Super Glide FXE Electric Start

Black clutch cable feature heavy duty construction designed for reliability and longer service. This 64.56" long cable is 12" over stock. Fits:FL 1970-1984FXEF 1984-1985FXS 1977-1982FXST...

Right side speedometer drive is for 2:1 ratio and the front wheel only. Speedometer drive has a .750 axle hole and a spacer. The spacer width is .268 and has an overall length of .789. Features a...

Stainless steel braided clutch cable has a casing length of 60.56". Cable is 8" over stock length.Features a heavy duty construction designed for reliability and longer service. Fits:FX 1971-1984FL...

Carburetor choke tube kit. Fits:FX 1973-1978FXS 1973-1978Additional Information UOM1 - KIT Measuremen

Carburetor choke wire. Fits:FXS 1973-1984XL 1979-1980 early 1980FX 1973-1984Additional Information OEM No.29216-73

Carburetor choke tube. Fits:FX 1973-1978FXS 1973-1978Additional Information OEM No.29221-73 UOM<

One piece billet twist grip tube is for single or dual cable applications. Machined from aluminum bar stock. Fits:FL 1975-1996FX 1973-1996Additional Information

Right side speedometer drive is for a speedometer with a 2:1 ratio and is for front wheel drive and works great when converting from an electronic speedometer.Speedometer drive unit has a .750 axle...

Black front wheel drive speedometer cable with 16mm top nut. This 49" long cable is 6" over stock. Fits:FXR 1987-1992FXRS 1984-1987FXSB 1984-1986FXE 1973-1982FX 1973-1982XLH 1984-1984FXB 1981-1982XLH...

Inner carburetor choke wire. Fits:FX 1973-1984FL 1979-1980 Early 1980Additional Information UOM1 - EA

Stainless steel clutch cable features heavy duty constructio n designed for reliability and longer service. This cable ha s a casing length of 52.56 Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FXWG...

Black clutch cable features a heavy duty construction, designed for reliability and longer service. The cables casing length is 48" with a stock outer diameter. Fits:FX 1971-1984FL...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 48" casing length and is 52.5625" in overall length. Fits:FLH 1970-1984FXEF...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 56" cas ing length and an overall length of 62.625". Cable is 4" ove r stock. Fits:FL...

Black clutch cable features heavy duty construction designed for reliability and longer service. The cables casing length is 48 Fits:FX 1971-1984FL 1968-1984Additional Information <

V-Twin black clutch cable is 6" over stock length. Casing is 57" with an overall length of 65".Features a heavy duty construction designed for reliability and longer service life. Fits:FL...

V-Twin black clutch cable has a casing length of 51.625" and a 58.50" overall length. Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FX 1980-1986Additional Information

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

Keihin carburetor kit with butterfly type carburetor without air cleaner includes manifold and intake clamps. Fits:FL 1966-1977FX 1973-1977Additional Information

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on...

Sifton chrome petcock rear facing with 3/8" National Pipe Thread. Features solid brass construction with on/off and reserve positions, screen, and a 3/8" fitting. Fits:FX 1971-1974XL 1955-1974FL...

Black petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Black Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information