Jims

Jims - 5512 Shifter Shaft Bushing Remover & Installer fits '17-23 FLHT/​FLTR/​FLHR Models Features: Designed to remove old bushing and install new shifter shaft bushing to proper...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in...

Jims - 1075 Cylinder Stud Installer fits all Evolution Big Twin & Sportster Models Features: Assembly tool features a captive hardened ball bearing dimensionally set 1" from top of...

Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing...

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve...

Jims - 959 Engine Case Bearing Tool fits '03-'10 Twin Cam Models Features: Kit Includes one new steel bearing insert sleeve (held to under .0002" total indicator reading), all necessary drill...

Jims - 960 Balancer Shaft Removal Tool fits '07-'17 Twin Cam “B” Motors Models Features: Removes both the front and rear counter-balancer shaft bearing assembly, from the left engine...

Jims - 963 Bearing Puller Tool fits '03-'17 Twin Cam Models Features: Can also be used to remove Timken® bearing pinion shaft inner bearing race on '57-'07 XL, including all Buells®, and...

Jims - 966 Starter Jackshaft Seal Installer Tool fits '94-'06 Big Twin Models (Except '06 Dyna (OEM #120-66)) Features: Easily aligns and installs starter jackshaft seal without distorting or...

Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/​FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing...

Jims - 969 Socket O² Sensor Tool fits '06 Dyna Glide & '07-'17 Twin Cam Models (Except 10-17 FLHT/​ FLHR/​FLHX/​FLTR, 11-17 FXST/​FLST/​FXS, 12-17 FXD/​FLD) Features: Remove and install...

Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models Features: Use to install main drive gear oil seal to the proper depth with transmission...

Jims - 973 Sprocket Bearing Installer Tool fits all '07-'17 Twin Cam & '06 Dyna Glide Models Features: Allows installation of shaft bearing on '06 Harley-Davidson® Dyna Glide and all...

Jims - 975 Engine Rotator Tool fits '07-'17 Twin Cam & '06 Dyna Glide Models Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when...

Jims - 1042-8 25 mm Wheel Bearing Puller Adapter fits '07-'19 Harley Davidson Models Features: Made in the USA For use with 25 mm wheel bearing found on '07-'19 Harley-Davidson® models.

Jims - 2049 49 mm Fork Seal Installation Tool fits '06-'17 Dyna, '02-'11 V-Rod Models (Except Inverted Fork Models) Features: Installs lower leg 49 mm fork seals squarely into the bore without...

Jims - 956 Replacement Sleeve Timken Case Bearing Tool Features: Sleeve is several times stronger than stock aluminum case material that standard bearings ride in Replacement sleeve kit for...

Jims - 951 Original Equipment Torque Plate fits '99-'17 Twin Cam 88”, 96” or 103”, 3.75”-3.875” Models Features: Torque plates must be used when boring or honing...

Jims - 937 7mm Valve Guide Remover fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125R) Features: Available from JIMS to allow the proper removal or installation of...

Jims - 938 7mm Valve Guide Installer fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125CR) Features: Available from JIMS to allow the proper removal or installation...

Jims - 933 Thread Chaser Tap Set Features: An inexpensive way to clean up threads on frames or other parts that have been powder-coated or painted Includes coarse sizes; 1/4"-20, 5/16"-18,...

Jims - 915 Installation Inner Ball Bearing Tool fits '00-'17 Twin Cam “B” Motors Models Features: Accurately and safely install the inner balancer bearing mounted in the left engine...

Jims - 916 Case Support Blocks fits '00-'17 Twin Cam Models “B” Motors Features: Aluminum blocks have inserted Delrin® pads that rest against case to prevent marring and to...

Jims - 1278-3 Camshaft Bearing Installation fits '99-'17 Twin Cam Models Features: Replacement drive for JIMS® Cam Bearing Installation Tool

Jims - 917 Pushrod Cover Clip Features: Will install and remove the clip professionally with just one hand in seconds This tool will NOT marr or slip Made in the U.S.A.

Jims - 910 Piston Ring Compressor Set for Sizes From 1 7/8” To 2 7/8” - Set Of 4 Features: Fine-tooth ratcheting motion will compress the bands in small increments for accurate...

Jims - 782 4-Stroke Dual Gauge Leakdown Tester Features: Tool troubleshoots cylinder leakdown issues such as valve seat issues, bad rings and bad head gasket Hose assembly has both 14 mm and 18...

Jims - 908 Feeler Gauge Set Features: Tool includes two gauge holders and the following size gauge inserts: .002", .003", .004", .005", .006", .008", .009", .010" and .011" New innovative feeler...

Jims - 786 6-Speed Seal Installation Tool fits all '06-'20 6-Speed H-D Model w/ Cruise Drive Features: Harley-Davidson’s® new 6-speed transmission is a very stout piece of engineering,...

Jims - 780 Seal Leak Tester Tool fits '00-'17 Twin Cam “B” Motors Model Features: Required to seal the oil passage way from right case to the balancer tensioner plate; leaking can...

Jims - 1090 Mini Valve Spring Tester Features: Tool fits any dual rate or conical valve spring with an O.D. no larger then 1.6” diameter Works with bench vise, arbor, screw hydraulic or...

Jims - 902 Blue Motor Stand fits '00-'17 Twin Cam “B” Motor Model Features: Makes working on motors easier with better access Made in the USA Note: For Twin Cam "B" motor.

Jims - 766 Adapter for '84-'99 Evo Hydraulic Tappets Features Adapter for Harley-Davidson® Evolution hydraulic tappets Must use in conjunction with JIMS® tappet pump and test stand part#...

Jims - 941 Slim Oil Filter Wrench Features: An exclusive design makes it much easier to navigate when working near both the oil cooler and the crankcase position sensor Allows you more room to...

Jims - 3200 Flange Piston Ring End Gap Tool for H-D 95”,103” & 110” Motors w/ Standard Size Pistons (3.875” or 4” Bore) Features: This tool makes measuring ring...

Jims - 746 Go-No-Go Hydraulic Tappet Tool Features: Only when the tip fits nicely with no endplay is the tappet properly adjusted, if the tip doesn’t fit, OR if there is up and down...

Jims - 1042-7 Expander Dowel Tool fits All '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-Rod Models Features: Removes and installs 3/4", 1", and 25 mm wheel bearings with or without...

Jims - 1236 Piston Ring Compressor Kit for Sizes From 2 7/8” to 4 3/ 8” - Set Of 6 Features: Fine-tooth ratcheting motion will compress the bands in small increments for accurate...

Jims - 5532 Vacuum Tappet fits '84-'20 Big Twin Models w/ Hydraulic Tappet Assemblies Features: Removes the risk of using the starting system to pump up the lifters or damage to the valve train...