Gerbing - Panel Mounted Port - 12VFeatures:Receiving port for Gerbing's 12 V coax power plug6" connection cord that runs from the battery harness to create a permanent power source for your heated gear

Gerbing - 7V Rechargeable Battery - 3400 mAhFeatures:Rechargeable 7 V lithium battery pack with keeps you warm for up to 8 hoursCompatible with all 7 V vests, jackets, gloves and accessoriesIntegrated microprocessor and LED switchBattery status...

Gerbing - 7V Thermite Fleece Heated Vest 2.0Features:Thermite 2.0 vest provides up to 8 hours of heat and is perfect for staying warm during any cold-weather activityTwo-sided pile fleece provides insulating properties without weight; and its hydrophobic...

Gerbing - 7V Wool Heated SocksFeatures:Heats the entire bottom of your footMicrowire heating elements deliver evenly distributed heatMoisture-wicking Wool Blend FabricSpecial long cut pulls over your calf to fit any boot or shoeTouch-Button Temperature...

Gerbing - Women's Heated 5V Rain CoatFeatures:A one-touch LED button with 3 different heat settings, low, medium, and high, provides easy heat controls on the jacketUses FAR infrared heating and reflective technology to deliver hours of heat and...

Gerbing - Battery Pack with Remote - 12V - 9000 mAhFeatures:Allows use of heated clothing while not hard-wired into your motorcycleRemote control with 3 heat settingsOver 1 hour of heatWall charger includedUsed only for Gerbing GT5 gloves.

Gerbing - Extension Cord for Heated Clothing - 2'Features:Provides 2 extra feet of length for those hard to reach areas

Gerbing - 12V G4 Heated Gloves - BlackFeatures:100% leather construction provides a great fit, and the basic protection for all types of ridingMicrowire™ heating throughout, including the top and bottom of each fingerAquatex™ breathable water resistant...

TC Bros Pro Series Rear Radial Caliper Conversion — M8 Softail Fits: 2018-2026 Harley-Davidson M8 Softail, for converting to a Brembo M4 radial rear caliper (caliper sold separately). Swapping an M8 Softail to a radial rear caliper usually means...

TC Bros Profile Rear Rotor — 2021-Up Pan America Fits: 2021-2026 Harley-Davidson Pan America, mag or spoke wheels. A floating Profile rear rotor for the Pan America — same diameter as stock, lighter, cooler, and it matches the TC Bros Pan Am front rotors...

TC Bros Profile 12.6" Front Rotor — 2024-Up Touring & Pan America Mag Wheels Fits: 2024-up non-CVO Harley-Davidson Touring and 2021-up Pan America with mag wheels (one-piece 12.6" rotor, hub integrated into the wheel). For the late Baggers...

TC Bros 12.6" Oversized Front Floating Rotor — 2014-2023 Touring Fits: 2014-2023 Harley-Davidson Touring. Requires the TC Bros oversized caliper adapter kit (sold separately). The full-floating version of the TC Bros oversized Bagger rotor. Steps a...

TC Bros Profile 12.6" Oversized Front Rotor — 2014-2023 Touring Fits: 2014-2023 Harley-Davidson Touring with OEM wheels. Requires the TC Bros oversized caliper adapter kit (sold separately). Bump a 2014-2023 Bagger from the stock 11.8" rotor up...

TC Bros Profile 11.8" Front Rotor — 2014-Up Touring Mag Wheels Fits: Most 2014-2023 non-CVO Touring models with mag wheels (one-piece 5-bolt rotor), plus 2024-up FLHRXS Road King Special, FLHP, FLHTP and Tri Glide Ultra. A bolt-on 11.8" (300mm)...

TC Bros Profile 12.6" Front Floating Rotor — Touring & Pan America Spoke Wheels Fits: 2023-up Harley-Davidson Touring/CVO and 2021-up Pan America with wire spoke wheels using the 12.6" (320mm) floating rotor, 5 x 3.25" bolt pattern...

TC Bros Extra-Narrow Triple Trees — 2008-2022 Sportster Fits: 2008-2022 Harley-Davidson Sportster with factory 39mm forks. TC Bros extra-narrow trees turn a set of factory 39mm Harley forks into a skinny chopper front end. The legs end up over...

TC Bros Extra-Narrow Triple Trees — 2004-2007 Sportster Fits: 2004-2007 Harley-Davidson Sportster with factory 39mm forks. TC Bros extra-narrow trees turn a set of factory 39mm Harley forks into a skinny chopper front end. The legs end up over...

TC Bros Extra-Narrow Triple Trees — 1988-2003 39mm Narrowglide Fits: 1988-2003 Harley-Davidson 39mm narrowglide forks with 3/4" axle (Sportster, Dyna and custom builds). TC Bros extra-narrow trees turn a set of factory 39mm Harley forks into a...

TC Bros Belt-to-Chain Conversion Kit — M8 Street Bob Fits: 2018-2026 Harley-Davidson Softail Street Bob. Harley belts are quiet and low-maintenance, but they hate shock loads, lock you into stock wheelbase and ride height, and are a pain to replace. A...

TC Bros Belt-to-Chain Conversion Kit — M8 Fat Bob Fits: 2018-2026 Harley-Davidson Softail Fat Bob. Harley belts are quiet and low-maintenance, but they hate shock loads, lock you into stock wheelbase and ride height, and are a pain to replace. A 530...

TC Bros Belt-to-Chain Conversion Kit — 2000-2005 Dyna Fits: 2000-2005 Harley-Davidson Dyna with stock wheels, swingarm and frame. Harley belts are quiet and low-maintenance, but they hate shock loads, lock you into stock wheelbase and ride height, and...

TC Bros License Plate Relocation Bracket — M8 Fat Bob Fits: 2018-2026 Harley-Davidson Softail Fat Bob FXFB and FXFBS. Replaces the Fat Bob's factory side-mount plastic plate holder with a center-mounted laydown plate. Keeps the stock plate light and...

TC Bros License Plate Relocation Bracket — M8 Street Bob & Slim Fits: 2018-2026 Harley-Davidson Softail Street Bob and Slim. Gets rid of the side-hung plastic plate holder you bump into every time you walk past the bike, and puts the plate...

TC Bros Rear Crash Bar — M8 Softail Fits: 2018-2026 Harley-Davidson M8 (monoshock) Softail. The rear half of the TC Bros M8 Softail crash protection — same heavy laser-cut brackets, 3/16" wall DOM tube and replaceable Delrin sliders as the front bar...

TC Bros Front Crash Bar — M8 Softail with Mid Controls Fits: 2018-2026 Harley-Davidson M8 Softail models with mid controls. A sacrificial front engine guard built from the thickest material on the market, meant to take the hit so your cases, primary and...

TC Bros Pro Series Truss Brake Pedal Arm — 2014-Up Touring Fits: 2014-2026 Harley-Davidson Touring. Compatible with TC Bros floorboard lift kits (fewer usable positions). The factory Bagger brake pedal sits where it sits — your ankle doesn't adjust, so...

TC Bros Pro Series Mid Controls — 2006-2017 Dyna Fits: 2006-2017 Harley-Davidson Dyna (forward-control or converted bikes). Works with any OEM exhaust; see notes for aftermarket. Swapping a forward-control Dyna to factory mids is a nightmare — clutch,...

TC Bros Pro Series Truss Brake Pedal — 1991-2017 Dyna Fits: 1991-2017 Harley-Davidson Dyna (OEM mid controls, or TC Bros mid controls with conversion kit 102-0205). A skeletonized billet brake arm designed with FEA so it stays stiff while shedding every...

TC Bros Pro Series Adjustable Shift Linkage — Dyna, FXR & M8 Softail Mids Fits: 1991-up Harley-Davidson Dyna, FXR and Softail models with OEM mid controls; also 1991-1998 forward-control Dynas converted to TC Bros mid controls. Left- and right-hand...

TC Bros Pro Series Adjustable Shift Linkage — 1999-2017 Dyna Fits: 1999-2017 Harley-Davidson Dyna with mid controls, including 2009-2017 forward-control Dynas converted to TC Bros mid controls. Does not fit 1991-1998. Converting a Dyna from forwards to...

TC Bros Pro Series Adjustable Brake Linkage — M8 Softail Fits: 2018-2026 Harley-Davidson Softail models with factory mid controls. Replaces the factory brake linkage on mid-control M8 Softails. Adjustable 4-1/2" to 5-1/2" on center to dial in...

TC Bros Pro Series Adjustable Shift Linkage — Touring & Evo/Twin Cam Softail Fits: 1984-up Harley-Davidson Touring and 1986-2017 Softail with factory forward controls. Replaces the factory shift linkage on forward-control Baggers and Evo/Twin Cam...

TC Bros Sportster Mid Controls Kit with Pegs — 2014-2022 Fits: 2014-2022 Harley-Davidson Sportster XL models. The complete TC Bros mid control kit for 2014-2022 Sportsters — bolt-on, USA-made, better feel than the factory mids, and it comes...

TC Bros Sportster Mid Controls Kit (No Pegs) — 2014-2022 Fits: 2014-2022 Harley-Davidson Sportster XL models. A bolt-on, USA-made mid control kit for late Sportsters that works and feels better than the factory mids, with a foot position slightly tucked...

TC Bros Top Clamp for Pro Series Modular Risers Fits: TC Bros Pro Series Modular Risers. Choose 1" (standard Harley-Davidson bar) or 1-1/8" (tapered MX-style bar). Dress up a set of TC Bros Pro Series Modular Risers with a contrasting top...

TC Bros Top Clamp for Pro Series Truss Risers Fits: TC Bros Pro Series Truss Risers. Choose 1" (standard Harley-Davidson bar) or 1-1/8" (tapered MX-style bar). A swap-in top clamp for TC Bros Pro Series Truss Risers. Use it to change finishes,...

TC Bros License Plate Relocation Bracket — Nightster RH975 Fits: 2022-2026 Harley-Davidson Nightster RH975 and RH975S. Ditch the factory side-hung plate on the Nightster for a center-mounted laydown plate. It keeps the stock plate light, wiring and...

TC Bros Brake Line Extension — Nightster RH975 Fits: 2022-2026 Harley-Davidson Nightster RH975 and RH975S with TC Bros Modular Risers for Nightster (6" or 8"). The stock Nightster front brake line has basically zero slack — raise the bar at all...

TC Bros Gauge Relocation Bracket — Nightster RH975 Fits: 2022-2026 Harley-Davidson Nightster RH975 and RH975S fitted with TC Bros Pro Series Modular Risers for Nightster (101-0704 series). Put TC Bros modular risers on a Nightster and the factory gauge...

TC Bros Pro Series Modular Risers — Nightster RH975 Fits: 2022-2026 Harley-Davidson Nightster RH975 and Nightster Special RH975S. Uses the factory Nightster handlebar. The RH Nightster bar has its own size and drill pattern, so off-the-shelf risers don't...