Bagger Clutch, Driveline & Trans

Thrashin Supply Co. Dished Derby Cover for Harley Twin Cam Models  The Thrashin Supply Co. Dished Derby Cover is constructed from tough billet aluminum. Not only does this look super clean and sleek but it's durable so it'll last. Available in your...

Drag Specialties Kevlar, Organic, or Steel Clutch Plates for '99-'17 Harley Twin Cam The Drag Specialties Clutch plates are designed to allow precise shifting. These are made super tough, which means they'll last. To top it all off, Drag has made sure...

Drag Specialties Inner Clutch Hubs for Harley Softail, Dyna, and Touring Models Drag Specialties is known for providing quality products at reasonable prices and this Inner Clutch Hub is just that. It accepts all OEM components which means this is not...

Eastern Motorcycle Parts Clutch Hub Bearings Features: High-quality replacement component Sold each Fitment: '11-'17 Twin Cam; repl OEM #37906-11 '99-'10 Twin Cam; repl OEM #37906-90 '91-'18 XL; repl OEM #36799-91 '86-'90 XL; repl OEM...

Drag Specialties Transmission Side Covers Fits '99-'06 FLT, '00-'06 FXST, '99-'05 FXD/FXDWG Models These Transmission Side Covers for 5 speed Harley transmissions by Drag are made from die-cast zinc and will mount with your existing hardware...

Drag Specialties - Solid Primary Sprocket Kit fits '07-'16 Touring, '07-'17 Softail and '06-'17 Dyna Models With Drag's Solid Primary Sprocket Kit, you will no longer need a complete compensator assembly! Compared to the stock or diaphragm spring-style...

Darkhorse Motor Company - 34-Tooth Man-O-War Motorsprocket fits '07-'17 Twin Cam Models Darkhorse Motor Companys' 34-Tooth Man-O-War Motorsprocket is the first performance-engineered primary motor sprocket that acts as a replacement for the OEM...

Drag Specialties Primary Chain This primary chain by Drag was designed to last made using high quality raw materials.  Features: Improved fatigue resistance Pre-loaded to reduce initial elongation Endless construction using...

Baker High Torque Bearing/Seal Kit for '99-'06 Harley Twin Cam If your Harley has got some serious horsepower then this is just what you need. The Baker High Torque Bearing/Seal Kit is made to replace the two-piece bearing and seal in the inner primary...

Baker High Torque Bearing/Seal Kit for '99-'06 Harley Twin Cam If your Harley has got some serious horsepower then this is just what you need. The Baker High Torque Replacement Seal is made to replace the seal in Baker High Torque Bearing/Seal Kit...

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48, 49 and 51-tooth. Features: Convert rear drive belt to 530 chain Steel with a gloss black...

Drag Specialties Chrome Rear Sprocket For 530 Chain - Early (locating ring 1.980) Timken Bearing High-grade carbon steel replacement rear wheel sprockets 1.9" center hole

Baker - Armored Attitude Chain Adjuster fits '06-'17 Dyna, '07-'17 Softail and '07-'23 Touring Models Features 28% finer teeth spacing (compared to '01-'06 chain adjuster) for more accurate adjustments Active Plate and Back Support Plate investment...

Pro-One - 5-Speed Hydraulic Clutch Actuator Cover fits '87-'06 Big Twin Models (Exc. '06 Dyna Glide) The easiest way to add a hydraulic clutch to your 5-Speed Big Twin! Available in your choice of black or chrome. Features CNC machined from solid...

Trask - High Pressure Power Plate Spring Kit fits '09-'23 Big Twin & M8 Models Trask's High Pressure Power Plate Spring Kit features a precision machined billet aluminum power plate with high performance springs and chrome 12-point hardware. You'll...

Drag Specialties Clutch Shells  The Drag Specialties Clutch Shells include center bearing and snap rings making the mounting process a breeze. It also has a starter ring gear. Ride your Harley Davidson Motorcycle with ease knowing you're using high...

Rekluse RadiusX Auto Clutches This high performance clutch combines Rekluse's Torq-Drive and EXP technologies giving riders more power and control. Features: Dead-on clutch engagement everytime Take-off and stop in gear without using clutch lever -...

Drag Specialties Transmission Top Cover for Harley Big Twin '87-99 Chrome top transmission cover compliments other chrome engine and transmission pieces. Please make sure you check the fitment table below to ensure it will fit your...

Trask Assault Series Derby Cover - fits '16-'21 Harley Touring Models Upgrade the look of your Harley Davidson's primary with this see-through derby cover from Trask performance. Available in Chrome, Gloss Black, and Raw Machined. Features: Billet...

Barnett - Scorpion Series Clear Derby Cover fits '99-'06 Twin Cam Models Barnett's Scorpion Series Clear Derby Covers feature a scratch- and discoloration-resistant window which is tightly secured and sealed with an O-ring gasket. There's also an outer...

Drag Specialties - Chrome Rear Sprocket fits 530 Chain '00-'21 Big Twin Models (Exc. Models W/ Cush Drive); 2.22" Center Diameter Choose from four different sprocket sizes: 46-tooth, 48-tooth, 49-tooth, 51-tooth...

Drag Specialties - Complete Three- and Five- Stud Clutch Hubs fits '36-'E84 Big Twin Models These Stud Clutch Hubs are available with three or five studs; both options come complete with all of the necessary hardware for a quick, hassle-free...

Drag Specialties Primary Drive Kit fits '99-'06 Harley Big Twin Drag Specialties is known for having quality products at reasonable prices. This primary drive kit is just that. This kit has got just about everything covered, it comes with the...

Drag Specialties Transmission Side Covers Fits '06-'17 FXD, FXDWG; '07-'17 FXST; '07-'13 FLHT Models These transmission side cover by Drag Specialties are made from die-cast zinc and will mount with your existing hardware. Features: Made from...

Drag Specialties - Wet or Dry Friction Plate Set fits '68-'E84 Shovelhead Models Replaces OEM#37930-68 Features Runs wet or dry; meets or exceeds all OEM specs Contains (5) friction plates and (1) hub liner with...

Barnett - Scorpion Series Clear Derby Cover fits '07-'18 Big Twin Models (Exc. '18 Softail Sport Guide, '16-'18 Baggers & '15 Electra Glide Ultra Models) Barnett's Scorpion Series Clear Derby Covers feature a scratch- and discoloration-resistant...

Drag Specialties - Clutch Shell fits '90-'93 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-90. Features Replacement clutch shell with...

Drag Specialties - Clutch Shell fits '94-'97 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-94. Features Replacement clutch shell with...

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48 and 49-tooth. Features: Convert rear drive belt to 530 chain Steel with a gloss black...

Torqdrive® Clutch Kit fits '90-'97 Big Twin Models Torqdrive delivers more discs in less space so this kit includes six friction disks that offer up to 50% stronger clutch engagement with no increase in lever effort. They provide more friction and...

DP - High-Performance Steel Clutch Plates fits '90-'17 Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) (Repl. OEM #s 37913-98 & 37913-90) The DP High-Performance Steel Clutch Plates will neither expand nor fade or promote clutch swell. Qty...

Arlen Ness - 10-Gauge Hydraulic Clutch Actuators fits '14-'16 Touring and '16-'17 Softail Models These 10-Gauge Hydraulic Clutch Actuators are made with 6061-T6 billet aluminum and come in your choice of a black anodized or titanium anodized finish...

DP - High-Performance Friction Clutch Plates fits '98-'17 Evo Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) (Repl. OEM #37932-98) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free...

DP - High-Performance Steel Clutch Plates fits L'84-'97 Big Twin & '91-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S, '22 Nightster/RH975 Models) (Repl. OEM #s 37975-90, 379795-84A & 37913-90) The DP High-Performance Steel Clutch Kit...

Drag Specialties - Clutch Shell fits '70-'E84 Big Twin Chain-Drive Models  Sold each. Replaces OEM#37702-70A. Features Replacement clutch shell with starter ring gear Fitment 1984 Harley-Davidson Electra Glide Special...

Drag Specialties - Gloss Black Rear Sprocket fits 530 Chain '00-'21 Big Twin Models (Exc. Models W/ Cush Drive); 2.22" Center Diameter Choose from four different sprocket sizes: 46-tooth, 48-tooth, 49-tooth, 51-tooth...

Drag Specialties - Inner Primary Mainshaft Bearing/Seal Kit fits '89-'99 Evolution Big Twin & '99-'06 Big Twin Models (Exc. Dyna Glide Models) This kit comes with a pinion seal, a main shaft seal, bearing snap rings, an inner bearing race and a...

Joker Machine - Billet Derby Cover fits '70-'98 Big Twin Models - Chrome  This Derby Cover is available in your choice of a finned or smooth design. Features Include mounting hardware Made in the U.S.A...

Joker Machine - Smooth Billet Derby Cover fits '99-'19 Big Twin Models (Exc. '18 FLSB, '16-'18 Baggers & '15 FLHTCUL/FLHTKL Models) - Chrome NOTE: '06 Dyna Glide applications and all '07-'18 Big Twin applications (except '16-'18 Baggers, '15...

LA Choppers - County Line Derby Cover fits '16-'20 Touring, '15 FLHTCUL/​FLHTKL Models Features: Machined from billet 6061 aluminum Derby Covers are a sleek replacement for the stock covers Looks right at home with the rest of the County Line...