V-Twin - 50-0457 - Rear Fender Bobbed SteelDescriptionBobbed rear fender is constructed of steel and has a primer finish.Fender does not have a cut out for the ignition module which may be required to accommodate the ignition module on 2007-up XL. When...

V-Twin - 50-0456 - Rear Fender Steel Primer FinishDescriptionRear fender is constructed of steel and has a primer finish. Fender has cutout for ECM and mounts to stock struts.Fender does not have a cut out for the ignition module and may require one to...

V-Twin - 50-0455 - Rigid Rear Fender TailDescriptionRigid rear fender tail features a raw steel construction with the hinge installed.Features a 1955-1972 type tail lamp cut out. ...

V-Twin - 50-0453 - Front Fender Trim Bumper ChromeDescriptionChrome front fender trim bumper without rubber insert. Fits:FLT 1983-2013Additional Information OEM No.91085-83D UOM1 - EA ManufacturerWyatt Gatling OriginImported 2025 Catalog Pages65

V-Twin - 50-0451 - Spring Fork Front Fender Brace AssemblyDescriptionRaw steel Spring Fork front fender brace assembly features 5/8" width material and "rolled edge" as original.Braces and rocker mounting straps are riveted together. Completed bracket is...

V-Twin - 50-0449 - Rear Fender Mount Brace Strap RawDescriptionRigid rear fender mount brace strap is 5/8" wide with a raw finish and slotted 90  ends.Must be riveted to the lower fender brace. Fits:FL 1946-1957EL 1936-1946Additional Information UOM1 -...

V-Twin - 50-0447 - Rigid Bob Rear Fender Body RawDescriptionRigid bob rear fender body features a raw finish. Body features spot welded side panels and ends that are trimmed. Fits:EL 1936-1946Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 50-0438 - Rigid Rear Fender Body RawDescriptionRigid rear fender body features a raw finish. The front half does not include the skirt, panels, brackets, tail and hinge. The side panels are riveted in place.This is part of the original fender...

V-Twin - 50-0431 - 7.25 inch VL Ribbed Fender Blank RawDescription7.25" VL ribbed fender blank is constructed of steel and features a raw finish and comes with a full skirt.Profile is 1930-1933. Fender can be cut to match 1930-1933 VL models. Fender...

V-Twin - 50-0429 - 1949-54 FL Rigid Rear FenderDescription2024 New Production rear rigid fender assembly includes a segmented wire loom conduit and features an updated hinge design for the rear tail. Chain panel is ribbed and part of the fender. Assembly...

V-Twin - 50-0411 - Rear Bob Rigid Fender BraceDescriptionRear bob rigid fender brace is constructed of a 5/8" wide steel strip. Includes lower tab set that is riveted in place. Fits:EL 1936-1946Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 50-0408 - Rigid Rear Bob Fender Brace RawDescriptionRigid rear bob fender brace features a raw finish and features a 3/4" wide steel strip with the original tabs riveted in place. Brace also has a left hand tap for chain guard. Fits:FL...

V-Twin - 50-0407 - Rigid Rear Fender PieceDescriptionRigid rear fender piece includes skirt panels that are welded in. Piece is without braces and features a raw finish. Side body panels are riveted in place and the chain deflector is removeable. Fits:FL...

V-Twin - 50-0401 - Rigid Rear Fender BodyDescriptionRigid rear fender body is a one piece design. Fits:FL 1949-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-0396 - FLT Rear Fender Carbon FiberDescriptionCarbon fiber stock width rear fender for FLT models.*NOTE: Fender is undrilled and can be installed on 16", 18", 19" wheels. ...

V-Twin - 50-0395 - FLT Front Fender Carbon Fiber 16 inchDescriptionFLT 16" front fender features a carbon fiber finish.*NOTE: Fender is undrilled. Fits:FLT 2009-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-0393 - 7.25 inch VL Ribbed Fender Blank RawDescription7.25" VL ribbed fender blank is constructed of steel and features a raw finish.Profile is 1930-1933. Fender blank measures 1.5mm thick without holes. Raw fender does not include mount...

V-Twin - 50-0392 - Replica Front Fender Raw SteelDescriptionReplica raw front fender is constructed of steel. Features chrome tubular type brackets riveted in place. Fender is assembled with left side cable bracket.We suggested pre fitting fender prior...

V-Twin - 50-0390 - Front Fender Gunfire Raw SteelDescriptionWyatt Gatling front fender is constructed from 1.5mm raw steel.Fender is designed for custom applications, no mounting holes are drilled. Fender has 180  coverage with built in 4-1/8" wide...

V-Twin - 50-0387 - 16 inch Round Sissy Bar Top BlackDescriptionBlack round sissy bar measures 16" high x 8" wide.Bar height is measured from the first bend to the top. For use with Rigid mount side plates only. Fits:XL 1979-1993FXE 1972-1985Additional...

V-Twin - 50-0386 - Rear Fender Tail Panel SetDescriptionRight and left rear fender tail panel set.*NOTE: Must be spot welded in place. Fits:EL 1936-1948FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

V-Twin - 50-0385 - Skull Front Fender Tip BlackDescriptionFront fender tip features a black finish with a black skull. Fits:FLST 1986-2006FLT 1990-2008Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages65

V-Twin - 50-0382 - Skull Front Fender Tip ChromeDescriptionFront fender tip features a chrome finish with a black skull. Fits:FLST 1986-2006FLT 1990-2008Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages65

V-Twin - 50-0381 - Replica Rear Fender SteelDescriptionExact replica quality steel rear fender, equipped with a tail lamp hole and mounts to the struts.Measures 6-3/8" wide with a length of 29". We suggest pre fitting fender prior to painting. ...

V-Twin - 50-0377 - 30 inch Rigid Sissy Bar BlackDescriptionRigid Sissy Bar is constructed of 9/16" solid square bar and features a black finish.Accepts 2 bolt medallion. ...

V-Twin - 50-0376 - 30 inch Rigid Sissy Bar ChromeDescriptionRigid Sissy Bar is constructed of 9/16" solid square bar and features a chrome finish with an overall length of 30" tall.Accepts 2 bolt medallion. The bottom mount point features a 9" inner...

V-Twin - 50-0372 - Rigid Rear Fender AssembledDescription2023 New Production rigid rear fender with 7/8" wide braces features a two piece spot welded skirt.Fender is fully assembled and riveted together with hinge. Fender may require a slight adjustment...

V-Twin - 50-0368 - Rigid Rear FenderDescription2021 New Production rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by clips.Fender comes with a 7/8" wide bracket and does not...

V-Twin - 50-0366 - 1955-57 FL Rigid Rear FenderDescription2024 New Production replica rigid rear fender has a 3 rib indent on the rear chain relief cut out. Fender is fully assembled and riveted together with hinge. Fender features a raw finish and 7/8"...

V-Twin - 50-0363 - Raw Rigid Rear Fender AssemblyDescription2022 New Production rigid rear fender with 5/8" wide braces includes tail section. The fender may require metal work for alignment and fit before primer and paint. Includes tube for wire tail...

V-Twin - 50-0359 - Front Spring Fork Fender Brace AssemblyDescriptionFront Spring Fork fender brace assembly features braces that are riveted to the rocker mount plates. The braces measure 3/4" wide. Fits:FL 1941-1946EL 1936-1946Additional Information ...

V-Twin - 50-0358 - Glide Style Steel Replica Front FenderDescriptionReplica glide style front fender is constructed of steel and has fender trim mount holes.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0357 - Smooth Tool Box ChromeDescriptionTool box features a smooth design with a chrome finish. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-0356 - Smooth Tool Box BlackDescriptionTool box features a smooth design with a black finish. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-0353 - FXD Rear Fender RawDescriptionStock style rear fender is constructed of steel with a raw oil finish. Fender will accept stock tail lamps. Fits:FXD 1991-2005Additional Information OEM No.59634-02 UOM1 - EA MeasurementsAdditional...

V-Twin - 50-0352 - FLT Rear Fender Extender BlackDescriptionTouring rear fender extender is molded from black ABS plastic, ready for primer and painting.*NOTE: Fits over exiting fender. May require some modification. We suggest pre-fitting the fender...

V-Twin - 50-0351 - Tourist Trophy Bobbed Rigid Rear FenderDescriptionRaw Tourist Trophy shortened rigid rear fender is constructed without side skirts. Fender is 7-1/4" wide and can be mounted to most custom rigid frames. Does not include 1/2 of the...

V-Twin - 50-0348 - Rear Fender Brace AssemblyDescriptionRear fender brace assembly features a raw steel finish and includes rear strap brace with lower mount tabs, right and left rear fender stays and rear end flap hoop. The brace measures 5/8" wide....

V-Twin - 50-0347 - Chrome Rear Fender Tip inch80 inch with InlayDescriptionDie cast chrome rear fender tip with the number 80 eteched in the tip features a painted inlay.Order side rails separately. Fits:FL 1980-1984Additional Information OEM No...

V-Twin - 50-0346 - Chrome Front Fender Tip inch80 inch with InlayDescriptionDie cast chrome front fender tip with the number 80 etched in the tip features a painted inlay. Fender is made from metal. Fits:FL 1980-1984Additional Information OEM No...