Harley Davidson

V-Twin - 6 Volt 22 AH Sealed Battery fits '36-'52 EL, '37-'52 W, '41-'65 FL Models 6 volt 22 AH sealed lithium-iron phosphate H-2 battery. Built-in BMS (Battery Management System) read out on top. Exact case, top and terminals size for replacement...

V-Twin - 12 Volt 12 AH Sealed Battery fits '30-'52 WR, '41-'64 FL, '36-'52 EL Models 12 volt 12 AH sealed lithium-iron phosphate H-2 battery. Built-in BMS (Battery Management System) read out on top. Exact case, top and terminals size for...

V-Twin - TC-88 Finned Rocker Box Set fits '99-'16 FLT/ FL, '99-'17 FLST/FXST Models TC-88 finned rocker box set features a chrome finish. Fitment: FLT 1999-2016 FL 1999-2016 FLST 1999-2017 FXST 1999-2017

V-Twin - Mid Control Shifter Shaft fits '89-Up FXST/FLST, '81-Up Sportster Models Softail mid control shifter shaft is the cross over type, used to route over inner primary to connect to shifter linkage. For mid shifter control. Shaft has splined...

V-Twin - Handlebar Top Clamp fits '15-Up FLTR Model (OEM #559000-71) Handlebar top clamp for 1-1/4" handlebars features machined aluminum with clear anodized finish. Includes three set screws to hold handlebars in place Fitment: FLTR 2015-UP

V-Twin - Seat Nose Hinge Set fits '41-'57 FL, '36-'54 EL Models Chrome seat nose hinge set includes two pivot tabs with stainless steel nose bracket. Mounts on 1936-47 Knucklehead frames and 1948-57 Panhead frames Fitment: FL 1941-1957 EL 1936-1954

V-Twin - Linkert Air Cleaner Adapter fits Custom Linkert Air cleaners, or Air Dams to Super B Carburetors Super B to Linkert air cleaner adapter will mount all Linkert air cleaners, or air dams to Super B carburetors. Fitment: Custom Linkert air...

V-Twin - 3/8" Stainless Steel 90° Rotary Petcock fits Custom Application 90° stainless steel petcock with rotary valve and 3/8" NPT. First offered by V-Twin in 2013. Fitment: Custom application

V-Twin - 6" Clutch Cable Extention fits '18-Up FLT Model Black 6" clutch cable extention for Touring models. Fitment: FLT 2018-UP

V-Twin - 3.6 Gallon Gas Tank Raw Steel fits '18-Up M8 Softail Model Gas tank is one piece and has a fuel capicity of 14 liters, featuring a raw finish for M8 models. Accepts bung type vented gas cap. Check the tank for flaws or fit before painting...

V-Twin - 52" Inline Spring Fork Assembly fits Custom Application Unit features chrome springs, and rockers, front and rear leg in black. This 52" assembly is 20" over stock length. Includes inner and outer springs, front and rear legs, 1" inline...

V-Twin - 16" x 3.00" Front Spoke Wheel fits '00-'04 FLT Model Replica front 16" x 3.00" wheel assembly with chrome rim, 40 spoke style chrome hub with internals, and chrome spokes. Wheel has 5/16" x 18 threads on both sides for a 1" axle and brake...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold cranking amps and amp hour capacity. AGM battery is...

V-Twin - H-2 6 Volt 22 Amp Battery fits '41-'64 FL, '37-'52 W, '36-'52 EL Models H-2 6 volt 22 amp battery is lead acid type, shipped dry. Conventional type battery without lead acid pack. Acid is available at Tractor Supply stores nationwide or...

V-Twin - Jockey Shifter Ratchet Top Lever fits '52-'78 FL, '73-'78 FX Models Polished ratchet top jockey shifter lever mounts with three screws. Investment cast one piece for unique shape and fitment. Note: Handlebar has knob built in. Fitment: ...

V-Twin - 22" Chrome Cigar Muffler fits '58-'60 FL Model Chrome 22" cigar muffler features a seamless body design with non-removable baffles. Cigar mufflers fit over 1-3/4" outside diameter inlet pipes. Muffler has a 3-1/4" diameter with a 1-3/4"...

V-Twin - 24" Chrome Cigar Muffler fits '50-'57 FL Model Chrome 24" cigar style muffler with internal baffle has a 3-1/4" outside body diameter. Cigar mufflers fit over 1-3/4" outside diameter inlet pipes. The outlet's outer diameter measures 1-7/8"...

V-Twin - Muffler Mount Kit fits '94-Up FLT Model Touring muffler mount kit includes brackets that allow adjustment to the center muffler on mount brackets .Includes rubber bumpers, chrome strips and hardware. Fitment: FLT 1994-UP

V-Twin - Black Oval Air Cleaner Insert fits '66-'75 XLH/XLCH, '67-'75 FLH/FL Models (OEM #29205-69) Oval air cleaner insert features alloy fins on a black background. Fitment: XLH 1966-1975 FX 1971-1975 XLCH 1966-1975 FLH 1967-1975 FL 1967-1975

V-Twin - 7/8" 1/4" Turn Handlebar Throttle Assembly Handlebar throttle assembly allows fast action on standard 7/8" handlebars with pull type throttle application using a cable. Features alloy finish with steel tube.Assembly uses a "pull type" cable...

V-Twin - 34" Black Upper Clutch Cable fits '20-Up FXLRS, '22-'23 FXLRST Models (OEM #372004-33A) Upper clutch cable is black vinyl type featuring an overall length of 34". Fitment: FXLRST 2022-2023 FXLRS 2020-UP Measurements: Travel: 2-5/16"

V-Twin - Black Die Cast Tank Trim Cover fits '84-'99 FXST Model Black die cast tank trim cover replaces existing rubber divider on models with die cast dash. Includes cushion tape for underside to protect gas tanks. Fitment: FXST 1984-1999 Tech...

V-Twin - Swingarm Rear Pivot Pin Nut fits '09-Up FLT Model NOTE: Features 1/2"-20 SAE threads Fitment: FLT 2009-UP Measurements: Thread: 1/2"-20

Raw weld-on rear rigid hardtail frame section is for Ironhead Sportsters. Upgrade your motorcycle's performance and aesthetics with the V-Twin 51-0007 XL Rear Rigid Frame Section. This robust rear section includes a hardtail design with a center post,...

V-Twin - Brake Pedal Shaft fits '86-'17 FXST/FLST Models Softail foot brake pedal shaft with splined end. For mid control brake and pedal kit. Pedal shaft is splined to accept footpeg mount. Drilled and tapped for 3/8" x 16 thread Fitment: FXST...

V-Twin - AEE Mid Footpeg Support Bar Set fits '41-'99 FLH/FLT Models Natural stainless steel mid footpeg support bar set is for frames with a Flatside motor. Footpeg arms fit male FX style passenger pegs, not included. Order welded on lower frame...

V-Twin - Passenger Footpeg Set fits '18-Up FLST/FXST Models Passenger footpeg set with a female clevis features an alloy finish. The length from the center of the clevis bolt to the end is 100mm. Sold asset of two. Fitment: FLST 2018-UP FXST...

V-Twin - Zinc Passenger Footpeg Set fits '73-'84 FX Model Passenger footpeg set with a male yoke features a zinc finish. The length from the center of the clevis bolt to the end is 100mm. Sold asset of two Fitment: FX 1973-1984

V-Twin - Chrome Heavy Breather Air Cleaner Mount Bracket for '08-Up FLT Model  Chrome mount bracket for type A heavy breather air cleaners Fitment: FLT 2008-UP Tech Note: Suggested to use with #34-0067 Heavy Breather Air Cleaner Kit Chrome.

V-Twin - Black Heavy Breather Air Cleaner Mount Bracket fits '08-Up FLT Model Black mount bracket for type A heavy breather air cleaners Fitment: FLT 2008-UP Tech Note: Suggested to use with #34-0068 Heavy Breather Air Cleaner Kit Black.

V-Twin - 19" x 1.85" Front Spool Wheel fits Custom Application 19" x 1.85" front spool wheel features a chrome finish and 3/4" inner diameter sealed bearing installed. Complete wheel features chrome spokes, rim and hub Fitment: Custom application ...

V-Twin - Front Engine Mount Frame Brace fits '48-'84 FL Model Front engine mount weld on frame brace fits rigid frames for replacement and repair. Features a raw steel finish. This is an update design, heavier than OEM# 47664-48 #9. For 1948-1957...

V-Twin - 18" x 2.15" Black WR Front Spool Wheel fits '41-'52 WR Model 18" x 2.15" WR spool wheel features a nickel plated hub, stainless steel spokes and nipples and an 18" black steel rim. Also includes retro ball bearings and uses 7/16" stock axle to...

V-Twin - 18" x 2.15" WR Front Spool Wheel Alloy fits '37-'52 WR Model 18" x 2.15" WR spool wheel features a nickel plated hub, stainless steel spokes and nipples and an 18" polished alloy H-C type rim. Also includes retro ball bearings and uses 7/16"...

V-Twin - UPDATE USE 7610-4 fits '46-'48 UL/FL Models Spring Fork rocker bushing set Fitment: UL 1946-1948 FL 1946-1948

V-Twin - 21" x 2.15" Front Spoke Wheel fits '84-'99 FLT Model Replica 21" X 2.15" front wheel features chrome drop center rim, 40 chrome spokes with 40 nipples, and a chrome hub. Note: All spokes on wheel need to be inspected and re-torqued after 500...

V-Twin - XR 750 18" x 2.15" Rear Wheel fits '70-'84 XR, '37-'52 W, '57-'78 Sportster Models 18" x 2.15" WR/KR/XR rear wheel includes alloy hub with 9/16" bearings and a lock nut for the sprocket, stainless steel spokes and nipples and an 18" alloy H-C...

V-Twin - XR 750 19" x 2.50" Rear Flat Track Wheel fits '70-'84 XR, '52-'56 K, '57-'78  Sportster Models 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel...

Colony - 7616-1 7/8" X 18 Thread Cadmium Transmission Fill Plug fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models Cadmium transmission fill plug, standard 7/8" X 18 thread Fitment: UL 1937-1948 FX 1971-1984 EL 1936-1940 FL 1941-1984

V-Twin - Chrome Heavy Breather Air Cleaner Mount Bracket fits '08-Up FLT Model Chrome mount bracket for type A heavy breather air cleaners Fitment: FLT 2008-UP Tech Note: Suggested to use with #34-0089 M8 Heavy Breather Air Cleaner Kit Chrome