V-Twin - 35-1420 - Choke Enrichener KitDescriptionChoke enrichener kit includes springer, plunger, nut and cover for CV carburetor. Fits:Custom application for CV carburetorAdditional Information UOM1 - KIT ManufacturerV-Twin OriginImported

V-Twin - 35-1396 - Bombsight Linkert M51 Carburetor Hardware KitDescriptionBombsight linkert M51 1-1/4" throat carburetor hardware kit includes all parts except body and is for stock rebuilds with low speed fixed jets.WL and WLA must be fitted with...

V-Twin - 35-1395 - 1-1/8 inch Linkert Carburetor VenturiDescriptionThis aluminum 1-1/8" linkert carburetor venturi is precision machined to exact tolerences.Fits M-51L and M-41L carburetors. Fits:Replacement application for M41L and M51L carburetor.W...

V-Twin - 35-1393 - Shorty Carburetor Aduster Screw and Cable Stop BrassDescriptionShorty adjuster screw and cable stop feature a brass finish.For OKO single throttle disc to fit S&S and OKO carburetors. Fits:Custom applicationAdditional Information UOM1...

V-Twin - 35-1392 - Shut Off Rod SeatDescriptionShut off rod seat is zicad plated with a rotary shut off petcock design.Use with 5/16" fuel line on barbed end. Shut-off rod will not fit with this rod seat. Rod can be used for decoration only. ...

V-Twin - 35-1391 - 1-1/16 inch Linkert Carburetor VenturiDescriptionThis 1-1/16" linkert carburetor venturi is precision machined to exact tolerances, constructed of aluminum.This venturi is for M2, M5, M21, M41, M51, M52, M55, M58, M64, M65, M84, M88 &...

V-Twin - 35-1390 - OKO Single Throttle DiscDescriptionThrottle disc includes a single cable "pulley', mount stop and acorn nut is S&S and OKO type. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1389 - Linkert Throttle Lever Replacement Screw and Spring KitDescriptionLinkert throttle lever replacement screw and spring kit features a stainless steel finish. Fits:WL 1937-1952FL 1941-1965EL 1936-1952Additional Information UOM1 - KIT ...

V-Twin - 35-1388 - Linkert Throttle Lever Replacement Screw and Spring Kit ZincDescriptionLinkert throttle lever replacement screw and spring kit features a zinc finish. Fits:WL 1937-1952FL 1941-1965EL 1936-1952Additional Information UOM1 - KIT ...

V-Twin - 35-1385 - Keihin Carburetor KitDescriptionKeihin carburetor kit with butterfly type carburetor without air cleaner includes manifold and intake clamps. Fits:FL 1966-1977FX 1973-1977Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-1384 - Stainless Steel Intake Manifold Clamp KitDescriptionSolid stainless steel intake manifold clamp kit is flexible for a form fit around the seals. Includes Vtwin's original "Red" flat seals. Fits:XL 1978-1985FL 1978-1984Additional...

V-Twin - 35-1380 - CV Carburetor Mount with Choke Cable BracketDescriptionCV carburetor mount with choke cable bracket features a stainless steel finish.For Evolution and TC applications. Order breather bolts separately. Fits:FLST 1993-2007FXST...

V-Twin - 35-1378 - OKO Shorty Carburetor EnrichmentDescription2022 New Production OKO shorty carburetor enrichment assembly can be used on OKO shorty carburetors, when an aftermarket air cleaner or velocity stack is used. Features full on or full off...

V-Twin - 35-1377 - CV Carburetor Choke Cable kitDescriptionCV carburetor choke cable kit features cable with knob, mount bracket, screws and hardware. Fits:FX 1993-2006XL 1988-2006Additional Information UOM2 - KIT ManufacturerV-Twin OriginUSA

V-Twin - 35-1358 - Tourist Trophy 1-7/8 inch Shorty Carburetor KitDescriptionComplete 1-7/8" OKO shorty carburetor kit includes complete alloy finish carburetor assembly with flanges, alloy manifold, carburetor bracket with integral breather and open...

V-Twin - 35-1355 - 40mm XL CV Carburetor KitDescription40mm Sportster CV carburetor kit includes a 40mm CV carburetor with a natural finish, manifold and sealing flanges.. Fits:XL 1988-2003Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1350 - Replica Indian Chief Linkert Carburetor AssemblyDescriptionReplica 1-1/4" linkert carburetor assembly features 3 bolt mounting for Indian Chief models.Includes large capacity bean pot bowl, correct needle and seat fitting with NPT pipe...

V-Twin - 35-1340 - M-75 Linkert Carburetor Main NozzleDescriptionM-75 Linkert carburetor main nozzle. Fits:FL 1941-1950Additional Information OEM No.27331-41 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1339 - 3/8 inch Sifton PetcockDescriptionBrass Sifton petcock with 3/8" National Pipe Thread. Knurled knob turns fuel on and off.Petcock accepts 1/4 or 5/16" fuel line. These fuel lines do not rotate as gas is turned on or off. Our rotary...

V-Twin - 35-1328 - Black Dual Cable Throttle AssemblyDescriptionBlack dual cable assembly with nylon tube and adjuster installed. Fits:XL 1981-1996FXE 1981-1996Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1327 - Black Single Cable Throttle AssemblyDescriptionBlack single cable assembly with nylon tube and adjuster installed. Fits:FXE 1981-1996FX 1981-1996Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1326 - Idle Speed Adjustment ScrewDescriptionIdle speed adjustment screw for EFI models.Idle adjustment screw replaces the IAC activator and allows idle speed to be controlled by adjusting screw. Fits:FXD 2006-2018FXST 2006-2015FLST...

V-Twin - 35-1324 - Idle Control MinimizerDescriptionIdle control adjustment screw for EFI models.Idle adjustment screw replaces the IAC activator and allows idle speed to be controlled by adjusting screw. Fits:FXST 2000-2005FXD 2003-2005FLST 2000-2005FLT...

V-Twin - 35-1313 - OKO Keihin Carburetor KitDescriptionOKO Keihin carburetor kit with single throttle operation is for Ironhead models. Original butterfly type with choke and accelerator pump as original, with OEM type manifold and clamps. Flat seals...

V-Twin - 35-1296 - Linkert Side Valve Choke Disc KitDescriptionLinkert Side Valve choke disc kit includes a linkert choke shaft kit, carburetor choke lever and a carburetor choke lever screw. Fits:G 1936-1957U 1936-1948W 1936-1952Additional Information ...

V-Twin - 35-1293 - Overhead Valve Bean Pot Linkert Bowl AssemblyDescriptionOverhead Valve bean pot linkert bowl assembly includes a replica linkert carburetor float lever, nitrophyl linkert carburetor float, linkert carburetor float assembly and a...

V-Twin - 35-1292 - Schebler Small Round Nitrophyl Carburetor FloatDescriptionSchebler small round carburetor nitrophyl foam float.*NOTE: Mount screw not included. ...

V-Twin - 35-1291 - Schebler Offset Nitrophyl Carburetor FloatDescriptionSchebler offset carburetor nitrophyl foam float.*NOTE: Mount screw not included. ...

V-Twin - 35-1289 - XL Breather Spacer Set .5 inchDescriptionZinc plated EFI carburetor spacer set is .50" long and is for use with the integral breather/carburetor mount bracket.For S&S and OKO shorty carburetor installations. Spacers measure 3/4 x 1-1/2...

V-Twin - 35-1288 - G-WL 2 Bolt Manifold ZincDescriptionZinc finish 2 bolt manifold features 2 holes vertical for 2 bolt linkert or Mikuni-OKO with adapter.*NOTE: Will replace the early 3 bolt brass linkert carburetor manifold. Fits:G 1937-1973W...

V-Twin - 35-1287 - Linkert Side Valve Choke Disc KitDescriptionLinkert Side Valve choke disc kit includes extended lever for applications to clear a 7" round air cleaner, disc, shaft and screws.For use with 1-1/2" brass Linkert carburetors. ...

V-Twin - 35-1286 - OHV Linkert inchBean Pot inch Float Bowl KitDescriptionLinkert float bowl kit has a bowl with a milled flat top is for Overhead Valve models. The bean pot linkert bowl has extra capacity for long wide open throttle sessions. The bowl...

V-Twin - 35-1285 - Linkert Choke Shaft KitDescriptionLinkert choke shaft kit includes choke shaft, choke disc and detent plate and is for 1 1/2 inch linkert carburetors. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1282 - Linkert Choke Shaft KitDescriptionLinkert choke shaft 3 piece kit with carburetor mounted choke lever includes screws, disc, and lever. It is stock for M18, M51, civilian M88, civilian M58, civilian M64. Kit will work on any 1",...

V-Twin - 35-1281 - Linkert Choke Shaft KitDescriptionLinkert choke shaft 3 piece kit includes choke shaft, disc, and detent plate for 1-1/2" carburetors. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-1280 - inchL inch Series Replica Carburetor AssemblyDescriptionReplica carburetor assembly features original design of the 1960's features a natural bright finish aluminum, as pictured.*NOTE: Accepts S&S 3 bolt pattern air cleaners, air...

V-Twin - 35-1279 - OKO Panhead Shorty 1-7/8 inch Carburetor KitDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle response...

V-Twin - 35-1278 - OKO Panhead Shorty 1-7/8 inch Carburetor Kit AlloyDescriptionAlloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle...

V-Twin - 35-1276 - M8 EFI Manifold Flange SetDescriptionM8 EFI manifold flange set is zinc plated. Fits:FLT 2017-UPFX 2018-UPAdditional Information UOM1 - SET ManufacturerWyatt Gatling OriginImported

V-Twin - 35-1275 - EFI To CV Carburetor AdapterDescriptionEFI to CV carburetor adapter features a natural finish with an alloy construction.Features a M-4 thread for the screw. Fits:XL 2007-UPAdditional Information UOM1 - EA ManufacturerV-Twin ...