Harley Davidson

Arm chair sissy bar for Sportster models features a black finish.Original "arm chain" design from 1977, developed by Ron Thiese at SMC ACCU Weld in Palmer, MA. Fits:XLS 1979-1982Additional Information

Side plates are non-detachable and can mount sissy bars with a width of 8-3/4" in a black finish.Set of two. Fits:FLSTN 2000-2017FLSTC 2000-2017FLSTS 2000-2017Additional Information

V-Twin - 50-1258 - Black Fork Mount Wind Deflector SetDescriptionBlack fork mount wind deflectors extends the windshield's coverage for superior protection in any weather.Scooped deflectors are...

V-Twin - 50-1257 - Chrome Fork Mount Wind Deflector SetDescriptionChrome fork mount wind deflectors extends the windshield's coverage for superior protection in any weather.Scooped deflectors are...

V-Twin - 50-1254 - M8 One Piece Sissy Bar ChromeDescriptionChrome 20" sissy bar is constructed of 5/8" solid cold roll stock features the one piece welded design. This is the non-detachable type for...

V-Twin - 50-1253 - M8 One Piece Sissy Bar BlackDescriptionBlack 20" sissy bar is constructed of 5/8" solid cold roll stock features the one piece welded design. This is the non-detachable type for M8...

Raw steel wire loom fender strip for inside of the left FL rear hinged fender, radiused to fit the fender contour, and segmented to accept tail lamp wires.Must be spot welded to the left side or...

Wire loom spring clamp features a raw finish and is for use with the rear fender. To hold spring loom cover in place use #32-2036. Clamp is sold in a pack of 5.*NOTE: Must be spot welded on. Fits:FL...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

Fender tip set features a front and rear tip in a smooth style.Some drilling may be required for installation. Fits:FLSTF 1990-2006Additional Information OE

Fender tips constructed of die cast aluminum with a chrome finish. Features drilled holes for mounting, hardware included.One measure 7-1/4" x 3-1/2" x 2" and the other measures 7-1/4" x 2-3/4" x...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Wyatt Gatling - 16" Back Sissy Bar fits '06-'17 Softail Models (OEM #51477-06) 16" x 11-1/16" sissy bar top. Side strap sold separately. Sissy bar is metal. The width measures 11-1/16" across the...

Wyatt Gatling - 11" Back Sissy Bar fits '06-'17 Softail Models (OEM #51477-06) Mini lowboy, 11" sissy bar back Note: Made from square stock Measurements: Width: 11-1/16" Tech...

V-Twin - 50-1088 - Front Fender Mount Kit ChromeDescriptionChrome front fender mount kit includes acorn nuts. Kit attches fender to original style assembly. Fits:FXST 1994-UPAdditional Information

Chrome front fender mount kit attaches fender to original style assembly. Fits:FLST 1986-1999Additional Information UOM1 - KIT

Chrome front fender mount kit attaches fender to original style assembly. Fits:FXST 1984-1993Additional Information UOM1 - KIT

Rear fender bumper without grill. Fits:FLST 1986-1999Additional Information UOM1 - EA ManufacturerV-T

Rear fender trim bumper with original cabbage cutter design grill.Rear fender trim bumper measures 14-1/8" long, 10-3/4" tall and 8-1/2" deep. Fits:FLSTC 2005-2007FLSTS 1997-2003Additional Information

Front fender trim kit includes chrome front fender tip and front fender trim side rails for FL models. Fits:FL 1967-1972Additional Information UOM1 - SET

Front fender trim set includes front fender tip and front fender trim side rails. Fits:FL 1957-1966Additional Information OEM No.59204-57

Tool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL...

V-Twin - 50-0866 - Rear Fender Kit BobbedDescriptionBobbed rear fender kit includes steel fender and seat filler plate.We suggest pre fitting fender prior to painting. Order chrome struts, tail lamp...

Wyatt Gatling - Sissy Bar Side Plate Set fits '00-'17 Softail Models (OEM #53378-03A) 2022 New Production side plates with an updated hinge are non-detachable and can mount sissy bar with a width of...

Bobbed rear fender kit includes a steel fender, cateye tail lamp, chrome tail lamp bracket, and chrome struts.We suggest pre fitting fender prior to painting. Order sissy bar components separately. ...

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

V-Twin - 50-0684 - Chrome Front Fender TipDescriptionFront fender tip is construced of ABS plastic and features a chrome finish. Fits:FLT 2014-UPAdditional Information

2022 New Production Replica rear fender is flip style with updated hinged tail.Fender will accept 1955-1972 type tail light. We suggest pre fitting the fender prior to painting. Before priming or...

2022 New Production side plates with updated hinge are non- detachable and can mount sissy bars with a width of 11-1/16" or 8-3/4".Set of Two. Mounting holes measure 9-1/4" center to center. ...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Rear fender kit includes steel fender, Replica chrome struts , chrome license plate bracket, and tail lamp with hardware.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0536 - FLT Smooth Rear FenderDescriptionRear fender is the smooth type for custom tail lamp installation on FLT models.*NOTE: UPS may consider this part as packaged "oversize" for...

Chrome 8-3/4" sissy bar kit includes a 8-3/4" wide shorty sissy bar handrail and non-detachable side plates.*NOTE: Hardware not included. Fits:FXDX 2002-2005FXDX 1999-1999FXDL 1996-2005FXDXT...

Chrome 10" sissy bar kit includes a 10" round solid sissy bar and non-detachable side plates.Bar height is measured from the first bend to the top. *NOTE: Hardware not included. Fits:FXDX...

Rear shorty fender features a primer finish. For Softail models.Fender does not includes tail lamp mount. Fits:FLST 1986-1999FXST 1986-1999Additional Information

V-Twin - 50-0469 - 16 inch Sissy Bar Kit ChromeDescriptionChrome 16" sissy bar kit includes a 16" round bar, detachable side plates and a luggage rack mounting kit.Bar height is measured from the...

V-Twin - 50-0468 - 16 inch Sissy Bar Kit ChromeDescriptionChrome 16" sissy bar kit includes a 16" round bar and non-detachable side plates.Bar height is measured from the first bend to the top...

Magneto advance plate screw set includes four allen flathead screws and 2 hex screws with lock nuts.Kit includes 4 tapered screws for mounting base to magneto head. Fits 1965-70 XL with Magneto cable...