Tools
738 parts
Harley specialty tools for engine, primary and chassis work: locking bars, cam and clutch tools, fork sockets, jacks and tool rolls from Jims, Motion Pro and Feuling. Pair them with engine parts, clutch parts, fork tubes and oil change kits. Free US shipping over $100.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
V-Twin - 16-3200 - Jims Piston Ring End Gap Tool
Jims
$111.01V-Twin - 16-3200 - Jims Piston Ring End Gap ToolDescriptionTool makes measuring ring end gap faster and more accurate.Jims pison ring end gap tool makes measuring ring end gap faster, more accurate...$111.01 -
V-Twin - 16-2760 - Jims Engine Dipstick Socket Adapter
Jims
$50.34V-Twin - 16-2760 - Jims Engine Dipstick Socket AdapterDescriptionThis tool allows drivers and mechanics alike to quickly, and safely remove the engine oil level dipstick that lies precariously close...$50.34 -
V-Twin - 16-2759 - Jims Engine Dipstick Socket
Jims
$52.29V-Twin - 16-2759 - Jims Engine Dipstick SocketDescriptionThis tool protects your hand from the heat of the exhaust while checking the oil.This dipstick socket also assists the drivers with limited...$52.29 -
V-Twin - 16-2756 - O2 Sensor Wrench Tool
Jims
$99.92V-Twin - 16-2756 - O2 Sensor Wrench ToolDescriptionJims O2 wrench allows removal and installation of O2 sensors without removal of exhaust pipes. Fits:FXST 2012-2017 rear onlyAdditional Information$99.92 -
V-Twin - 16-2755 - O2 Sensor Wrench Tool
Jims
$109.10V-Twin - 16-2755 - O2 Sensor Wrench ToolDescriptionJims O2 wrench allows removal and installation of O2 sensors without removal of exhaust pipes. Fits:FXST 2012-2017 front onlyFXD 2012-2017 front and...$109.10 -
V-Twin - 16-2753 - Jims Flywheel Locking Tool
Jims
$69.31V-Twin - 16-2753 - Jims Flywheel Locking ToolDescriptionJims Twin Cam flyhweel locking and decommissioned tool locks the flywheel in place making service procedures easier.This tool is very visable...$69.31 -
V-Twin - 16-2130 - Main Drive Gear Remover Tool
Jims
$293.44V-Twin - 16-2130 - Main Drive Gear Remover ToolDescriptionMain drive gear remover tool removes the main drive gear from the main bearing while in the transmission case.This eliminates the need of an...$293.44 -
V-Twin - 16-1941 - Oil Filter Wrench
Motorshop
$22.96V-Twin - 16-1941 - Oil Filter WrenchDescriptionOil filter wrench features a slim 14 flute design to fit most oil filters, and 3/8" ratchet drive hole.Oil filter wrench allows more clearance for oil...$22.96 -
V-Twin - 16-1940 - OE Shock Spanner Wrench Tool
OE
$40.88V-Twin - 16-1940 - OE Shock Spanner Wrench ToolDescriptionOE shock spanner wrench tool. Fits:FXBB 2018-UPFXLR 2018-UPFLSL 2018-UPAdditional Information$40.88 -
V-Twin - 16-1888 - Piston Pin Lock Tool
Motorshop
$54.47V-Twin - 16-1888 - Piston Pin Lock ToolDescriptionThis piston pin lock ring installer is spiral type for all models. Fits:FX 1971-1977XL 1957-1977FL 1952-1977Additional Information$54.47 -
V-Twin - 16-1887 - M8 Valve Guide Reamer
Kibblewhite
$124.92V-Twin - 16-1887 - M8 Valve Guide ReamerDescriptionValve guide reamer is for use with M8 models with a diameter that measures .2357". Fits:FLT 2017-UPAdditional Information$124.92 -
V-Twin - 16-1886 - Jims Tappet Adjuster Tool
Jims
$58.71V-Twin - 16-1886 - Jims Tappet Adjuster ToolDescriptionJims tappet adjuster hand tool verifies proper adjustment on most hydraulic tappets for Evolution and Twin Cam models.Tappet adjustment made...$58.71 -
V-Twin - 16-1885 - Rod Straightening Tool - Fits 1941-1985 Harley-Davidson FL, 1936-1952 EL
V-Twin Mfg
$97.53Rod straightening tool is for use after checking with the rod alignment plate, as shown. Bend rod as required. Fits:FL 1941-1985EL 1936-1952Additional Information$97.53 -
V-Twin - 16-1883 - Jims Transmission Countershaft Bearing Tool
Jims
$356.64V-Twin - 16-1883 - Jims Transmission Countershaft Bearing ToolDescriptionJims bearing tool will install and remove the closed end countershaft bearing on 5 and 6 speed Big Twin transmissions without...$356.64 -
V-Twin - 16-1863 - Jims Tappet Test Stand Tool Adapter
Jims
$98.88V-Twin - 16-1863 - Jims Tappet Test Stand Tool AdapterDescriptionThis adapter is for the Jims tappet pump and test tool for use on Evolution style tappets. Fits:FXST 1984-1998FLT 1984-1998Additional...$98.88 -
V-Twin - 16-1860 - 7mm Valve Guide Ream Tool
Jims
$251.78V-Twin - 16-1860 - 7mm Valve Guide Ream ToolDescription7mm valve guide ream tool. Fits:FLST 2005-2017XL 2004-UPFXD 2005-2017FLT 2005-2016FXST 2005-2017Additional Information$251.78 -
V-Twin - 16-1858 - Jims Balancer Retainer Tool
Jims
$63.61V-Twin - 16-1858 - Jims Balancer Retainer ToolDescriptionUsed to hold the hydraulic tensioners in place when repairing Beta engines.Hydraulic tensioners are used to keep constant chain tension on the...$63.61 -
V-Twin - 16-1852 - Shaft Turning Tool
Motorshop
MSRP: $19.86$19.66V-Twin - 16-1852 - Shaft Turning ToolDescriptionShaft turning tool allows engine to be turned over by 1/2" ratchet or impact driver. Spline type. Fits:XL 1957-UPAdditional InformationMSRP: $19.86$19.66 -
V-Twin - 16-1850 - Shaft Turning Tool
Motorshop
MSRP: $39.87$39.07V-Twin - 16-1850 - Shaft Turning ToolDescriptionShaft turning tool allows engine to be turned over by 1/2" ratchet or impact driver. Spline type for TC models. Fits:FXD 1991-2005FX 1971-1984FLST...MSRP: $39.87$39.07 -
V-Twin - 16-1849 - Adapter Screw
Motorshop
MSRP: $15.86$15.70V-Twin - 16-1849 - Adapter ScrewDescriptionAdapter screws fits 1991-up XL Fits:Special application with clutch compressor tool on 1991-up XL.Additional InformationMSRP: $15.86$15.70 -
V-Twin - 16-1847 - Shock Absorber Tool Bolt
Motorshop
$46.20V-Twin - 16-1847 - Shock Absorber Tool BoltDescriptionShock bolt is for shock absorber tool. Fits:Replacement application for shock absorber tool.Additional Information$46.20 -
V-Twin - 16-1845 - Cylinder Assembly Tool
Jims
$106.70V-Twin - 16-1845 - Cylinder Assembly ToolDescriptionThe cylinder assembly tool allows for installation of stud to correct height. Fits:FXST 1984-1998FLT 1984-1998XL 1986-UPFXD 1991-1998FXR...$106.70 -
V-Twin - 16-1842 - Pingel Head Holder Tool
Pingel
$79.10V-Twin - 16-1842 - Pingel Head Holder ToolDescriptionThe Pingel head holder tool has 12 and 14mm ends to hold the head through spark plug hole, by support in a vise.The Pingel head holder tool is...$79.10 -
V-Twin - 16-1838 - Jims Rod Race Press Tool
Jims
$416.90V-Twin - 16-1838 - Jims Rod Race Press ToolDescriptionThe Jims rod race press tool makes for easy installation or extraction of rod races and making it easy to support without bending rods. Fits:FXST...$416.90 -
V-Twin - 16-1835 - Case Lap Tool
Jims
$1,452.07V-Twin - 16-1835 - Case Lap ToolDescriptionJims case lap tool features a lap which is supported on both sides by a pilot on the bushing side and plate which locates on the case pins of the cam cover...$1,452.07 -
V-Twin - 16-1834 - Timken Bearing Remover Tool
Jims
$400.32V-Twin - 16-1834 - Timken Bearing Remover ToolDescriptionJims Timken bearing remover tool removes the bearing from the shaft without removing the shaft from the flywheel. Fits:FX 1971-1984FL...$400.32 -
V-Twin - 16-1832 - Lap Head Pilot Tool
Eastern Motorcycle Parts
$138.52V-Twin - 16-1832 - Lap Head Pilot ToolDescriptionEngine type lap head pilot tool, sold by the each and for Eastern tool only. Fits:Replacement applicationAdditional Information$138.52 -
V-Twin - 16-1823 - Crankshaft Bushing Plate Pilot and Reamer
Eastern Motorcycle Parts
$591.48V-Twin - 16-1823 - Crankshaft Bushing Plate Pilot and ReamerDescriptionThe crankshaft bushing plate pilot and reamer reams in board camshaft and camshaft crankcase bushing. Fits:XL 1991-UPAdditional...$591.48 -
V-Twin - 16-1820 - Pinion Bushing Drill Jig Tool
Jims
$93.72V-Twin - 16-1820 - Pinion Bushing Drill Jig ToolDescriptionThe cam and pinion bushing drill jig tool allows the installation and drilling of a dowel pin to factory location. Fits:FL 1941-1954EL...$93.72 -
V-Twin - 16-1814 - Cam Bushing Drill Jig Tool
Jims
$93.72V-Twin - 16-1814 - Cam Bushing Drill Jig ToolDescriptionThe cam bushing drill jig allows the installation and drilling of a dowel pin to factory location. Supplied with #31 drill by Jims. Fits:FL...$93.72 -
V-Twin - 16-1810 - Crank Flywheel Nut Socket Tool
Jims
$132.36V-Twin - 16-1810 - Crank Flywheel Nut Socket ToolDescriptionThe Jims flywheel nut socket features a low profile to give 100% nut contact, machined flat at nut receiving end to eliminate rounding off...$132.36 -
V-Twin - 16-1807 - Clutch Adjuster Gauge Tool Set
Motorshop
MSRP: $15.86$15.70V-Twin - 16-1807 - Clutch Adjuster Gauge Tool SetDescriptionThis 3 piece set of clutch adjusting gauges are used to find the correct distance between the outer drive plate and oute r releasing disc...MSRP: $15.86$15.70 -
V-Twin - 16-1804 - Rocker Arm Bushing Reamer Tool
Jims
$367.43V-Twin - 16-1804 - Rocker Arm Bushing Reamer ToolDescriptionThe Jims rocker arm bushing reamer tool is used to ream rocker bushings to a factory fit of .0007"-.0012" in line with each other. Fits:All...$367.43 -
V-Twin - 16-1799 - Adjustable Reamer Kick Starter Shaft Tool - Fits 1937-1948 Harley-Davidson UL, 1952-1956 K, 1957-1979 XL, 1971-1984 FX, 1936-1940 EL, 1941-1984 FL
V-Twin Mfg
$247.90Adjustable reamer kick starter shaft tool is to use to fit inner diameter on new bushings. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX 1971-1984EL 1936-1940FL 1941-1984Additional Information$247.90 -
V-Twin - 16-1798 - Adjustable Reamer Main Drive Gear Tool - Fits 1971-1984 Harley-Davidson FX, 1941-1984 FL
V-Twin Mfg
$245.98Use this adjustable reamer to fit I.D. on new bushings. Fits:FX 1971-1984FL 1941-1984Additional Information UOM1 - EA$245.98 -
V-Twin - 16-1795 - Main Bearing End Play Tool
Eastern Motorcycle Parts
$109.96V-Twin - 16-1795 - Main Bearing End Play ToolDescriptionThis plug tool allows the setting of proper end play by selection of proper spacer. Use when refitting bearings or bearing sets on late models...$109.96 -
V-Twin - 16-1789 - inchT inch Handle Hex Lug Wrench Tool 7/16 inch
Motorshop
$32.07V-Twin - 16-1789 - inchT inch Handle Hex Lug Wrench Tool 7/16 inchDescriptionWheel lug wrench tool with "T" handle, 7/16" hex for 1936-1972 wheel lug bolts. Fits:UL 1937-1948 front or rearEL...$32.07 -
V-Twin - 16-1775 - Clutch Drum Locking Tool
Motorshop
$61.08V-Twin - 16-1775 - Clutch Drum Locking ToolDescriptionUse this clutch drum lock tool to remove clutch hub and motor nuts easily. Fits:FXST 1984-1989FXR 1984-1989FLST 1986-1989FLT 1984-1989Additional...$61.08 -
V-Twin - 16-1774 - Bench Valve Spring Tool
Motorshop
$210.60V-Twin - 16-1774 - Bench Valve Spring ToolDescriptionThe Sifton valve spring tool is bench mounted to compress springs on engines and also used for checking valve travel and coil bind of the valve...$210.60 -
V-Twin - 16-1769 - Clutch Compressor Tool
Motorshop
MSRP: $15.86$15.70V-Twin - 16-1769 - Clutch Compressor ToolDescriptionThe clutch compressor tool allows disassembly of the clutch pack. Fits:Special application with clutch compressor tool on 1991-up XLAdditional...MSRP: $15.86$15.70
About Tools
Harley Specialty Tools for Engine, Primary and Chassis Work
Some jobs you can't do right without the right tool. We stock the Harley-specific tools that save a cam chest, a primary or a weekend, plus the roll to carry them in. Brands include Jims, Motion Pro, Feuling, Barnett, Drag Specialties, V-Twin Mfg and Cruz Tools.
Tools by Job
- Primary and clutch: Jims primary locking bars from 4-speed Big Twins through M8 Softail, plus clutch spring tools
- Cam chest and engine: cam bearing installers, pinion gear locks, crankshaft tools and pushrod tools
- Front end and wheels: 39mm fork cap sockets and spoke wrenches
- Chain: chain breakers and riveting tools
- Lifts: center jacks
- On the road: tool rolls and mini T-handles
Before You Order
Engine and primary tools are made for one engine family and year range, and a Twin Cam tool won't do an M8. The fitment is in every listing. Doing the job anyway? See engine parts, clutch parts, chain kits & sprockets, fork tubes and oil change kits.
Not Sure It Fits?
Engine family and year both matter, and plenty of tools look the same but aren't. If you can't tell whether something fits your bike, hit us up with your year and model and we'll check it before you order.