1967

V-Twin - 32-2094 - Magneto Inner Stud Mount SetDescriptionMagneto inner stud mount set.The advance stop pins features slotted head with left hand threads. Fits:FL 1941-1969EL 1936-1952Additional...

V-Twin - 32-2079 - XLCH Burkhardt Magneto AssemblyDescriptionBurkhardt Magneto assembly. Fits:G 1941-1973XLCH 1957-1970W 1941-1952Additional Information

V-Twin - 32-2045 - 1965-1984 FL Electric Starter Kit Description Electric starter kit mounts to existing alloy cast inner to accept a high torque 12 volt starter. Motor includes the integral Bendix...

V-Twin - 32-2036 - Tail Lamp Spiral Cover SetDescriptionTail lamp spiral cover set is used on the rear fender to protect the tail lamp wire. The cover is a steel "slinky" spring type.Flexible spring,...

V-Twin - 32-2029 - Burkhardt Magneto Base CastDescriptionBurkhardt magneto base cast is clearanced for the "heavy duty" S.T.D., S&S and V-Twin brand cases.Ball features a milled groove for clearance...

Magneto advance arm with magnet.The magnet is used to hold the arm in position by adhering to the points cover screw. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information

Magneto advance post for advance arm kit. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA

Burkhardt offset Big Twin magneto base assembly includes the shaft, shaft drive spiral gear and (2) drive gears.For magneto installation. Assembly fits stock Big Twin cases. Fits:FL...

Main dash coil wiring harness assembly runs from the dash panel to the OEM type terminal box mounted behind the coil or dual point coils.*NOTE: Made from 16 gauge cotton braided over vinyl wire with...

Burkhardt Magneto rotor assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT Manu

Burkhardt Magneto lower drive assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT

XLCH Magneto advance assembly includes all necessary pieces to have a cable operated advance on XL-WL magnetos. Fits:XL 1957-1970Additional Information UOM

Horn and dimmer switch set is an accurate replica. Switches include cloth covered wires as the original. The dimmer switch is 3 wire and the horn button is 1 wire. Both switches is developed with new...

XLH battery cable set for electric start models.Sold as a set of 3, which includes one 8-1/2" braided flat unsheathed battery cable and two 15-1/2" black positive battery cables. Fits:XLH...

Left hand magneto points base plate.Left hand rotation is opposite of the standard Harley rotation. Fits:FL 1941-1969EL 1936-1952Additional Information

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes,...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information

Early 3 way key switch features a die cast body with the off/on/on positions, and includes 2 small early style brass Chicago style brass keys, for XLCH applications.Threaded body has a 3/4" outer...

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Chrome alternator bolts on in place of original 12 volt generator. Includes chrome solid state regulator, gear, gasket and mount screw set.Features high power output, 17 amps @ 1000 rpm. *NOTE: On...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

XLH battery cable set includes a black positive/negetive 15-1/2" cable and a braided flat negative 9-1/2" cable.Sold as a set of 2. Fits:XLH 1967-1978Additional Information

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

2020 new production replica dimmer switch with cloth covered wires.Switch may be painted if desired. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J 1926-1929Additional Information

V-Fire completed electronic distributor assembly includes the reverse distributer drive gear conversion to convert to the reverse rotation.*NOTE: Distributor includes internals that require reverse...

V-Fire distributor assembly includes top cover, clip, shaft assembly with reverse tooth gear installed and sensor cup.Distributor is designed for a late model electric ignition and uses a reverse...

Dimmer switch rebuild kit replaces the inter components of the switch.Includes a dimmer switch lever, brass plate backlite insulator, contact base, brass contact, rivets and spring. Fits:UL...

Headlamp socket wire includes cloth covered wires and correct bulb 3-prong connector plug. Fits:FL 1960-1969Additional Information OEM No.67753-60

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA

Wiring harness kit features cotton braided wire and asphalt loom. Wiring kit fits early Big Twin models.Order handlebar and tail lamp wires separately. Fits:FLH 1965-1969FL 1965-1969Additional...

Directional switch is a three position type with three cloth covered wires. Includes one each of green, red, and black wires and chrome plated housing.Switch features bottom exit wires, and stainless...

V-Fire Big Twin auto advance distributor assembly features a chrome plated base, body and top. Distributor is completely assembled with gear and all internal parts.Includes updated auto advance...

Battery cable is braided, flat, and unsheathed ground strap.Fits negative terminal on battery. Fits:XLH 1967-1972Additional Information OEM No.7023