafts and includes the rubber set and mount bolt set. Sold as a pair. Fitment: FXR 1982-1994 XL 1986-2004

2023 New Production black kickstand is stock length and includes pin for FXR models. Fitment: FXR 1982-1990

FXR frame side cover set is constructed of black ABS plastic with vented panels. Sold as a pair. Requires (4) 1/4 inch-20 x 1-3/4 inch allen bolts and (4) 1/4 inch flat washers. Tech Notes: Required...

Axle spacer front for the right side and has an overall length of 1/2 inch. Measurements: Inner Diameter: 3/4 inches Fitment: FXD 1991-1996 FXR 1984-1994 XL 1986-2025

Kelsey type chrome master cylinder with 3/4 inch bore and has inverted flair fitting. Measurements: Outer Diameter: 2-1/4 inches Fitment: FL 1979-1985 FLH 1979-1985

Remote master cylinder reservoir chrome cover with a finned design. Fitment: FL 1979-1984 Fx 1979-1984 XL 1979-1981

This replaces the original plastic unit on the 1982-up models. Thread is 3/8 inch x 28 TPI. Holes on the back measure starting with the small one closest to the bottom and working to up: #8-32* 5/16...

Pro-One - Solid Riser Bushing Kit Features: CNC-machined from billet aluminum Removes handlebar slop associated with tall risers and handlebar setups

Pro-One - 41 mm Fork Tube Assemblies fits '00-'17 FXST/​FLST, '99-'05 FXDWG Models (Except FXSTD) Features: Assemblies come complete with fork tubes, springs, damping rods, bushings, clips,...

Pro-One - Strut LED Marker Light fits '00-'17 Softail Models Features: CNC machined from solid billet aluminum, carefully polished, then triple-chrome plated Include both smoked and amber...

James Gaskets - JGI-65834-68-A2 - Copper Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Copper Exhaust Port Gasket from...

James Gaskets - 65834-68-SC2 - Steel Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Steel Exhaust Port Gasket from...

James Gaskets - 65834-68-STD - 3 Bolt Standard Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. 3 Bolt Standard Exhaust...

James Gaskets - 65834-68-X-2 - Fire Ring Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Fire Ring Exhaust Port Gasket...

James Gaskets - JGI-65834-98-X2 - Knitted Wire Exhaust Port Gasket - Fits '66-'84 FX/FL Models - Pair Fits: '66-'84 FX/FL Models. Full year/model list is on the Fitment tab. Knitted Wire Exhaust Port...

James Gaskets - JGI-16776-63-X1 - .020" Front/Rear Metal Base Gasket with Outside Oilers - Fits '66-'84 Big Twin Models - Pair Fits: '66-'84 Big Twin Models. Full year/model list is on the Fitment...

James Gaskets - JGI-16776-63-XF - .030" Foamet® Front/Rear Base Gasket - Fits '63-'84 Big Twin Models - Pair Fits: '63-'84 Big Twin Models. Full year/model list is on the Fitment tab. .030" Foamet®...

James Gaskets - JGI-18633-48-KF - Tappet Block Gasket - Fits '48-'99 Big Twin Models (.020” Foamet®) - Pair Fits: '48-'99 Big Twin Models (.020” Foamet®). Full year/model list is on the Fitment tab...

James Gaskets - JGI-17536-70-X - Metal Rocker Cover Gasket With Beading - Fits '57-'85 Sportster Models - Pair Fits: '57-'85 Sportster Models. Full year/model list is on the Fitment tab. Metal Rocker...

James Gaskets Lower Rocker Cover Gasket - Left or Right for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Beaded paper lower rocker cover gasket...

James Gaskets MLS Head & Base Gasket Kit - Standard Bore for 1984-1999 Evo Big Twin Fits: 1984-1999 Evolution Big Twin, standard bore (0.045" steel head gaskets, steel base gaskets). Full year/model...

James Gaskets Primary Inspection Cover Seal for 1980-1984 FLT/FXR Fits: 1980-1984 FLT/FXR. Full year/model list is on the Fitment tab. Molded rubber on steel inspection cover seal for the early...

James Gaskets Oil Deflector Plate Seal for 1965-1984 Panhead & Shovelhead Fits: 1965 Panhead and 1965-1984 Shovelhead. Full year/model list is on the Fitment tab. Molded rubber and steel, double-lip...

James Gaskets Wheel Bearing Oil Seals - 0.410" for 1984-1999 Evo Big Twin & 1984-1985 Sportster Fits: 1984-1999 Evolution Big Twin and 1984-1985 XL (catalog), with more models listed on the Fitment...

James Gaskets Top Rocker Cover Washer Set - Copper for 1984-1999 Evo Big Twin Fits: 1984-1999 Evo Big Twin. Full year/model list is on the Fitment tab. Copper washers for the top rocker cover bolts...