1994

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to re

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Custom Cycle Engineering - 39 mm Hard Chrome Standard Fork Tubes fits '99-'05 Dyna & '87-'07 Sportster Models (Except XL1200S, '00-'05 FXDX/​FXDXT) Features: Finish is electrolyzed for increased...

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring...

Custom Cycle Engineering - Adjustable Engine Mount fits '99-'17 Dyna Models (OEM #47226-93, 47226-99, 47226-90A) Features: Replace stock front engine bracket with custom slotted bracket with...

Custom Cycle Engineering - Disc Spacer for Dual-Disc Applications on '84-'98 Applications Features: Allows the use of narrow glide 19" or 21" wheel (found on FXD and XL models) to be installed in...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide...

Custom Cycle Engineering - 39 mm Ultra Chrome Fork Tubes fits '99-'05 FXDC/​FXDL/FXD & '87-'07 Sportster Models (Except XL1200S, '00-'05 FXDX/​FXDXT (OEM #45360-90)) Features: Designed to fit a...

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

Colony - 9810-4 Chrome Rear Axle Spacer Kit fits '87-Up FXST Model Chrome rear axle spacer kit stock include left side spacer adjuster collars and castle nut Fitment: FXST 1987-UP Rear Fitment

Colony - 9826-4 Chrome Front Axle Spacer Kit Smooth Style fits '84-Up FXST Model Chrome front axle spacer kit smooth style will fit 1984-up FXST. Kit inlcudes washers and nuts Fitment: FXST...

Colony - 9854-28 Chrome Upper and Lower Engine Bolts fits '84-'99 FXST, '86-'99 FLST Models Upper and lower engine mount bolts with a chrome finish  Fitment: FXST 1984-1999 FLST 1986-1999

Colony - 9873-16 Inner Primary Mount Kit fits '94-'99 FXST/FXD/FLST Models Inner primary mount kit contains all stock type hardware for mounting aluminum inner chain housing. Fitment: FXST...

Colony - 9904-17 Inner Primary Mount Kit fits '86-'94 FXR, '86-'00 FLT Models Inner Primary mount kit contains all stock type hardware for mounting aluminum inner chain housing Fitment: FXR...

Colony - 9910-4 Fork Slider Drain Screws fits '82-'86 FXR, '73-'84 FX, '73-Up Sportster Model (OEM #45790-80) Fork slider drain screws are supplied with washers and are s old in pairs...

Colony - 9964-2 Chrome Washer Fork Tube Plug fits '84-Up FXST, '77-'86 FX, '86-Up FLST Models (OEM #5710) Chrome fork tube plug washer Fitment: FXST 1984-UP FX 1977-1984 FLST 1986-UP FX...

Colony - 9976-2 Fork Triple Tree Top Nut Kit fits '86-'94 FXR, '86-Up Sportster Models Bolt and washer kit, zinc plated fits 1986-up XL FX FLST Fitment: XL 1986-UP FXR 1986-1994

Colony - 9977-1 Chrome Fork Triple Tree Stem Cap fits '84-Up FXST,  '86-'94 FXR, '86-Up FLST/Sportster Models Chrome fork triple tree stem cap Fitment: FXST 1984-UP XL 1986-UP FXR...

Colony - 9997-3 Chrome Rear Axle Spacer Kit fits '86-'99 Sportster Model Chrome rear axle spacer smooth style fits 1986-1999 X. Kit includes castle nut and adjuster collars. Spacer is 3/4" inner...

V-Twin - CV Carburetor Fuel Mixture Screw fits '93-'06 FXR/FLT/FLST/FXST '88-'06 Sportster Models CV carburetor fuel mixture screw are extended length for easy accessability. For CV carburetors...

V-Twin - Spark Plugs Nickel fits '75-'85 FL/FX Models V-Twin performance spark plugs features a nickel core electrode for a longer service life, alloy housing, 95% pure alumia insulator and a heat...

V-Twin - Nickel Spark Plugs fits '75-'85 FL/FX Models V-Twin performance spark plugs features a nickel core electrode for a longer service life, alloy housing, 95% pure alumina insulator and a heat...

V-Twin - 52" Inline Spring Fork Assembly fits Custom Application Unit features chrome springs, and rockers, front and rear leg in black. This 52" assembly is 20" over stock length. Includes inner and...

V-Twin - 52mm GPS Speedometer Kit fits '90-'17 FXD, '88-Up Sportster Models GPS 52mm speedometer kit includes 0-120mph GPS triggered speedometer in chrome housing. Mounts to FXD and XL fork stem...

V-Twin - Ironhead Hardware Kit fits '57-'03 Sportster Model Sportster hardware kit includes zinc plated hex bolts and nyloc nuts with a cadium hex type front motor mount kit. For installing 1957-1985...

Spyke - Starter Jackshaft Kit fits '99-'06 Twin Cam Models (Except '06 Dyna) - 10 Tooth Features: Complete assembly includes shaft extension, pinion gear, coupler, spring and clips Fitment

V-Twin - Retro Oil Tank Plug with Dipstick fits '70-'84 FL, '79-'03 Sportster Models Retro oil tank plug features a natural alloy finish. Includes a 2-1/2" long dipstick. Fits all push-in rubber plug...