V-Twin - 35-1680 - CV XL Carburetor Manifold NaturalDescriptionCV XL carburetor manifold, for converting EFI models to CV carburetor units, features a natural finish.Re-use manifold flanges. *NOTE: Module ignition recalibration necessary. ...

V-Twin - 35-1679 - Linkert M5 Carburetor Rebuild KitDescriptionReplica Linkert M5 carburetor rebuild kit. Fits:EL 1936-1939Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

V-Twin - 35-1677 - Sifton Peak Seal Set for Linkert ManifoldsDescriptionSifton peak seal set for linkert manifolds, is the exact replacement for original brass seal rings. The ultimate seal for peak performance.Sold as a pair. Fits:EL 1936-1940U...

V-Twin - 35-1676 - 1/2 inch Breather Bolt SetDescriptionZinc 1/2" breather bolt set for breather brackets.Sold in a quantity of 2. Fits:XL 1991-UPAdditional Information UOM1 - SET ManufacturerV-Twin OriginImported Tech NoteSuggested to use with...

V-Twin - 35-1674 - Indian Linkert Choke Disc KitDescriptionIndian linkert choke disc kit includes disc, shaft and an angled lever as original, on 3-bolt linkert brass carburetors. Fits:Chief 1933-1952Additional Information UOM1 - KIT ManufacturerV-Twin...

V-Twin - 35-1673 - inchL inch Series Carburetor Choke Disc AssemblyDescriptionL" Series carburetor kit includes choke disc, screws and washers, shaft, external lever, and detent spring for 1-7/8" S&S "L" type carburetors.For S & S "L" Series carburetors...

V-Twin - 35-1669 - Sifton Manifold Nut and Seal SetDescriptionIncludes 2 parkerized manifold nuts and 2 peak seals. Fits:FL 1941-1954Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages712 Replacement Items35-1655 -...

V-Twin - 35-1668 - 40mm CV Carburetor KitDescription40mm CV carburetor kit includes a 40mm CV carburetor, manifold, manifold flange kit and support bracket with the integral breather.The manifold does not have provisions for map sensor or other pollution...

V-Twin - 35-1667 - Linkert Needle and Seat KitDescriptionLinkert needle and seat includes 90  fitting to accepts hose. Fits:UL 1941-1965FL 1941-1965EL 1941-1965W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement...

V-Twin - 35-1666 - CV Carburetor Mount Bracket Natural Stainless SteelDescriptionCv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin...

V-Twin - 35-1664 - Linkert Needle-Seat and Shut off AssemblyDescriptionLinker brass needle-seat combination with rotary shut off valve. Accepts 5/16" hose fuel line. For all brass linkert carburetors.Petcock accepts 1/4 or 5/16" fuel line. These fuel...

V-Twin - 35-1662 - 1-7/8 inch Intake ManifoldDescription2024 New Production natural alloy cast 1-7/8" intake manifol d is the flat seal type for use on OKO and S&S carburetors as a stock replacement.Machined for use with S&S and OKO carburetor...

V-Twin - 35-1661 - Linkert Needle And Seat AssemblyDescriptionLinkert needle and seat assembly features stainless steel needle machined brass seat with hose barbed end. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1660 - Keihin Carburetor Rebuild KitDescriptionKeihin carburetor rebuild kit contains all components for a professional accelerator pump rebuild.Includes 59.5mm Keihin accelerator pump rod for valve. Fits:XL 1976-1987FXD 1976-1992FLST...

V-Twin - 35-1659 - CV Carburetor Top BlackDescriptionBlack CV carburetor top with choke bracket built in. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages96

V-Twin - 35-1658 - Sifton Panhead Intake Manifold KitDescriptionSifton Panhead intake manifold kit is precision cast and machined with special seal design, using heavy duty clamps. Fits:FL 1955-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1657 - Linkert Carburetor Throttle KitDescriptionLinkert carburetor throttle shaft kit includes a throttle shaft, nylon bushings, spring and screws. Shaft is for 1-1/4" linkert brass carburetors. Fits:UL 1937-1948WL 1944-1951G 1936-1954GD...

V-Twin - 35-1656 - Linkert Carburetor Throttle Shaft KitDescriptionLinkert carburetor throttle shaft kit includes a throttle shaft, nylon bushings, spring and screws. Shaft is for 1" linkert brass carburetors. Fits:UL 1937-1948G 1936-1954WL...

V-Twin - 35-1655 - Sifton Peak Seal SetDescriptionSifton peak seal set for linkert carburetor intake manifolds, replaces the stock brass sealing rings, with an exact fit for peak performance.Sold as a pair. *NOTE: Clean the threads on the nuts and...

V-Twin - 35-1654 - Replica Intake Manifold KitDescriptionIntake manifold kit is constructed of cast iron and includes brass seals, nuts, screws, lock washers, and gasket to fit Knucklehead and Panhead models. Kit is shipped unassembled. Manifold is zinc...

V-Twin - 35-1653 - Standard Linkert Throttle DoorDescriptionStandard linkert carburetor throttle disc is for 1-1/4" bore carburetors. Stamped #13 with correct bevel standard size. Fits:UL 1937-1948WL 1929-1952G 1936-1954Additional Information OEM No...

V-Twin - 35-1652 - K Model Linkert Carburetor KitDescriptionK model linkert carburetor kit includes float, lever, pin, needle & seat, throttle door & gasket, and a screw set. Fits:K 1952-1956KH 1952-1956Additional Information UOM1 - KIT ...

V-Twin - 35-1650 - Bombsight Linkert M74 Carburetor AlloyDescriptionAlloy Bombsight M-74 Linkert carburetor. Includes 4 bolt Linkert carburetor body and hardware complete. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerMotorshop ...

V-Twin - 35-1546 - Mini Petcock Straight with ReserveDescriptionMini petcock is the straight type with a reserve. This petcock is for a 5/16" hose.The petcock is 1/4" National Pipe Thread. Includes a filter screen. Fits:Custom applicationAdditional...

V-Twin - 35-1545 - Mini Petcock 90  without ReserveDescriptionMini petcock is 90  type without a reserve. This petcock is for a 5/16" hose.The petcock is 1/4" National Pipe Thread. Barb is used for the outlet. Does not include a filter screen...

V-Twin - 35-1544 - Mini Petcock Straight without ReserveDescriptionMini petcock is the straight type without a reserve. This petcock is for a 5/16" hose.The petcock is 1/4" National Pipe Thread. Barb is used for the outlet. Includes the filter screen...

V-Twin - 35-1543 - Mini Petcock Inline without ReserveDescriptionMini petcock is the inline type without a reserve. This petcock is for a 5/16" hose.The petcock is 1/4" National Pipe Thread. Barb is used for both the inlet and outlet. Does not come with...

V-Twin - 35-1542 - OKO Keihin Carburetor KitDescriptionKit includes butterfly type Keihin carburetor assembly, stock intake manifold, spacer kit, clamp set and air cleaner mount kit. Fits:XL 1957-1977FL 1966-1977Additional Information UOM1 - KIT ...

V-Twin - 35-1492 - Fuel Line Hose Clamp Stainless SteelDescriptionStainless steel fuel line hose clamp is 1/4" and worm gear type.Features a phillips head screw. Fits:All modelsAdditional Information UOM25 - PK ManufacturerV-Twin OriginImported

V-Twin - 35-1465 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescriptionOKO performance 1-7/8" shorty carburetor kit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a 1-7/8" alloy...

V-Twin - 35-1460 - Complete OHV Linkert Carburetor Float Bowl AssemblyDescriptionComplete Linkert flat top float bowl assembly is for Overhead Valve models. Assembly includes a natural finish bowl, nitrophyl float, float arm, needle and seat, bowl nut,...

V-Twin - 35-1459 - Petcock Fuel ValveDescriptionVacuum operated fuel tank petcock valve is for use as fuel shut off to carburetors. The body features a black finish with a zinc plated lever and cover plate. Hex nut and screw not included.*NOTE: Nylon...

V-Twin - 35-1457 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescriptionKit includes a chrome billet air cleaner bracket kit, which features an intergral breather passage to air intake, and a 1-7/8" alloy finish OKO performance shorty carburetor...

V-Twin - 35-1455 - SV Linkert Carburetor Float Bowl AssemblyDescriptionComplete float bowl assembly is all set to just bolt on and go. Includes stock type bowl, stainless steel needle, and brass seat. One piece float lever, Nitryl float, float screw set,...

V-Twin - 35-1454 - Alloy Bombsight M74 Carburetor Hardware KitDescriptionAlloy bombsight M74 1-1/2" throat carburetor hardware kit includes a nitrophyl "unsinkable" float. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1453 - Complete OHV Linkert Carburetor Float Bowl AssemblyDescriptionComplete Linkert carburetor float boat assembly includes natural cast flat top bowl, float pivot arm with pin and caps, nitrofill foam "black swan" and bowl nut.Kit is...

V-Twin - 35-1452 - OHV Linkert Float Bowl KitDescriptionOverhead Valve linkert float bowl kit has a bowl with a milled flat top. Features the drain screw provision.Includes nitrophyl float and one piece float arm. Kit is unassembled and includes all...

V-Twin - 35-1450 - M51 Langhorne Linkert Parts KitDescriptionM51 Langhorne linkert parts kit only, without the body. Fits:W 1941-1952U 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

V-Twin - 35-1442 - Stainless Steel Worm Clamp with Phillips ScrewDescription7/32" - 5/8" worm clamp with phillips screw features a stainless steel finish.Sold as a pack of 25. Fits:All modelsAdditional Information UOM25 - PK ManufacturerV-Twin ...

V-Twin - 35-1438 - Sifton Fuel Pressure Regulator Housing BodyDescriptionSifton fuel pressure regulator housing body is constructed of billet material, serving as a replacement for the original plastic factory part. Fits:FXST 2001-2007FLST...