Touring Electra Glide Ultra Classic FLHTCU

Aurora trim kit with chrome finish attaches to the Tour-Pak for a great custom look! Fits: FLHT 2006-2013 Additional Information UOM 1 - K

Tour-Pak luggage kit includes bottom and top luggage case manufactured from OEM grade materials with precision tooling in black.Direct bolt-on replacement for the OEM tourbox. Pre-drilled and pre-fit...

Tour-Pak hardware kit includes two latch and spacer sets with screws, two catch and backing plate sets with rivets and two upper and lower hinges with backing plates and rivets. Hinge pins and screws...

Set includes right and left side lids without speaker cutouts.Pre-drilled and pre-fit for ease of installation. The process of injection created smooth inside and outside surfaces. All pieces are...

Left side saddlebag is plastic with primed finish, ready for paint.Order gasket set, hinge set and lid separately. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The...

Right side saddlebag is plastic with primed finish, ready for paint.Order lid and gasket separately. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of...

Left side saddlebag lid, without speaker cutout, has a plastic primed finish, ready for paint.Order gaskets and hinge set separately. Pre-drilled and pre-fit for ease of installation. The process of...

Right side saddlebag lid, without speaker cutout, has a plastic primed finish, ready for paint.Order gasket set and hinge set separately. Pre-drilled and pre-fit for ease of installation. The process...

Deep style raw plastic hinged saddlebag bottom set only. Saddlebag bottoms have a 3" stretch and are notched for muffler body on the under side.This saddlebag set is a perfect fit and has all...

Tour-Pak luggage plastic case top is for FLT models.Order bottom, hardware, and gaskets separately. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of...

Tour-Pak luggage case with plastic bottom is for FLT models.Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of injection created smooth inside and outside...

Black guard set includes right and left rails to protect the saddlebags.Black saddlebag guard set is a stock replacement on all 2009-up FLHX, FL RU and FLTRX. Can also be used on all 2009-13 FLT...

Black heavy duty construction is 15% thicker than stock for added support to prevent breakage.Mounts with stock hardware. ...

Tour-Pak hinge kit. Fits:FLT 1987-2013Additional Information UOM1 - KIT ManufacturerV-Twin

Tour-pak hardware kit includes locks for Tour-pak and two saddlebags that are keyed alike. Fits:FLT 2006-2013Additional Information UOM1 - KIT

Tour-pak latch kit. Fits:FLTRU 1987-2013FLT 1987-2013FLHT 1987-2013Additional Information UOM1 - KIT

V-Twin - 49-1283 - Tour-Pak Tether Cable KitDescriptionTour-Pak tether cable kit. Fits:FLT 1991-UPAdditional Information UOM

Saddlebag hardware kit includes small clips, hinges, face plates, and key-lock set for both bags.All saddlebags and lids are constructed of FRP, fiberglass reinforced plastic, readyy for primer and...

Saddlebag latch cover set features chrome face plates with black flame design inserts. Fits:FLT 1993-2013Additional Information OEM No.90690-04A

Saddlebag lock and key kit features a chrome finish. Fits:FLTR 1993-2013FLHR 1993-2013FLHTC 1993-2013FLHT 1993-2013FLHX 1993-2013Additional Information

Saddle bag lock and key kit includes 2 keys and 2 locks.All saddlebags and lids are constructed of FRP, reinforced plastic, readyy for primer and paint. FRP is made up of polyphenylene...

Saddlebag hardware kit includes all necessary tethers, hardware, seals, and hinges.*NOTE: Must order locks and face plates separately. Comprehensive saddlebag lid latch kits are great for aftermarket...

Tour-Pak black replacement latch kit includes front and rear latches and mounting hardware for installation. Comes with catch and spacer plate plus screws.These die-cast latches make access to the...

V-Twin - 49-0887 - Saddlebag Top StrapsDescriptionTop straps for saddlebag. Includes 8 screws.Includes qty 4 pieces 12-16x5/8" self tapping screws (OEM #3596) and 4 pieces 8-32x1/2" stainless truss...

V-Twin - 49-0886 - Saddlebag Lid Wear PlatesDescriptionStainless steel wear plates are for the saddlebag lid. Plates come in a set of four, and require installation with adhesive. Fits:FLT...

V-Twin - 49-0885 - Saddlebag Reinforcing Lid Back Plate SetDescriptionNew Old Stock" Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set.*NOTE: No...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent.Reflector set not included. Plate set is OE style die cast and chrome. They will accept reflector set or flame...

V-Twin - 49-0882 - Original Style Saddlebag Latch SetDescriptionSet includes four plastic rub bars installed and right and left side latches for saddlebag.Order screws and hardware separately...

Set includes four bail head studs, four washers, four grommets, four receptacles, and four mounts for the left and right side for mounting saddlebags.Does not include the lid hardware or latch plates...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set.. Fits:FLT 1993-2013Additional Information

Hardware kit is for the saddlebag lids.Hardware lid kit does not include locks or face plates. Fits:FLT 1993-2013Additional Information OEM No.9092

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Tour-Pak chrome replacement latch kit includes front and rear latches and mounting hardware for installation. Comes with catch and spacer plate, plus screws for easier mounting.These die-cast latches...

Front trim style speaker grill set features a chrome finish with a cross bar design.Sold as a set of 2. Fits:FLT 1996-2013Additional Information UOM

Saddle bag lock and key kit includes 2 key and 2 locks.Kit includes 2 x 90682-93 Cam Hooks and 2 x 7586 Jam Nuts 9/32-28 x 1/4. Fits:FLT 1993-2013FLHT 1993-2013Additional Information

Saddlebag Lock and key kit includes 2 locks and 2 keys, 2 cam hooks, 2 9/32 x 28 x 1/4 jam nuts, 2 8# x 32 x 3/8 screws, and right and left side plastic rub bars. Each lock is keyed different.All...

Saddlebag liner kit for stretched saddlebags features felt material.Customer may opt to use velcro strips to better secure liners inside of saddlebags. (Velcro not included.) Fits:FLT...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Saddlebag lid set includes right and left side lids with speaker cutout. Lids are plastic with a primed finish, ready for paint.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for...

Saddlebag filler strip set features a black finish.Right and left side set. Fits:FLT 2009-2013Additional Information OEM No.91614-10