Touring Electra Glide Classic FLHTC

Mustang - Passenger Seat w/ Backrest Receiver fits '99-'21 FLT/​FLHT/​FLTR/​FLHX/​FLHR Models Features: Passenger seat features marine-grade fiberglass baseplates with controlled density foam and expandable black vinyl cover Seat measures 13.5" W;...

Mustang - Plain Heated Touring Seat fits '99-'07 FLHT/​FLTR Models Features: Wire harness hooks to accessory port in front of battery; seat has power only when the ignition key is turned on and accessory toggle switch below the handlebars is flipped...

Mustang - Black Stitched Tripper™ Fastback Seat fits '99-'07 FLHT/​FLTR Models Features: Super clean, custom style and cut low for rider with good back support Tapered in back, yet still offers good passenger comfort Marine-grade fiberglass...

Mustang - Wide Tripper Seat fits '99-'07 FLHT/​FLTR Models Features: Features a sleek design accented with detailed stitch work Expanded vinyl cover Made in the U.S.A. Fitment 2003-2006 Harley-Davidson FLHTI Electra Glide...

Mustang - Black Stitched Tripper™ Solo Seat without Backrest fits '99-'07 FLHT/​FLTR Models Features: Detailed stitch work in the highly durable, synthetic glove leather cover Seat design lets you ride low and still be...

Mustang - Tripper™ Rear Pillion Pad fits '97-'25 Touring Models Features: Detailed stitch work in the highly durable, synthetic glove leather cover Seat design lets you ride low and still be comfortable Marine-grade fiberglass baseplate Made...

Mustang - Black Studded Wide Rear Seat fits '08-'21 FLHT/​FLHR/​FLTR/​FLHX Models Features: Expanded vinyl cover with a marine-grade fiberglass baseplate Available with or without driver backrests Made in the...

Mustang - Plain Sport Seat fits '99-'07 FLHT/​FLTR Models Features: Baseplate is open in middle to accept a Mustang or stock H-D driver backrest kit Seat nose is narrower than stock so riders can plant their feet on the ground Top covering made of...

Mustang - Day Tripper Seat fits '99-'07 FLHT/​FLTR Models Features: Detailed stitch work in the highly durable, synthetic glove-leather cover makes the DayTripper™ a real show winner Mustang's advanced comfort technology has been incorporated...

Mustang - Studded Regal Seat fits '99-'07 FLHT/​FLTR Models Features: Nose is narrower than stock; allows for optimum rider comfort and less knee bend These touring seats are the ultimate in design and cushioning Top covering made of...

Mustang - Wide Tripper™ Passenger Seat fits '08-'21 FLHT/​FLTRX/​FLTRU/​FLHX/​FLHR Models Features: Detailed diamond-stitch pattern, expanded vinyl cover Width 11.5" Made in the USA Fitment 2023 Harley-Davidson FLTRT Road Glide...

Mustang - Deluxe Super Touring Seat fits '99-'07 FLHT/​FLTR Models Features: Built-in driver backrest receiver for optional backrest (sold separately) Backrest fully adjustable and removable for easy folding and storage High-quality expanded vinyl...

James Gasket - Rocker Housing Gasket fits '99-'17 Twin Cam Models (OEM #16719-99A, 16719-99B) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the...

James Gasket - Rocker Cover Gasket fits '99-'17 Twin Cam Models (OEM #17386-99A) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and...

James Gasket - Primary Cover Gasket fits '99-'06 FLT Model (OEM #34901-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...

Jims - 5518 Shifter Shaft Bushing Tool fits '85-'16 FLT Touring w/ 5- or 6-Speed Transmission Features: Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove he inner primary Tools installs new bushings to...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...

Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/​FLHT/​FXR, '84-'99 Big Twins & '84-'00 FLHT/​FXR/​FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...

Jims - 1147 Alternator Rotor Puller fits '97-'06 Big Twin Models Features: A must-have tool for 45A charging systems; will also work on any Harley-Davidson® alternator system that has threaded puller holes Tool protects threads on sprocket shaft...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 1162 Caliper Piston Remover fits '00-'07 Big Twin & '00-'03 Sportster 4-Piston Front/​Rear Calipers Models Features: Prevents damage to pistons and cylinders when installing new seals and wipers Holds pistons square in their cylinder...

FLHRS Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models Features: Eliminates possible burring of plug caused by wrenches Used to remove and install top fork-tube plug Fits 41 mm forks Made in the U.S.A...

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools) Also used in Harley-Davidson® Twin Cam oil pump alignment...

Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly Made in the U.S.A...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...