1984

Rear tank frame mount tabs. Fits:FL 1941-1984EL 1936-1947U 1937-1948Additional Information UOM1 - SET

Weld on frame footpeg mount without thread.Mount can be welded to 1958-1977 swingarm frames to utilize the stock FXE mount and raise the peg position. Sold as a pair. Fits:FX 1971-1978FL...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes...

FXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information <

Beaded windshield is a fixed mount type which comes completely assembled.Includes beaded windshield top and an adjustable lower windshield to fit FL aluminum headlamp cowl assembly. The center bolt...

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH...

Top beaded windshield is short style. Fits:FLH 1949-1984Additional Information OEM No.58020-49A UOM1

Frame saver mounting kit for gas tanks must be welded to Big Twin stock or custom frames. Casting features provision for damper pin, as required on 1949-1984 Big Twins.*Note: Includes speedometer...

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

V-Twin - 50-1910 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:FXST 1984-1999FLST 1986-1999 Except...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Chrome front fender mount kit attaches fender to original style assembly. Fits:FXST 1984-1993Additional Information UOM1 - KIT

Tool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL...

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Drag Specialties - DS280219 - 8-1/4" Turn Signal Bracket - '85-'90 FLTFeaturesMounting brackets are 4-3/4" shorter than stock bracketsGive the rear of the bike a sleeker look; uses stock mounting...

Drag Specialties - DS243884 - FL-'62-'67 Style 2240:60 Speedometer - Black/White FaceFeaturesQuality 5” speedometer heads are available in 2240:60 ratiosFeatures 12 mm thread and comes with a...

Drag Specialties - 24041047 - Speed Nut - 4-PackFeaturesOE replacementSpecsColor/FinishSilver<

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24020073 - Head Bolt Covers - Chrome - 4 PackFeaturesPolished and buffed to a mirror-like finishQuality chrome plated steel bolt coversMade in the USASpecs

Drag Specialties - 24010851 - Screws with/Washers - Damper TubeFeaturesKit includes two black socket-head bolts and two copper washersReplacement Part for OEM Number(s):4540575ASpecs

Drag Specialties - 24010850 - Board Mount Screws with Nuts - FrontFeaturesHas all required hardware for mounting driver floorboards to the mount bracketsIncludes four shouldered bolts and four...

Drag Specialties - 22100345 - 5" KPH FL-Style 2:1 Speedometer - '89-'95 Black FaceFeaturesSpeedometers have 12mm threadTo install speed heads on 47-67 FL, use cable adapter PART #2210-0062 (sold...

Drag Specialties - 21130793 - AGM Battery - YTX20H FTFeaturesPremium-quality, maintenance-free batterySpecial absorbed-glass mat battery eliminates water lossBattery seals to prevent water lossHolds...

Drag Specialties - 21130780 - Battery - YTX20HBSFTFeaturesSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology delivers higher...

Drag Specialties - 21130669 - Black Battery Cable Set - '65-'84 FLFeaturesBlack cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and...