V-Twin - 50-0342 - Tool Box Lock AssemblyDescriptionTool box lock assembly includes two keys and features a raw finish. For kidney shaped tool boxes. Fits:FL 1941-1964EL 1940-1952Additional Information UOM1 - EA ManufacturerWyatt Gatling ...

V-Twin - 50-0341 - Rectangular Tool Box KitDescriptionTool box kit includes a black tool box, parkerized mounting kit, mount pad and bracket and a True to Original V-Twin patch.Black mounts vertical threaded pads must be welded to bracket. Bracket is to...

V-Twin - 50-0339 - Rear Fender Wire TabDescriptionRaw steel 3 piece fender wire tab should be welded in the rear for an authentic restoration. Fits:VL 1930-1936Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages616

V-Twin - 50-0338 - Big Twin Spring Fork Front Fender RawDescriptionBig Twin Spring Fork front fender features a raw finish and is "skirtless" for fitting to offset rockers.The braces are the wide type 3/4". *NOTE: Front fender tip is for Spring Fork...

V-Twin - 50-0324 - Big Twin Rigid Rear Fender RawDescription2022 New Production Big Twin rigid rear fender features a raw finish and is the "skirtless" type. Fender does not include skirts.The braces are the wide type 3/4" and the rear hinge tail with...

V-Twin - 50-0322 - 10 inch Round Sissy Bar TopDescriptionChrome 10" x 8-3/4" sissy bar is constructed of 5/8" round solid stock featuring the original poor boy look!Bar height is measured from the first bend to top. For Rigid mount side plates only...

V-Twin - 50-0320 - 16 inch Round Sissy Bar Top ChromeDescriptionChrome round sissy bar measures 16" high x 8" wide.Bar height is measured from the first bend to the top. For use with Rigid mount side plates only. Fits:XL 1979-1993FXE 1972-1985Additional...

V-Twin - 50-0308 - Oval Ribbed Tool Box ChromeDescriptionOval ribbed tool box features a chrome finish. This later version uses a thumb screw instead of keys.Correct for 1955-1957 FL but fits 1941-1957 FL. ...

V-Twin - 50-0307 - Oval Ribbed Tool Box BlackDescriptionOval ribbed tool box features a black finish. This later version uses a thumb screw instead of keys.Correct for 1955-1957 FL but fits 1941-1957 FL. *NOTE: Use wing nut screw to open and close. This...

V-Twin - 50-0306 - 6 inch Rounded Rear Fender RawDescriptionRound profile chopper raw fender is 6" wide and ribbed type with center bead. For rigid frame and hardtail applications.*NOTE: All fenders are shipped raw. Fenders have tooling marks on the...

V-Twin - 50-0305 - Rear Fender Strut ChromeDescriptionRear fender strut features a chrome finish. Fits:FXR 1984-1986Additional Information OEM No.59500-84 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages231

V-Twin - 50-0304 - Mid Frame Cover Air Deflector Kit BlackDescriptionBlack mid frame cover air deflector kit fits below the driver's seating area to direct engine heat away. Kit includes mounting hardware.Kit is for use on 2009-later Touring and Trike...

V-Twin - 50-0288 - Rear Fender Strut Cover Gloss BlackDescriptionGloss black rear fender strut covers fit over existing stock struts.Round end to round end measures 16-1/4". Fits:XL 2004-UPAdditional Information UOM1 - SET ManufacturerV-Twin ...

V-Twin - 50-0284 - Rigid Rear Bob FenderDescriptionSteel bobber style rigid rear fender without tail end hinge on the front fender section. Doe not includes 1/2 of the hinge in place of the fender half. Half of the hinge has been removed to show hinge...

V-Twin - 50-0283 - Rigid Rear Bob FenderDescriptionSteel bobber style rigid rear fender without tail end hinge on the front fender section. Does not include 1/2 of the hinge in place of the fender half.Fender style has tail piece removed leaving half of...

V-Twin - 50-0281 - 4 inch Ribbed Front Fender RawDescription4" ribbed front fender can be used with 19" or 21" wheels. Features a steel construction with a raw finish.Order brackets separately. Position cut drill mount holes as required. ...

V-Twin - 50-0280 - Raw Rigid Bob Fender AssemblyDescriptionRaw finish steel bobber style rigid rear fender without tail end hinge on the front fender section.Fender style has tail piece removed leaving half of the hinge in place, as on original Wild Ones...

V-Twin - 50-0279 - Heavy Duty Outer Fairing Support Bracket Set BlackDescriptionHeavy duty outer fairing support bracket set for Batwing type fairings, features a black powder coated finish.This new replacement bracket set has been made with thicker...

V-Twin - 50-0278 - Heavy Duty Inner Fairing Support Bracket Set Zinc PlatedDescriptionHeavy duty inner fairing support bracket set for Batwing type fairing, features a zinc plated finish.This new replacement bracket set has been made with thicker gauge...

V-Twin - 50-0271 - Sissy Bar Detachable Side PlatesDescriptionDetachable side plates for easily adding or removing detachable accessories. Fits:FXD 1996-2001Additional Information OEM No.53543-95A UOM1 - KIT ManufacturerWyatt Gatling OriginImported ...

V-Twin - 50-0268 - Front Fender RawDescriptionRaw front fender features raw brackets, which are riveted on for Spring Fork models.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0267 - Front Fender Raw SteelDescriptionFender is constructed of steel with braces for a 19" wheel on 49mm forks.We suggest pre fitting the fender prior to painting. Fits:FXCWC 2008-UP with 49mm forkAdditional Information OEM No.60158-08 ...

V-Twin - 50-0266 - Front Fender Steel Raw FinishDescriptionFender is constructed of steel with attached braces for models with 49mm forks and 19" wheels, featuring a raw finish.For use on 19" and 21" wheels. We suggest pre fitting the fender prior to...

V-Twin - 50-0265 - Front Fender SteelDescriptionSteel front fender with braces for 21" wheel on 49mm forks.For use on 19" and 21" wheels. We suggest pre fitting the fender prior to painting. Fits:FXDWG 2006-2017 with 49mm forksAdditional Information OEM...

V-Twin - 50-0255 - Rear Fender RawDescriptionFender is constructed of steel with a raw finish.Equipped with a reinforced tail lamp support bracket. On 2007-up models cut out opening to accommodate the ignition module. We suggest pre fitting the fender...

V-Twin - 50-0246 - Luggage Rack ChromeDescriptionLuggage rack to be used with solo seat only on sportster models. Will not fit with two up type seats.Rack is designed for loads of 10 pounds or less. Fits:XL 2004-UPAdditional Information UOM1 - EA ...

V-Twin - 50-0244 - Rear Fender RawDescriptionFender is constructed of steel and is 13-1/2" wide x 38" long. It is smooth formed and not drilled for builders application.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0242 - Rear Fender Strutless RawDescriptionStrutless rear fender is 2mm thick and has a width of 12.75" and constructed of steel. Fender will cover 280-300 series tire.Let V-Twin help you with that wide tire conversion. These strutless rear...

V-Twin - 50-0239 - Chrome Luggage RackDescriptionChrome luggage rack has mounts which are 7" center to center.Use with stock solo seat. Rack is designed for loads of 10 pounds or less. Fits:XL 2004-UPAdditional Information UOM1 - EA ...

V-Twin - 50-0238 - Rear Fender Strut Cover ChromeDescriptionChrome rear fender strut cover fits over existing stock struts.Round end to round end measures 16-1/4". Fits:XL 2004-UPAdditional Information OEM No.59902-04 UOM1 - SET ManufacturerWyatt...

V-Twin - 50-0237 - Sissy Bar Detachable Side PlatesDescriptionSide plates are detachable and can mount sissy bars with a width of 8-3/4".*NOTE: Must order hardware separately. **NOTE: See Tech Notes for parts sold separately for specific fitments...

V-Twin - 50-0236 - Wyatt Gatling Chrome Luggage RackDescriptionChrome luggage rack is for Bobbed rear fenders.Rack is designed for loads of 10 pound or less. When installed rack measures 3-1/2" from bolt hole to front of rack and 8" from bolt hole to...

V-Twin - 50-0234 - Wyatt Gatling Chrome Contour Luggage RackDescriptionChrome luggage rack features steel construction for use with solo seats.Rack is designed for loads of 10 pound or less. Fits:FXDWG 1993-2005Additional Information UOM1 - EA ...

V-Twin - 50-0232 - Wyatt Gatling Chrome Luggage RackDescriptionChrome luggage rack is for Bobbed rear fenders.Rack is designed for loads of 10 pound or less. Fits:FXST 2000-2004Additional Information UOM1 - EA MeasurementsAdditional InformationLength:...

V-Twin - 50-0209 - Rear Fender Flat Bobbed RawDescriptionUnfinished 8-1/2" wide heavy duty rear flat fender is rolled of 16 gauge steel and is 1-7/8" deep.Fender may require trimming and finishing for chain relief. We suggest pre fitting the fender prior...

V-Twin - 50-0207 - FXDWG Rear Fender BobbedDescriptionBobbed rear fender is the stock replacement for FXDWG rear fenders with a raw finish.We suggest pre fitting the fender prior to painting. *NOTE: Have square cut out in front. ...

V-Twin - 50-0195 - 4 inch Front Fender Raw Universal Sport StyleDescription4" fender has a raw smooth finish with a rolled edge and front.Fender fits 21" tires. The brackets are not included. We suggest pre fitting the fender prior to painting. Before...

V-Twin - 50-0187 - Replica Rear Fender SteelDescriptionReplica fender is constructed of steel and has a cutout for the tail lamp. Fender mounts to stock struts.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0185 - Front Fender Fat Kid SteelDescriptionFender is constructed of steel and fits 16" wheels on glide forks.For use with 16" wheels. We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0184 - Replica Rear Fender SteelDescriptionReplica rear fender is constructed of steel and has tail lamp hole. Fender mounts to stock struts.We suggest pre fitting the fender prior to painting. ...