1984

Jims - 33096-54B Kickstarter Shaft fits '36-'86 Big Twin Models Features: Precision-machined replacement shaft Made in the U.S.A.

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models Features: Use to install inner cam bearings Made in the U.S.A.

Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to re

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 97178-71 Clutch Spring Compressor fits '71-'E84 Sportster Models (OEM #97178-71) Features: Used to remove or install clutch components Made in the U.S.A.

Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm...

Jims - 33428-78 Main Drive Gear Bearing Tool fits '79-'84 4-Speed Big Twin Models Features: Use to install the main bearing (Harley-Davidson® #8905) to the correct depth Made in the U.S

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length H

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of inj

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal<

Jims - 96385-78A 4-Speed Shift Fork Gauge fits '79-'85 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A.

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again

Custom Cycle Engineering - 35 mm Ultra Chrome Showa Fork Tubes fits '84-'86 FXRS, '86 FXR, '85 FXSB/FXE/F, '76-'83 FX/​FXR, '75-'83 Sportster Models (OEM #45407-73, 45644-77) Features: Designed...

Custom Cycle Engineering - 41 mm Ultra Chrome 24.75" Fork Tubes fits '80-'E84 FXWG Model (OEM #45417-80) Features: Designed to fit a wide variety of models Made in the U.S.A

Custom Cycle Engineering - 35 mm Ultra Chrome Fork Tubes fits '84-'85 Sportster Models (OEM #45407-83) Features: Designed to fit a wide variety of models Made in the U.S.A

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide...

Drag Specialties - Oil Filter with Nut fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63796-77A, 63805-80A, 63806-83) Features: High-quality spin-on filters are a...

Belt Drives Ltd. - 1-1/2" 4-Speed Belt Drive fits '70-'83 Big Twin w/ Rear Chain Drive Features: 1-1/2" and 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set...

Belt Drives Ltd. - 1-5/8" 5-Speed Belt Drive fits '79-'83 Big Twin w/ Rear Chain Drive Features: 1-1/2" and 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set...

Namz - Speedometer Drive Block-Off Kit Features: Kit includes polished stainless steel block-off plate, gasket,10 x 24 stainless steel button-head screw and lockwasher Easy to install

S&S Cycle - Standard Band Type Intake Manifold - fits L78-'84 Shovelhead (w/o VOES) Standard Band Intake Manifold - Super G - Shovelhead Compatible with S&S Super G carbs, Available for stock...

Colony - Fork Drain Screws fits '94-'98 FXD, '84-'94/'99-'00 FXR Models (OEM #45790-80, 45996-73) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Drag Specialties Round Tapered Sissy Bar - Chrome fits '79-'85 Sportster Models - 11.49"H x 8.25"W Available in 11.49"H x 8.25"W Features: All sissy bars are constructed from 9/16" solid steel

Drag Specialties - Sissy Bar Side Plates fits '58-'84 FL/​FLH Models - Chrome Features: Side plates feature raised accent on select applications Easy, bolt-on design - no drilling required

Drag Specialties - Sissy Bar Side Plates fits '84-'99 FXST, '80-'86 FXWG Models - Chrome Features: Side plates feature raised accent on select applications Easy, bolt-on design - no drilling...

Feuling - ARP 12-Point Evolution External Fastener Bolt Kit fits '85-'99 Big Twin Models This kit features quality, 12-point heat-treated 8740 chrome moly-steel bolts with a black oxide finish...

LA Choppers - County Line Billet Floorboards fits '99-'23 Touring & Dyna Models These machined billet aluminum floorboards fit all baggers, including Dyna Switchback models. They are built for...

LA Choppers - County Shifter fits '99-'24 Touring, '09-'25 H-D FL Trike & '00-'17 Softail Models This shifter is a precise replacement for the stock shifter that works with mid controls. Available...

Thrashin Supply - Expedition Saddlebag Thrashin Supply's Expedition Saddlebag is compatible with most stock tail light and blinker assemblies, but these assemblies need a minimum of 15" between the...

Thrashin Supply - Essential Saddlebags Features: Made of 1680D Denier Ballistic Nylon Lightly Structured to hold shape Easy on, Easy off i