Super Glide FXE Electric Start

Chrome die cast kit includes license plate bracket and chrome plated steel adapter. Fits:XL 1973-1998FXR 1982-1994FX 1973-1984FXD 1991-1998FL 1973-1984Additional Information

V-Twin - 33-0033 - Front Amber Reflector Set With Chrome FrameDescriptionReflector set amber with a chrome frame, adhesive back type. Reflectors measure 3" long x 1-3/8" wide.*D.O.T. Approved...

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter and includes rear cylinder timing adjustment for rate of advance. Kit includes coil, 8.5mm wires, sensor...

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter, and includes rear cylinder timing adjustment for rate of advance.Ignition kit fits all 1970-1998...

Tail lamp wiring features PVC covered wires. Fits:FXE 1973-1977FX 1973-1977FL 1973-1977Additional Information UOM1 - EA

Small starter wire kit is PVC type. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - KIT Ma

Wiring harness kit features plastic wires in original factory color codes in vinyl loom with terminals installed.Builders kit includes handlebar, tail lalmp, coil and regulator wires. Fits:FXE...

Starter pinion gear bushing for electric starter gear and shaft. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA

York starter gear and shaft for use with FX-FL electric starter kit.*NOTE: Starter kit is filled with an OEM type starter, available from different companies. Fits:FL 1965-1984FX 1973-1984Additional...

Starter pinion gear screw. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA Manufacturer

Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear...

Stainless steel base ignition advance unit without cam is heat treated weights for 1970-up mechanical advance ignitions.Ignition Circuit Breaker Cam OEM #32542-70A and bolt or washers are not...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

Magneto gear kit. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

Magneto rotor with shaft. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Kit includes an updated 1.4kW hitachi type black high torque starter and all related components as shown.*NOTE: When fitting to FLH models, a FXE battery will be required to fit FXE battery. Fits:FL...

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also...

Handlebar wiring harness kit is extended type and color coded. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM1 - E

Replica starter relay will reduce voltage drop in single fire ignition applications during cranking, and will allow full 12 volt battery voltage to the module and coil. Fits:XL 1973-1979FX...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Button style handlebar starter or horn switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.

Button style handlebar switch is for front brake and comes without wire. Thread is 1/4-32. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Plain Rocker style handlebar switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM10 - PK

Battery cable is 6 gauge with 17/16" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for switch to starter...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

V-Fire ignition advance unit features stainless steel base, heat treated weights, and cam center screw for 1970-up mechanical advance ignition. Fits:FX 1971-1978FL 1970-1978XL 1970-1978Additional...

Relay to ground wire. Fits:XL 1970-1980FXE 1971-1978Additional Information OEM No.70169-70 UOM

Zinc crash bar adapter bracket. Fits:FXST 1984-1999FX 1972-1984Additional Information UOM1 - EA Measu

Chrome saddlebag supports are designed to fit the contour of the fender struts and protect your bags from brake caliper and swingarm. Supports are 2 bolt type.Sold in a quantity of 2. Fits:FX...

Battery tray carrier bracket has a chrome finish. Fits:FX 1971-1978Additional Information OEM No.66214-71 UOM<

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information

Chrome top maxi engine mount has a two piece and two bolt construction for secure fastening. Fits:FX 1971-1984FL 1948-1984Additional Information UOM

Rear seat bracket for FXE models. Fits:FX 1972-1984FXE 1972-1984Additional Information OEM No.52538-72

Engine bar support with zinc finish allows installation of mounting bracket on FX models. Fits:FX 1973-1984Additional Information OEM No.49032-74

Solo seat hardware kit includes nose bracket, chrome springs and rear brackets to mount small type solos.Includes a bracket and 2 thick spacers for the use on 1982-1985 FX models.The thick spacers...

Zinc front solo seat mount bracket bolts to frame holes above seat post tube. The seat nose bracket will swivel on this mount.This bracket will also mount to frames with a flat triangular plate at...